Material Material |
---|
|
Shape Shape |
---|
![]() | Straight |
Type Type | Show |
---|
![]() | Stub End |
Type Type | Hide |
---|
![]() | ![]() |
Connector | Adapter |
![]() | ![]() |
Union | Reducer |
![]() | ![]() |
Pipe | Expansion Joint |
![]() | ![]() |
Reducing Adapter | Bushing |
![]() | ![]() |
Flange | Plug |
![]() | ![]() |
Rotating Joint | Clamp |
![]() | ![]() |
Stub End | Locknut |
![]() | ![]() |
Outlet | Trap |
![]() | ![]() |
Cap | Nut |
![]() | ![]() |
Repair Clamp | Saddle Tap |
For Pipe Material For Pipe Material |
---|
|
System of Measurement System of Measurement |
---|
|
For Use With For Use With |
---|
|
|
Specifications Met Specifications Met |
---|
|
Wall Thickness Wall Thickness |
---|
|
|
|
ID ID |
---|
Connection Type Connection Type |
---|
![]() | Pipe |
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Also known as Schedule 40 fittings, these have thicker walls than our thin-wall stainless steel unthreaded butt-weld fittings. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
Fittings | Flanges | |||||
---|---|---|---|---|---|---|
Pipe Size | Wall Thick. | Construction | Each | Each | ||
304/304L Stainless Steel | ||||||
1/2 | 0.109" | Welded | 000000000 | 000000 | 000000000 | 000000 |
3/4 | 0.113" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 | 0.133" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/4 | 0.14" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/2 | 0.145" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 | 0.154" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 1/2 | 0.203" | Welded | 000000000 | 00000 | 000000000 | 000000 |
3 | 0.216" | Welded | 000000000 | 00000 | 000000000 | 00000 |
4 | 0.237" | Welded | 000000000 | 00000 | 000000000 | 000000 |
6 | 0.28" | Welded | 000000000 | 00000 | 000000000 | 000000 |
8 | 0.322" | Welded | 000000000 | 000000 | 000000000 | 000000 |
316/316L Stainless Steel | ||||||
1/2 | 0.109" | Welded | 000000000 | 00000 | 000000000 | 00000 |
3/4 | 0.113" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 | 0.133" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/4 | 0.14" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/2 | 0.145" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 | 0.154" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 1/2 | 0.203" | Welded | 000000000 | 00000 | 000000000 | 000000 |
3 | 0.216" | Welded | 000000000 | 00000 | 000000000 | 000000 |
4 | 0.237" | Welded | 000000000 | 00000 | 000000000 | 000000 |
6 | 0.28" | Welded | 000000000 | 000000 | 000000000 | 000000 |
8 | 0.322" | Welded | 000000000 | 000000 | 000000000 | 000000 |
Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
Straight Adapters | Flanges | ||||||
---|---|---|---|---|---|---|---|
Pipe Size | Wall Thick. | Flange OD | Construction | Each | Each | ||
304/304L Stainless Steel | |||||||
1/2 | 0.083" | 1 3/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
3/4 | 0.083" | 1 11/16" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 | 0.109" | 2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/4 | 0.109" | 2 1/2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/2 | 0.109" | 2 7/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 | 0.109" | 3 5/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 1/2 | 0.12" | 4 1/8" | Welded | 000000000 | 00000 | 000000000 | 000000 |
3 | 0.12" | 5" | Welded | 000000000 | 00000 | 000000000 | 00000 |
4 | 0.12" | 6 3/16" | Welded | 000000000 | 00000 | 000000000 | 000000 |
6 | 0.134" | 8 1/2" | Welded | 000000000 | 00000 | 000000000 | 000000 |
8 | 0.148" | 10 5/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
10 | 0.134" | 12 3/4" | Welded | 000000000 | 000000 | 000000000 | 000000 |
12 | 0.156" | 15" | Welded | 000000000 | 000000 | 000000000 | 000000 |
316/316L Stainless Steel | |||||||
1/2 | 0.083" | 1 3/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
3/4 | 0.083" | 1 11/16" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 | 0.109" | 2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/4 | 0.109" | 2 1/2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
1 1/2 | 0.109" | 2 7/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 | 0.109" | 3 5/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
2 1/2 | 0.12" | 4 1/8" | Welded | 000000000 | 00000 | 000000000 | 000000 |
3 | 0.12" | 5" | Welded | 000000000 | 00000 | 000000000 | 000000 |
4 | 0.12" | 6 3/16" | Welded | 000000000 | 00000 | 000000000 | 000000 |
6 | 0.134" | 8 1/2" | Welded | 000000000 | 00000 | 000000000 | 000000 |
8 | 0.148" | 10 5/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
10 | 0.134" | 12 3/4" | Welded | 000000000 | 000000 | 000000000 | 000000 |
12 | 0.156" | 15" | Welded | 000000000 | 000000 | 000000000 | 000000 |
Butt-weld fittings allow for a smooth connection that provides maximum flow. They have beveled ends that, when flush to pipe, create a trough for a strong, permanent weld. Fittings are also known as Schedule 40. They are for use in noncorrosive environments.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
Straight Adapters | Flanges | |||||
---|---|---|---|---|---|---|
Pipe Size | Wall Thick. | Construction | Each | Each | ||
1/2 | 0.109" | Seamless | 000000000 | 000000 | 000000000 | 000000 |
3/4 | 0.113" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
1 | 0.133" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
1 1/4 | 0.14" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
1 1/2 | 0.145" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
2 | 0.154" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
2 1/2 | 0.203" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
3 | 0.216" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
4 | 0.237" | Seamless | 000000000 | 00000 | 000000000 | 00000 |
6 | 0.28" | Seamless | 000000000 | 000000 | 000000000 | 00000 |
8 | 0.322" | Seamless | 000000000 | 000000 | 000000000 | 000000 |