Jacobs Taper-Mount Keyless Drill Chucks
A self-tightening design causes these chucks to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Jacobs | |||||||||
| 0.012"-0.255" | 0.3-6.5 | 1 | Standard | Steel | Steel | 20,000 | JKP 65-J1 | 2844A49 | 0000000 |
| 0.012"-0.315" | 0.3-8 | 2S | Standard | Steel | Steel | 15,000 | JKP 80-J2S | 2844A51 | 000000 |
| 0.02"-0.394" | 0.5-10 | 2 | Standard | Steel | Steel | 12,000 | JKP 100-J2 | 2844A52 | 000000 |
| 0.02"-0.394" | 0.5-10 | 33 | Standard | Steel | Steel | 12,000 | JKP 100-J33 | 2844A53 | 000000 |
| 0.039"-0.512" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | JKP 130-J2 | 2844A54 | 000000 |
| 0.039"-0.512" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | JKP 130-J6 | 2844A56 | 000000 |
| 0.039"-0.512" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | JKP 130-J33 | 2844A55 | 000000 |
| 0.118"-0.63" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | JKP 160-J6 | 2844A57 | 000000 |
Extra-Grip Jacobs Taper-Mount Keyless Drill Chucks
Use the included spanner wrench to tighten the chuck for up to three times the gripping torque of hand tightening. These chucks grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Jacobs | |||||||||
| 0"-0.255" | 0-6.5 | 1 | Standard | Steel | Steel | 10,000 | JKT 65-J1 | 28305A59 | 0000000 |
| 0.039"-0.512" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | JKT 130-J2 | 28305A62 | 000000 |
| 0.039"-0.512" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | JKT 130-J6 | 28305A64 | 000000 |
| 0.039"-0.512" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | JKT 130-J33 | 28305A63 | 000000 |
| 0.118"-0.63" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | JKT 160-J6 | 28305A65 | 000000 |
Albrecht Taper-Mount Keyless Drill Chucks
A self-tightening design causes these chucks to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
Also Available: Replacement hoods, ball bearing sets, collars, jaws sets, jaw guides, shells, drive pins, and body and spindle assemblies. Select 2825A6 and specify replacement part and Albrecht model number.
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | |||||||||
| 0.008"-1/16" | 0-1.5 | 0 | Standard | Steel | Steel | 50,000 | C15-J0 | 2823A11 | 0000000 |
| 0.015"-1/8" | 0-3 | 0 | Standard | Steel | Steel | 35,000 | C30-J0 | 2823A12 | 000000 |
| 0.015"-1/8" | 0-3 | 1 | Standard | Steel | Steel | 35,000 | C30-J1 | 2823A13 | 000000 |
| 0.015"-1/4" | 0-6.5 | 1 | Standard | Steel | Steel | 20,000 | C65-J1 | 2823A15 | 000000 |
| 0.015"-3/8" | 0-10 | 2 | Standard | Steel | Steel | 12,000 | C100-J2 | 2823A18 | 000000 |
| 0.015"-3/8" | 0-10 | 33 | Standard | Steel | Steel | 12,000 | C100-J33 | 2823A17 | 000000 |
| 1/32"-1/2" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | C130-J2 | 2823A21 | 000000 |
| 1/32"-1/2" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | C130-J6 | 2823A22 | 000000 |
| 1/32"-1/2" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | C130-J33 | 2823A19 | 000000 |
| 1/8"-5/8" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | C160-J6 | 2823A23 | 000000 |
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| C15-J0 | 2825A83 | 000000 |
| C30-J0, C30-J1 | 2825A84 | 00000 |
| C65-J1 | 2825A86 | 00000 |
| C100-J2, C100-J33 | 2825A88 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A12 | 00000 |
| C160-J6 | 2825A13 | 00000 |
Body and Spindle Assembly | ||
| C15-J0 | 2825A62 | 000000 |
| C30-J0, CH30-J0 | 2825A63 | 000000 |
| C30-J1 | 2825A64 | 000000 |
| C65-J1 | 2825A19 | 000000 |
| C100-J2 | 2825A68 | 000000 |
| C100-J33 | 2825A67 | 000000 |
| C130-J2 | 2825A22 | 000000 |
| C130-J6 | 2825A23 | 000000 |
| C130-J33 | 2825A21 | 000000 |
