Ball Joint Rod End Covers
Shield ball joint rod ends to keep lubricants in and contaminants out. These covers stretch to fit over joints. Use lubricant and an installation tool (both sold separately) for assembly.
| For Rod End ID | Opening ID | Ht. | O'all Dia. | Wd. | Material | Temp. Range, °F | Each | |
Protects Against Coolant, Dust, Grease, Oil, Water | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16", 1/4", 5/16", 6 mm, 8 mm | 0.315" | 1.3" | 1.06" | 1.04" | Neoprene Rubber | -40° to 300° | 00000000 | 00000 |
| 3/8", 7/16", 10 mm, 12 mm | 0.394" | 1.54" | 1.32" | 1.28" | Neoprene Rubber | -40° to 300° | 00000000 | 0000 |
| 1/2", 5/8", 3/4", 14 mm, 16 mm, 18 mm | 0.551" | 2" | 1.71" | 1.54" | Neoprene Rubber | -40° to 300° | 00000000 | 0000 |
| 7/8", 1", 20 mm, 22 mm, 25 mm | 0.749" | 2.48" | 2.2" | 1.81" | Neoprene Rubber | -40° to 300° | 00000000 | 00000 |
| Installation Tool | 00000000 | Each | 000000 |
U-Joint Covers
With One Ridge
With Two Ridges
With Three Ridges
Protect U-joints to keep lubricants in and contaminants out. Slide these covers over the joint and use the included cable ties on the cuff ends to secure.
| ID | OD | Lg. | No. of Ridges | Material | Material Thick. | Temp. Range, °F | Each | |
Protects Against Coolant, Dust, Grease, Oil, Water | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.42" | 0.91" | 0.96" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 000000 |
| 0.42" | 0.75" | 0.96" | 2 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.53" | 1.09" | 1.06" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.53" | 0.94" | 1.06" | 2 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.65" | 1.34" | 1.32" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.65" | 1.06" | 1.32" | 2 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.77" | 1.5" | 1.52" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.77" | 1.25" | 1.52" | 3 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.89" | 1.75" | 1.58" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 0.89" | 1.38" | 1.58" | 3 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 1.02" | 2.03" | 1.68" | 1 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 1.02" | 1.5" | 1.68" | 3 | Neoprene Rubber | 0.05" | -30° to 210° | 00000000 | 00000 |
| 1.12" | 2.03" | 1.79" | 1 | Neoprene Rubber | 0.06" | -30° to 210° | 00000000 | 00000 |
| 1.12" | 1.68" | 1.79" | 3 | Neoprene Rubber | 0.06" | -30° to 210° | 00000000 | 00000 |
| 1.36" | 2.56" | 2.14" | 1 | Neoprene Rubber | 0.06" | -30° to 210° | 00000000 | 00000 |
| 1.36" | 1.94" | 2.14" | 3 | Neoprene Rubber | 0.06" | -30° to 210° | 00000000 | 00000 |
| 1.53" | 2.18" | 2.77" | 3 | Neoprene Rubber | 0.08" | -30° to 210° | 00000000 | 00000 |
| 1.77" | 2.59" | 3.08" | 3 | Neoprene Rubber | 0.08" | -30° to 210° | 00000000 | 00000 |
Ball Joint Linkage Covers
Enclose ball joint linkages to keep lubricants in and contaminants out. These covers stretch to fit over joints. Use lubricant and an installation tool (both sold separately) for assembly.
| For Ball Dia. | Opening ID | Ht. | O'all Dia. | Wd. | Material | Temp. Range, °F | Each | |
Protects Against Coolant, Dust, Grease, Oil, Water | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/8", 7/16", 10 mm, 12 mm | 0.394" | 1.54" | 1.32" | 1.28" | Neoprene Rubber | -40° to 300° | 00000000 | 00000 |
| 1/2", 5/8", 3/4", 14 mm, 16 mm, 18 mm | 0.551" | 2" | 1.71" | 1.54" | Neoprene Rubber | -40° to 300° | 00000000 | 0000 |
| Installation Tool | 00000000 | Each | 000000 |