Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Insulation Type Insulation Type |
|---|
 | Jacket |
 | Sheet/Strip |
 | Banding |
Sleeving Type Sleeving Type |
|---|
 |  |
| Expandable | Corrugated |
System of Measurement System of Measurement |
|---|
|
ID ID |
|---|
Performance Properties Performance Properties |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Flexibility Flexibility |
|---|
 | Flexible |
Minimum Temperature Minimum Temperature |
|---|
|
Texture Texture |
|---|
|
Backing Type Backing Type |
|---|
|
About Sleeving
More
High-Temperature Expandable Sleeving
Protect cable, hose, and pipe from abrasion and cuts in high temperature environments—this sleeving withstands temperatures over 450° F. It expands to fit over items for easy installation; sleeving then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate.
Stainless steel sleeving has excellent corrosion resistance, so it provides good protection in damp and wet locations, such as near process water. It also has excellent abrasion resistance and can stand up to cuts and rough surfaces near equipment on a plant floor. Use sheet metal snips to cut.
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | Expanded ID | Wall Thick. | Temperature Range, °F | Length, ft. | 1-99 | 100-Up | |
Stainless Steel | |||||||
| 1/4" | 5/16" | 1/32" | Not Rated to 800° | 000000 | 00000 | 00000 | |
| 3/8" | 7/16" | 1/32" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 1/2" | 9/16" | 1/32" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 25/32" | 7/8" | 1/32" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 1" | 1 1/8" | 1/16" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 1 1/8" | 1 1/4" | 1/16" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 1 1/4" | 1 3/8" | 1/16" | Not Rated to 800° | 000000 | 0000 | 0000 | |
| 1 1/2" | 1 5/8" | 1/16" | Not Rated to 800° | 000000 | 0000 | 0000 | |
Corrugated Sleeving
Slide this sleeving over wire, cable, or hose before adding connectors or making electrical connections. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility. It’s ultra-flexible so it’s good for applications that require tight turns.
Stainless steel sleeving is more corrosion resistant than steel and withstands higher temperatures.
| ID | OD | Temperature Range, °F | Lengths, ft. | Per Ft. | |
Stainless Steel | |||||
|---|---|---|---|---|---|
| 5/32" | 1/4" | -420° to 1600° | 00000000 | 00000 | |
| 3/16" | 9/32" | -420° to 1600° | 00000000 | 0000 | |
| 7/32" | 5/16" | -420° to 1600° | 00000000 | 0000 | |
| 1/4" | 11/32" | -420° to 1600° | 00000000 | 0000 | |
| 5/16" | 13/32" | -420° to 1600° | 00000000 | 0000 | |
| 3/8" | 1/2" | -420° to 1600° | 00000000 | 0000 | |
| 1/2" | 5/8" | -420° to 1600° | 00000000 | 0000 | |
| 3/4" | 31/32" | -420° to 1600° | 00000000 | 0000 | |
Metal Pipe Insulation Jacketing
Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors. Install with banding (not included).
Stainless steel jacketing is suitable for washdown applications.
Smooth sheets are easy to clean.
Pipe Insulation Banding
Save installation time with banding that’s ready to use. It has an easy-to-close fastener on one end.
Blue banding can be used to identify asbestos-free insulation.
| ID | Thick. | Wd. | Material | Flexibility | Choose a Color | Each | |
| 3 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 00000 | |
| 4" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 4 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 5" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 5 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 6 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 7 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 8 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 9 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 000000 | 0000 | |
| 10 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 0000000 | 0000 | |
| 11 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 0000000 | 0000 | |
| 12 1/2" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 0000000 | 0000 | |
| 16" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 0000000 | 0000 | |
| 18" | 0.02" | 1/2" | 304 Stainless Steel | Flexible | 0000000 | 0000 |