Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids. These are rated NEMA 4X for protection from dirt, washdowns, and corrosion.

NEMA 12 rated enclosures also protect from oil/coolant dripping.

Panels are for mounting components inside enclosures.

For technical drawings and 3-D models, click on a part number.

These enclosures have thicker walls than standard aluminum enclosures, but they are still a lightweight yet durable alternative to stainless steel. They are rated NEMA 4X and IP66 for protection from dirt, washdowns, corrosion, and power jets of water.

For technical drawings and 3-D models, click on a part number.

Aluminum enclosures are a lightweight yet durable alternative to stainless steel. These withstand corrosive and wet environments. They are rated NEMA 4X for protection from dirt, washdowns, and corrosion.

IP66 rated enclosures protect components from power jets of water.

Panels are for mounting components inside enclosures.

For technical drawings and 3-D models, click on a part number.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments. Each has a sloped roof that lets liquid drain quickly without pooling. They’re IP69K rated, meaning they withstand the rigorous cleanings with high pressures and temperatures that are typical in food processing plants. Made of stainless steel, these enclosures won’t corrode from frequent contact with harsh cleaners and sanitizers.

The seal on these enclosures keeps water and other contaminants from getting in. It’s FDA-compliant for direct food contact, meaning it won’t contaminate food if it breaks off and falls into your line. It’s bright blue too, so it’s easy to spot and remove.

For use indoors or out, these enclosures are also NEMA 4X and NEMA 13 rated to protect against dirt, oil, water, and coolant. UL and C-UL listed, they meet U.S. and Canadian safety standards.

Enclosures with a lift-off cover have internal mounting bosses for attaching small electrical devices, components, and DIN rail.

Enclosures with a hinged cover have an internal hinge that lets the seal cover the entire door opening joint free. They have one or two locks, each of which has an external locking design without any crevices where water and bacteria could build up. Mount components to the removable panel.

To leave space for cleaning behind your enclosure, offset it from the wall with a sanitary standoff.

For technical drawings and 3-D models, click on a part number.

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

NEMA 13 rated enclosures offer protection from oil/coolant spraying.

Panels are for mounting components inside enclosures.

For technical drawings and 3-D models, click on a part number.

Inspect components without opening the cover. These enclosures are rated NEMA 4 and 12 for protection from dirt, washdowns, and oil/coolant dripping. The slotted latch opens with a quarter turn for easy access—no screws or clamps to unfasten.

Panels are for mounting components inside enclosures.

For technical drawings and 3-D models, click on a part number.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise. Use them near motors, generators, and other equipment that produces EMI or RFI. Enclosures protect the parts inside and also keep EMI/RFI generated within the enclosure from getting out.

To install parts inside the enclosure, screw a DIN rail or panel on to the internal mounting bosses, or mount components directly to the bosses using self-tapping screws. Use the outside mounting holes to attach the enclosure to a wall or surface. For more mounting flexibility, screw on wall-mount brackets where you need them.

Aluminum enclosures stop medium-range frequency interference in most applications. They have two gaskets—a woven steel gasket joins the two sides of the enclosure for continuous EMI/RFI shielding, and a silicone rubber gasket seals the enclosure to protect your equipment from wet, oily, and corrosive environments. Enclosures that meet IP65 protect the contents from washdowns, dust, and dirt. Enclosures that meet IP67 are submersible in one meter of water for up to 30 minutes and protect the contents from dust and dirt.

Zinc-plated steel enclosures block 10 times as much interference as aluminum enclosures. They protect sensitive components and precision measuring equipment, even when they’re close to sources of high-frequency EMI or RFI. A neoprene gasket seals the enclosure to keep out moisture; it’s covered in steel mesh to stop EMI/RFI noise from coming through the seam between the two halves of the enclosure. Enclosures are rated NEMA 12 and 13 to withstand oily and wet locations. UL listed, C-UL listed, and CSA certified, they meet American and Canadian safety standards.

Interference reduction at frequency, also known as attenuation, is how much EMI/RFI the enclosure blocks.

For technical drawings and 3-D models, click on a part number.