Long-Life T-Shank Jigsaw Blades for Metal
For a longer life than blades with a high-speed steel body, these blades have a carbon steel body that’s more flexible and less breakable. Also known as bimetal blades, their teeth are made of high-speed steel. They’re good for complex, intricate cuts with tight curves, so they’re often used to cut specific shapes out of sheet metal to fit a custom structure.
Choose more teeth per inch for a slower, smoother cut; choose fewer teeth per inch for a faster, rougher cut. Narrower blades give you more control for detailed cuts with tight curves, while wider blades give you more stability for straight cuts.
T-shank/U-shank blades fit in jigsaws with either shank type.
For Material Thick. | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Min. | Max. | Tooth | Body | For Use On | Pkg. Qty. | Pkg. | |
T-Shank | ||||||||||
2" Lg. | ||||||||||
| 3/16" | 0.04" | 24 | 3/32" | 5/8" | High-Speed Steel | Carbon Steel | Metal | 5 | 0000000 | 000000 |
| 5/16" | 0.04" | 24 | 3/32" | 5/8" | High-Speed Steel | Carbon Steel | Metal | 5 | 0000000 | 00000 |
| 5/16" | 0.04" | 32 | 1/16" | 7/16" | High-Speed Steel | Carbon Steel | Metal | 5 | 0000000 | 00000 |
3 5/8" Lg. | ||||||||||
| 5/16" | 0.04" | 12 | 1/8" | 1/4" | High-Speed Steel | Carbon Steel | Metal | 3 | 0000000 | 0000 |
| 5/16" | 0.04" | 30 | 1/64" | 3/64" | High-Speed Steel | Carbon Steel | Metal | 3 | 0000000 | 0000 |
4" Lg. | ||||||||||
| 3/8" | 0.04" | 24 | 3/32" | 5/8" | High-Speed Steel | Carbon Steel | Metal | 5 | 0000000 | 00000 |
5 1/4" Lg. | ||||||||||
| 5/16" | 0.04" | 12 | 5/64" | 5/16" | High-Speed Steel | Carbon Steel | Metal | 3 | 0000000 | 00000 |
| 5/16" | 0.04" | 21 | 1/16" | 1/8" | High-Speed Steel | Carbon Steel | Metal | 3 | 0000000 | 00000 |
T-Shank/U-Shank | ||||||||||
3" Lg. | ||||||||||
| 5/16" | 0.03" | 14 | 1/4" | 1" | High-Speed Steel | Carbon Steel | Metal | 2 | 0000000 | 0000 |
| 5/16" | 0.03" | 18 | 1/4" | 1" | High-Speed Steel | Carbon Steel | Metal | 2 | 0000000 | 0000 |
| 5/16" | 0.03" | 24 | 1/16" | 1/4" | High-Speed Steel | Carbon Steel | Metal | 2 | 0000000 | 0000 |
| 5/16" | 0.03" | 32 | __ | 1/16" | High-Speed Steel | Carbon Steel | Metal | 2 | 0000000 | 0000 |
3 1/2" Lg. | ||||||||||
| 5/16" | 0.04" | 6 | 1/4" | 1 1/2" | High-Speed Steel | Carbon Steel | Metal | 2 | 0000000 | 0000 |
Fast-Cut Long-Life T-Shank Jigsaw Blades for Metal
These progressive-tooth blades have small, fine teeth at the shank end that gradually increase to larger teeth at the tip for fast cutting. They're bimetal blades that have a carbon steel body with high-speed steel teeth for longer life than high-speed steel blades. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | For Material Thick. | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 1/4" Lg. | ||||||||||
| 5/16" | 0.05" | 14-18 | 1/16"-5/32" | High-Speed Steel | Carbon Steel | T-Shank | Metal | 5 | 0000000 | 000000 |
3 5/8" Lg. | ||||||||||
| 5/16" | 0.04" | 11-14 | 1/8"-1/4" | High-Speed Steel | Carbon Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
| 5/16" | 0.05" | 17-24 | 3/64"-1/8" | High-Speed Steel | Carbon Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
T-Shank Jigsaw Blades for Metal
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | For Material Thick. | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 5/8" Lg. | ||||||||||
| 5/16" | 0.04" | 36 | 1/64"-3/64" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 00000000 | 00000 |
4" Lg. | ||||||||||
| 5/16" | 0.04" | 8 | 3/16"-5/8" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
5 1/4" Lg. | ||||||||||
| 5/16" | 0.07" | 14 | 3/32"-15/64" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
| 3/8" | 0.05" | 24 | 3/64"-1/8" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
Extra-Long-Life T-Shank Jigsaw Blades for Metal
