Create strong joints in wood and wood composite.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Use at pressures up to 250 psi.

Barbs grip onto tubing.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Use these fittings for low-pressure applications in noncorrosive environments.

Joints are for two-way flow and are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

Joints are for two-way flow and are brass for good corrosion resistance.

Joints are for one-way flow and are brass for good corrosion resistance.

Supply air to two different rotating objects from a stationary supply.

These joints weld to unthreaded pipe or another butt-weld fitting for a leak-resistant permanent connection.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

These joints are designed for vertical use in drain, waste, and vent systems.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

These two-piece fittings screw directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose. Use in high-pressure hydraulic applications up to 5,800 psi.

Connect these fittings to air tools for pneumatic applications.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints.

Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.

Made of stainless steel, these ball joint linkages offer more corrosion resistance than steel and zinc ball joint linkages.

Along with excellent wear resistance, these linkages have a grease fitting for easy lubrication. An internally threaded rod end connects to threaded rods, studs, and other parts with male threads.

Able to stand up to frequent use, these linkages offer excellent wear resistance. They consist of ball joint rod ends with a ball stud attached to simplify mounting.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

These linkages offer excellent wear resistance. They consist of internally threaded ball joint rod ends with a ball stud attached to simplify mounting.

Use these linkages to create inline pivoting connections. They have internal threads on one end and external threads on the other.

These ball joint linkages are made of steel.

Customize the bore size of these joints to fit your shaft. Each end has a small centered starter hole that makes drilling easy.

These pin-and-block style U-joints work at lower speeds but transmit greater torque than needle-bearing joints.