These nuts have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts tighten to the left and won’t loosen from counterclockwise motion. Made from brass, they resist corrosion, conduct electricity, and are nonmagnetic. They’re half the height of standard hex nuts, so they’re good for use in low-clearance areas. Jam them against another nut to hold them in place. When used with a standard hex nut, they’re suitable for fastening most equipment.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. They have a nylon insert that grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Made from Grade 8 steel, they're about 25% stronger than medium-strength steel thin locknuts. All have a finish that resists corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

About half the height and 10% wider than standard nylon-insert locknuts, use these in low-clearance applications or jam one against an extra-wide hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Comparable in strength to Grade 8 bolts, these locknuts are about three times stronger than low-strength steel extra-wide thin locknuts.

Black-phosphate steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard flex-top locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. Threads at the top of the nut expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. These locknuts have equivalent strength to Grade 8 steel locknuts.

Plain steel locknuts are uncoated and ready for painting.

Cadmium-plated locknuts are corrosion resistant in wet environments. The plating adds lubricity so they thread on smoothly.

For technical drawings and 3-D models, click on a part number.