About Sleeving
More
Interference-Shielding Expandable Sleeving
Protect wire and cable from signal distortion caused by nearby equipment and devices. Expandable, this sleeving stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. This sleeving is also used to insulate and organize wire and cable. Cut to size with sheet metal snips.
Copper sleeving is more conductive than aluminum sleeving, so it resists more signal interference.
Aramid fabric sleeving combines the benefits of copper and aluminum sleeving. It’s shielded with copper foil to resist high amounts of signal interference, while the aramid fabric weighs half as much and reflects more heat than copper alone.
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | Expanded ID | Wall Thick. | Temperature Range, °F | Lengths, ft. | 1-99 | 100-Up | |
| 1/8" | 5/32" | 1/32" | Not Rated | 00000000 | 00000 | 00000 | |
| 1/4" | 5/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 3/8" | 7/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 1/2" | 9/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 9/16" | 23/32" | 1/32" | Not Rated | 00000000 | 0000 | 0000 | |
| 25/32" | 7/8" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 7/8" | 1 1/8" | 1/32" | Not Rated | 00000000 | 00000 | 0000 | |
| 1" | 1 1/8" | 1/16" | Not Rated | 0000000 | 00000 | 0000 | |
| 1 1/8" | 1 1/4" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 1 1/4" | 1 3/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 1 1/2" | 1 5/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 2" | 2 19/32" | 1/16" | Not Rated | 00000000 | 00000 | 00000 | |
Interference-Shielding Tape Sleeving
With a copper and nickel exterior and conductive lining, this sleeving shields your wire and cable from signal interference. Use it near equipment that creates signal distortion, such as transformers, generators, and motors. It’s made of polyester taffeta cloth, so it’s light and flexible. Plus, its coating resists corrosion.
You can wrap this sleeving like tape around wire and cable while they’re installed, so it’s great for emergency patches. When wrapping, make sure it overlaps itself by half its width. This ensures 98% shielding coverage to keep your components protected.
| Wd. | Thick. | Temperature Range, °F | Shield Type | Color | Each | |
10 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
Nickel-Plated Polyester Fabric with Copper Coating | ||||||
| 1" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 0000000 |
| 2" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 000000 |
25 ft. Lg. | ||||||
Nickel-Plated Polyester Fabric with Copper Coating | ||||||
| 1" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 000000 |
| 2" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 000000 |
50 ft. Lg. | ||||||
Nickel-Plated Polyester Fabric with Copper Coating | ||||||
| 1" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 000000 |
| 2" | 0.006" | -40° to 250° | Conductive Cloth | Gray | 0000000 | 000000 |