Jack Type Jack Type | Show |
|---|
 | Stand |
Capacity Capacity |
|---|
|
Application Application |
|---|
|
Minimum Height Minimum Height |
|---|
|
|
Holding Capacity Holding Capacity |
|---|
|
Power Source Power Source |
|---|
|
Body Material Body Material |
|---|
|
Maximum Lift Maximum Lift |
|---|
|
Body Finish Body Finish |
|---|
|
Capacity per Pair Capacity per Pair |
|---|
|
|
Body Color Body Color |
|---|
 | Fluorescent Yellow |
Adjustment Type Adjustment Type |
|---|
|
Wheel Configuration Wheel Configuration |
|---|
 |  |
| Two Axle- Mounted Wheels | Three Axle- Mounted Wheels |
Handle Length Handle Length |
|---|
|
Screw Jack Stands
Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Base Dia. | Each | |
| 2 1/2 | 5,000 | 25 | 50,000 | 44"-51" | 7" | 5" | 5" | 14" | 0000000 | 0000000 |
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39 1/2"-51" | 11 1/2" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39 1/2"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber, Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip for Stationary Jack Stands | __ | __ | __ | 0000000 | 00000 |
| Grip for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 0000 |
| Handle for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle for Mobile Jack Stands | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel Kit for Mobile Jack Stands | Three Axle-Mounted Wheels | Steel | 1 Wheel, Mounting Fasteners | 0000000 | 00000 |
| Wheel Kit for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Ratchet Jack Stands
The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 12" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39 1/2"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber and Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 00000 |
| Handle | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel Kit | Three Axle-Mounted Wheels | Steel | 1 Wheel, Mounting Fasteners | 0000000 | 00000 |
| Wheel Kit | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Jack Stands—Not for Lifting
After raising a load, add these steel stands for support.
Locking handles lock the ratchet bar in place to support the load.
Locking pins are inserted through the riser to lock the bar in place.
Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity per Pair | Saddle | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Ht. Adjustment Increments | Dia. | Lg. | Wd. | Dia. | Lg. | Wd. | Pair | ||
Locking Handle | ||||||||||||
| A | 3 | 6,000 | 12"-17 3/4" | 9/16" | __ | 1" | 3 1/2" | __ | 7 1/2" | 8 1/4" | 0000000 | 000000 |
| A | 6 | 12,000 | 15 5/8"-23 3/4" | 11/16" | __ | 1 1/4" | 4 1/4" | __ | 10 3/8" | 11 5/8" | 0000000 | 000000 |
Locking Pin | ||||||||||||
| B | 12 | 24,000 | 19"-29 1/2" | 1 1/2" | __ | 3" | 6" | 15 7/8" | __ | __ | 0000000 | 000000 |
| C | 20 | 40,000 | 15 1/4"-24" | 3" | 6" | __ | __ | __ | 15 1/2" | 15 1/2" | 0000000 | 00000000 |