The carbide-tipped teeth on these blades are the hardest in our jigsaw blade offering, so they last the longest. An aluminum-alloy coating keeps these blades cool while cutting and helps prevent dulling. When blades stay cool, they’re less likely to harden the edges of your material or gum up from metal shards. They’re good for complex, intricate cuts with tight curves, so they’re often used to cut specific shapes out of sheet metal to fit a custom structure. Choose more teeth per inch for a slower, smoother cut; choose fewer teeth per inch for a faster, rougher cut.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | For Material Thick. | Tooth | Body | Shank Style | For Use On | Each | |
3 1/4" Lg. | |||||||||
| 3/8" | 0.05" | 18 | 1/16"-1/8" | Carbide-Tipped Steel | Aluminum Alloy-Coated High-Speed Steel | T-Shank | Metal | 0000000 | 000000 |
| 3/8" | 0.05" | 24 | 1/64"-3/64" | Carbide-Tipped Steel | Aluminum Alloy-Coated High-Speed Steel | T-Shank | Metal | 0000000 | 00000 |
3 5/8" Lg. | |||||||||
| 3/8" | 0.05" | 10 | 1/8"-1/4" | Carbide-Tipped Steel | Aluminum Alloy-Coated High-Speed Steel | T-Shank | Metal | 0000000 | 00000 |
Fast-Cut T-Shank Jigsaw Blades for Metal
Make quick cuts—this progressive-tooth blade has small, fine teeth at the shank end that gradually increase to larger teeth at the tip. The teeth bite into your material to make cuts. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting. These blades are narrow in profile, so they can cut complex and intricate shapes, including tight curves. However, they cut more slowly than reciprocating saw blades.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | For Material Thick. | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 5/8" Lg. | ||||||||||
| 5/16" | 0.04" | 11-14 | 1/8"- 1/4" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 00000000 | 00000 |
| 5/16" | 0.04" | 14-18 | 5/64"- 7/32" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 00000000 | 0000 |
| 5/16" | 0.04" | 17-24 | 1/16"- 1/8" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 00000000 | 00000 |
4" Lg. | ||||||||||
| 11/32" | 0.04" | 10-24 | 5/64"- 3/8" | High-Speed Steel | High-Speed Steel | T-Shank | Metal | 5 | 0000000 | 00000 |
Long-Life T-Shank Jigsaw Blades
Also known as bimetal blades, these have a carbon steel body and high-speed steel teeth that last up to four times longer than carbon steel teeth. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3" Lg. | |||||||||
| 3/16" | 0.04" | 10 | High-Speed Steel | Carbon Steel | T-Shank | Metal, Plastic, Wood, Wood with Nails | 5 | 0000000 | 000000 |
4" Lg. | |||||||||
| 5/16" | 0.04" | 8 | High-Speed Steel | Carbon Steel | T-Shank | Fiberglass, Metal, Plastic | 5 | 0000000 | 00000 |
| 5/16" | 0.04" | 8 | High-Speed Steel | Carbon Steel | T-Shank | Metal, Plastic, Wood, Wood with Nails | 5 | 0000000 | 00000 |
Fast-Cut Long-Life T-Shank Jigsaw Blades
Small, fine teeth at the shank end of this progressive-tooth blade gradually increase to larger teeth at the tip for fast cuts. Also known as a bimetal blade, it has a carbon steel body and high-speed steel teeth that last up to four times longer than carbon steel teeth.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
5 1/4" Lg. | |||||||||
| 3/8" | 0.05" | 5-10 | High-Speed Steel | Carbon Steel | T-Shank | Metal, Plastic, Wood, Wood with Nails | 5 | 0000000 | 000000 |
Extra-Long-Life T-Shank Jigsaw Blades
With carbide-tipped teeth—the hardest in our jigsaw blade offering—these blades last longer than bimetal blades. The high-speed steel body makes them stiffer than blades with a carbon steel body. That means they’re better at making straight cuts in hard and thick materials. They’re also narrow enough for complex, intricate cuts with tight curves. Use them for applications such as cutting specific shapes out of wood, plastic, sheet metal, and other flat materials to fit a custom structure.
