These nuts have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts tighten to the left and won’t loosen from counterclockwise motion. Made from brass, they resist corrosion, conduct electricity, and are nonmagnetic. They’re half the height of standard hex nuts, so they’re good for use in low-clearance areas. Jam them against another nut to hold them in place. When used with a standard hex nut, they’re suitable for fastening most equipment.

For technical drawings and 3-D models, click on a part number.

Also known as heavy jam nuts, these are about half the height and 10% wider than standard hex nuts. Use them in low-clearance applications or jam one against another extra-wide hex nut to hold it in place. They're often used in conjunction with an extra-wide hex nut to fasten Grade 9 bolts in heavy machinery, such as earth-moving equipment.

For technical drawings and 3-D models, click on a part number.

Also known as heavy jam nuts, these are about half the height and 10% wider than standard hex nuts. Use them in low-clearance applications or jam against another extra-wide hex nut to hold it in place. Made from low-strength steel, use them in light duty fastening applications, such as securing access panels.

For technical drawings and 3-D models, click on a part number.

Made from 18-8 stainless steel, these nuts have good chemical resistance and may be mildly magnetic. Also known as heavy jam nuts, they are about half the height and 10% wider than standard hex nuts. Use them in low-clearance applications or jam one against another extra-wide hex nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

Brass nuts are resistant to corrosion in wet environments, electrically conductive, and nonmagnetic. Also known as heavy jam nuts, they are about half the height and 10% wider than standard hex nuts. Use them in low-clearance applications or jam one against another extra-wide hex nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

Zinc-plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these locknuts in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. These nuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut. All have a finish that resists corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These locknuts have good chemical resistance and may be mildly magnetic. They're about half the height of standard nylon-insert locknuts. Use them in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

For technical drawings and 3-D models, click on a part number.

These locknuts are about half the height and 10% wider than standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against an extra-wide hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

Zinc-plated steel locknuts provide mild corrosion resistance in wet environments.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard steel-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut’s load to resist spinoff caused by vibration. They're often used in shakers and vibrating equipment. The strength of the bolt should match the strength of the nut to prevent damaging threads. Made from Grade 8 steel, these nuts are suitable for fastening most machinery and equipment.

For technical drawings and 3-D models, click on a part number.