| C160-J6 | 2825A24 | 000000 |
Collar | ||
| C15-J0 | 2825A43 | 000000 |
| C30-J0, C30-J1 | 2825A4 | 000000 |
| C65-J1 | 2825A46 | 00000 |
| C100-J2, C100-J33 | 2825A48 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A14 | 00000 |
| C160-J6 | 2825A15 | 00000 |
Drive Pin | ||
| C15-J0 | 2825A01 | 00000 |
| C30-J0, C30-J1 | 2825A02 | 00000 |
| C65-J1 | 2825A04 | 00000 |
| C100-J2, C100-J33 | 2825A06 | 00000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A07 | 00000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A08 | 00000 |
Hood | ||
| C15-J0 | 2825A49 | 000000 |
| C30-J0, C30-J1 | 2825A51 | 000000 |
| C65-J1 | 2825A53 | 000000 |
| C100-J2, C100-J33 | 2825A56 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A11 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A57 | 000000 |
Jaw Guide | ||
| C15-J0 | 2825A25 | 000000 |
| C30-J0, C30-J1 | 2825A26 | 000000 |
| C65-J1 | 2825A28 | 000000 |
| C100-J2, C100-J33 | 2825A16 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A17 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A18 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A77 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A78 | 000000 |
Shell | ||
| C15-J0 | 2825A91 | 00000 |
| C30-J0, C30-J1 | 2825A92 | 00000 |
| C65-J1 | 2825A94 | 00000 |
| C100-J2, C100-J33 | 2825A96 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A97 | 00000 |
| C160-J6 | 2825A98 | 00000 |
Thread-Mount Keyless Drill Chucks for DeWalt,
Milwaukee, and Makita Cordless Drills
Choose a DeWalt, Makita, or Milwaukee brand chuck or a Jacobs brand equivalent that matches your cordless drill model number. These chucks mount directly onto the threaded spindle of your drill.
For Bit Shank Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Manufacturer Model Number | For DeWalt Model Number | For Makita Model Number | For Milwaukee Model Number | Mounting Hole Thread Size  | Body Material | Jaw Material | Each | |
| 3/64"-3/8" | 1-9.5 | 30354 | DW961 | 6201D, 6203D, 6211D, 6213D, 6217D, 6226D, 6227D, 6228D, 6233D, 6260D, 8402VD, DA312D, DA391D, DA392D | 0502-02 | 3/8"-24 | Steel | Steel | 28165A32 | 000000 |
| 1/16"-1/2" | 1.6-12.7 | 31037 | DW972 | __ | 0512-21 | 3/8"-24 | Steel | Steel | 28165A37 | 00000 |
| 1/16"-1/2" | 1.6-12.7 | 31038 | DC720, DC728, DC730, DC759, DC920, DC930, DC936, DC940, DC980, DC983, DC985, DC987, DC988, DW006, DW971, DW975, DW980, DW983, DW985, DW987, DW988, DW990, DW995, DW996, DW997 | 6336D, 6337D, 6343D, 6347D, BDF452, BHP452 | 0501-02, 0511-21, 0513-21, 0514-20, 0516-20, 0521-20, 0522-20, 0523-20, 0524-20, 0614-20, 0615-20, 0616-20, 0617-20, 0622-20, 0624-20, 0625-20, 0627-20, 0724-20, 1109-20, 3109-20 | 1/2"-20 | Steel | Steel | 28165A42 | 00000 |
Hex-Shank Drill Chucks for Power Screwdrivers and Impact Drivers
Adapt your power screwdriver, impact driver, or other hex-shank drive tool into a drill. These chucks have a 1/4" hex shank that slots into your tool’s hex drive. They’re also known as adapt-a-drive chucks.
Keyless chucks let you swap bits in and out with a quick twist of the sleeve. These chucks have a ratchet lock that secures bits tightly and absorbs vibration to prevent the jaws from loosening.
Jacobs chucks are the most widely used drill chucks.
For Bit Shank Size | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount Type | Inch | mm | Wt., lbs. | Jaw Material | Body Material | For Use With | For Tool Drive Direction | Features | Manufacturer Model Number | Each | |
Keyless | |||||||||||
Jacobs | |||||||||||
| 1/4" Hex Shank | 1/16"-3/8" | 1.5-10 | 0.6 | Steel | Steel | Power Screwdrivers, Impact Drivers | Clockwise, Counterclockwise | Ratchet Lock | 31248 | 28055A72 | 000000 |