Blades with 5-7 teeth per inch make quick cuts, thanks to their progressive-tooth design. Their tooth size gradually increases from small, fine teeth at the shank end to larger teeth at the tip.
Blades with an aluminum-alloy-coated body reduce heat buildup when cutting. This protects your material from burning and keeps dust from sticking to your blade and gumming it up. The coating also prevents the blade from dulling.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | Pkg. Qty. | Pkg. | |
4" Lg. | ||||||||
| 5/16" | 0.05" | 6 | Carbide-Tipped Steel | High-Speed Steel | T-Shank | 1 | 0000000 | 000000 |
5 1/4" Lg. | ||||||||
| 5/16" | 0.05" | 5-7 | Carbide-Tipped Steel | High-Speed Steel | T-Shank | 3 | 0000000 | 00000 |
| 5/16" | 0.05" | 5-7 | Carbide-Tipped Steel | Aluminum-Alloy-Coated High-Speed Steel | T-Shank | 1 | 0000000 | 00000 |
T-Shank Jigsaw Blades
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4" Lg. | |||||||||
| 9/32" | 0.06" | 10 | Carbon Steel | Carbon Steel | T-Shank | Plastic, Wood | 5 | 0000000 | 00000 |
Fast-Cut T-Shank Jigsaw Blades
This progressive-tooth blade has small, fine teeth at the shank end that gradually increase to larger teeth at the tip for fast cuts.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4" Lg. | |||||||||
| 9/32" | 0.06" | 5-6 | Carbon Steel | Carbon Steel | T-Shank | Plastic, Wood | 5 | 0000000 | 00000 |
T-Shank Jigsaw Blades for Wood
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting. T-shank/U-shank blades fit in both T-shank and U-shank jigsaws.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | For Use On | Pkg. Qty. | Pkg. | |
T-Shank | ||||||||
3" Lg. | ||||||||
| 3/16" | 0.05" | 12 | Carbon Steel | Carbon Steel | Wood | 2 | 0000000 | 00000 |
3 1/4" Lg. | ||||||||
| 5/32" | 0.05" | 20 | Carbon Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
4" Lg. | ||||||||
| 9/32" | 0.06" | 10 | Carbon Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
10" Lg. | ||||||||
| 5/8" | 0.07" | 6 | Carbon Steel | Carbon Steel | Wood | 1 | 0000000 | 0000 |
T-Shank/U-Shank | ||||||||
3 1/2" Lg. | ||||||||
| 5/16" | 0.03" | 6 | Carbon Steel | Carbon Steel | Wood | 2 | 0000000 | 0000 |
| 5/16" | 0.05" | 10 | Carbon Steel | Carbon Steel | Wood | 2 | 0000000 | 0000 |
Fast-Cut T-Shank Jigsaw Blades for Wood
The teeth at the shank end of this progressive-tooth blade are small and fine and gradually increase to larger teeth at the tip for fast cutting.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4 1/2" Lg. | |||||||||
| 3/8" | 0.06" | 8-12 | Carbon Steel | Carbon Steel | T-Shank | Wood | 5 | 0000000 | 000000 |
Long-Life T-Shank Jigsaw Blades for Wood
Also known as bimetal blades, these have a carbon steel body with high-speed steel teeth that last up to four times longer than carbon steel teeth. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting. T-shank/U-shank blades fit in both T-shank and U-shank jigsaws.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | For Use On | Pkg. Qty. | Pkg. | |
T-Shank | ||||||||
3" Lg. | ||||||||
| 3/16" | 0.03" | 12 | High-Speed Steel | Carbon Steel | Wood | 5 | 0000000 | 000000 |
4" Lg. | ||||||||
| 9/32" | 0.03" | 10 | High-Speed Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
4 1/2" Lg. | ||||||||
| 5/16" | 0.04" | 12 | High-Speed Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
T-Shank/U-Shank | ||||||||
4" Lg. | ||||||||
| 5/16" | 0.05" | 6 | High-Speed Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
| 5/16" | 0.05" | 10 | High-Speed Steel | Carbon Steel | Wood | 5 | 0000000 | 00000 |
Smooth-Cut Long-Life T-Shank Jigsaw Blades for Wood
Cut wood without leaving behind rough edges—these blades have teeth pointed in two directions to smooth both sides of your material as you cut. The upper teeth cut the top of your surface on the downstroke while the lower teeth cut the bottom on the upstroke. For quick cuts, the teeth are larger at the tip and shank end and smaller in the middle. Made with high-speed steel teeth, these blades last up to four times as long as blades with carbon steel teeth. Also known as bimetal blades, their body is carbon steel. They’re good for complex, intricate cuts with tight curves, so they’re often used to cut specific shapes out of wood to fit a custom structure.
Choose narrower blades for more control during detailed cuts with tight curves; choose wider blades for more stability during straight cuts.
Fast-Cut Long-Life T-Shank Jigsaw Blades for Wood
For fast cutting, this progressive-tooth blade has small, fine teeth at the shank end that gradually increase to larger teeth at the tip. It's also known as a bimetal blade and has a carbon steel body with high-speed steel teeth that last up to four times longer than carbon steel teeth.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4" Lg. | |||||||||
| 5/16" | 0.05" | 5-6 | High-Speed Steel | Carbon Steel | T-Shank | Wood, Wood with Nails | 5 | 0000000 | 000000 |
T-Shank Jigsaw Blades for Plastic
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 5/8" Lg. | |||||||||
| 3/8" | 0.05" | 12 | Carbon Steel | Carbon Steel | T-Shank | Plastic | 3 | 0000000 | 000000 |
4" Lg. | |||||||||
| 9/32" | 0.05" | 14 | High-Speed Steel | High-Speed Steel | T-Shank | Plastic | 5 | 0000000 | 00000 |
| 5/16" | 0.05" | 6 | Carbon Steel | Carbon Steel | T-Shank | Plastic | 3 | 0000000 | 0000 |
| 5/16" | 0.05" | 10 | Carbon Steel | Carbon Steel | T-Shank | Plastic | 3 | 0000000 | 0000 |
Long-Life T-Shank Jigsaw Blades for Plastic
The teeth on this carbon steel blade are high-speed steel, so it lasts longer than the standard t-shank blades for plastic. It's also known as a bimetal blade.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 5/8" Lg. | |||||||||
| 5/16" | 0.05" | 13 | High-Speed Steel | Carbon Steel | T-Shank | Plastic | 3 | 0000000 | 00000 |
Long-Life T-Shank Jigsaw Blades for Ceramics and Masonry
The edge of the blade is coated with diamond grit, which lasts longer than carbide grit when cutting through abrasive materials such as cement, brick, and tile. Choose medium grit for less material loss and a smooth cut; choose coarse grit for fast cutting.
T-Shank Jigsaw Blades for Ceramics and Masonry
Carbide grit is bonded to the edge of these blades to cut through abrasive materials such as cement, brick, stone, and tile. Choose medium grit for less material loss and a smooth cut; choose coarse grit for fast cutting.
T-Shank Jigsaw Blades for Soft Materials
Slice through soft materials such as leather, cardboard, and rubber with this knife-edge blade.
| Wd. | Thick. | Body Material | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4" Lg. | |||||||
|---|---|---|---|---|---|---|---|
| 9/32" | 0.05" | Carbon Steel | T-Shank | Cardboard, Leather, Rubber | 3 | 0000000 | 000000 |
U-Shank Jigsaw Blades for Metal
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
For Material Thick. | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Min. | Max. | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
2 3/4" Lg. | |||||||||||
| 9/32" | 0.03" | 14 | 1/4" | __ | High-Speed Steel | High-Speed Steel | U-Shank | Metal | 5 | 0000000 | 00000 |
| 9/32" | 0.03" | 18 | 1/8" | __ | High-Speed Steel | High-Speed Steel | U-Shank | Metal | 5 | 0000000 | 0000 |
| 9/32" | 0.03" | 24 | __ | 1/8" | High-Speed Steel | High-Speed Steel | U-Shank | Metal | 5 | 0000000 | 0000 |
Long-Life U-Shank Jigsaw Blades for Metal
Also known as a bimetal blade, this carbon steel blade has high-speed steel teeth and lasts longer than high-speed steel blades.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | For Min. Material Thick. | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
3 5/8" Lg. | ||||||||||
| 9/32" | 0.03" | 14 | 1/4" | High-Speed Steel | Carbon Steel | U-Shank | Metal | 5 | 0000000 | 000000 |
U-Shank Jigsaw Blades
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Long-Life U-Shank Jigsaw Blades
This carbon steel blade has high-speed steel teeth that last up to four times longer than carbon steel teeth. It's also known as a bimetal blade.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
4" Lg. | |||||||||
| 5/16" | 0.05" | 10 | High-Speed Steel | Carbon Steel | U-Shank | Plastic, Wood | 5 | 0000000 | 000000 |
Long-Life U-Shank Jigsaw Blades for Wood
These bimetal blades have a carbon steel body and high-speed steel teeth that last up to four times longer than carbon steel teeth. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Teeth per Inch | Tooth | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
2 3/4" Lg. | |||||||||
| 3/16" | 0.03" | 20 | High-Speed Steel | Carbon Steel | U-Shank | Wood | 5 | 0000000 | 000000 |
4" Lg. | |||||||||
| 9/32" | 0.03" | 6 | High-Speed Steel | Carbon Steel | U-Shank | Wood, Wood with Nails | 5 | 0000000 | 00000 |
4 1/8" Lg. | |||||||||
| 9/32" | 0.03" | 10 | High-Speed Steel | Carbon Steel | U-Shank | Wood, Wood with Nails | 5 | 0000000 | 00000 |
U-Shank Jigsaw Blades for Wood
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
U-Shank Jigsaw Blades for Ceramics and Masonry
These blades have carbide grit bonded to the edge to cut abrasive materials such as cement, brick, stone, and tile. Choose finer grit for less material loss and a smooth cut; choose coarser grit for fast cutting.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Abrasive | Body | Shank Style | For Use On | Pkg. Qty. | Pkg. | |
Coarse Grit | ||||||||
2 7/8" Lg. | ||||||||
| 3/16" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 00000 |
| 3/8" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 0000 |
Medium Grit | ||||||||
2 7/8" Lg. | ||||||||
| 3/8" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 0000 |
4" Lg. | ||||||||
| 3/4" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 0000 |
Fine Grit | ||||||||
2 7/8" Lg. | ||||||||
| 3/16" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 0000 |
| 3/8" | 0.03" | Carbide | Steel | U-Shank | Ceramics, Fiberglass, Masonry, Tile | 1 | 0000000 | 0000 |
T-Shank Jigsaw Blade Assortments
Keep a convenient mix of jigsaw blades on hand. Whether you’re making smooth cuts in wood or rough-cutting metal, these sets have you covered. They’re great for complex, intricate cuts and tight curves. And for quick cuts, all include blades with teeth that progressively increase in size from small, fine teeth at the shank end to larger teeth at the tip.
Choose more teeth per inch for a slower, smoother cut; choose fewer teeth per inch for a faster, rougher cut.
Blades with high-speed steel teeth last up to four times longer than carbon steel teeth. Carbon steel blades with high-speed steel teeth are also known as bimetal blades. Blades with carbide-tipped teeth, the hardest in our jigsaw blade offering, last longer than bimetal blades.
| Number of Pieces | Includes | Shank Style | Each | |
| 5 | 4" Long Carbon Steel Blade with Carbon Steel Teeth for Wood (6 Teeth per Inch) 4" Long Carbon Steel Blade with Carbon Steel Teeth for Wood (10 Teeth per Inch) 3 1/4" Long Carbon Steel Blade with Carbon Steel Teeth for Wood (12 Teeth per Inch) 3 5/8" Long High-Speed Steel Blade with High-Speed Steel Teeth for Metal (11-14 Teeth per Inch) 3 5/8" Long High-Speed Steel Blade with High-Speed Steel Teeth for Metal (17-24 Teeth per Inch) | T-Shank | 0000000 | 00000 |
| 5 | 4" Long Carbon Steel Blade with Carbon Steel Teeth for Wood (6 Teeth per Inch) Two 4" Long Carbon Steel Blades with Carbon Steel Teeth for Wood (10 Teeth per Inch) 3 5/8" Long High-Speed Steel Blade with High-Speed Steel Teeth for Metal (17-24 Teeth per Inch) 3 1/4" Long Carbon Steel Blade with Carbon Steel Teeth for Wood (20 Teeth per Inch) | T-Shank | 00000000 | 0000 |
| 5 | Two 2" Long Carbon Steel Blades with High-Speed Steel Teeth for Metal (24 Teeth per Inch) 2" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal (32 Teeth per Inch) 4" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal and Wood (10-14 Teeth per Inch) 2" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal and Wood (14 Teeth per Inch) | T-Shank | 00000000 | 00000 |
| 14 | Three 4" Long Carbon Steel Blades with Carbon Steel Teeth for Wood (6 Teeth per Inch) Three 4" Long Carbon Steel Blades with Carbon Steel Teeth for Wood (10 Teeth per Inch) Two 3 1/4" Long Carbon Steel Blades with Carbon Steel Steel Teeth for Wood (12 Teeth per Inch) 2 1/2" Long High-Speed Steel Blade with Carbide-Tipped Steel Teeth for Wood (14 Teeth per Inch) Two 3 5/8" Long High-Speed Steel Blades with High-Speed Steel Teeth for Metal (11-14 teeth per Inch) 4" Long High-Speed Steel Blade with High-Speed Steel Teeth for Metal (10-24 Teeth per Inch) Two 3 5/8" Long High-Speed Steel Blades with High-Speed Steel Teeth for Metal (17-24 teeth per Inch) | T-Shank | 00000000 | 00000 |
U-Shank Jigsaw Blade Assortments
Also known as bimetal blades, these have a carbon steel body with high-speed steel teeth.
| Number of Pieces | Includes | Shank Style | Each | |
| 5 | 2 3/4" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal (18 Teeth per Inch) 2 3/4" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal (24 Teeth per Inch) 3 5/8" Long Carbon Steel Blade with High-Speed Steel Teeth for Metal (14 Teeth per Inch) 4" Long Carbon Steel Blade with High-Speed Steel Teeth for Wood (6 Teeth per Inch) 4" Long Carbon Steel Blade with High-Speed Steel Teeth for Wood (10 Teeth per Inch) | U-Shank | 0000000 | 000000 |