The mounting screws on these latches are concealed to prevent tampering.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Designed for use in 1/2" dia. through holes.

Fold the ring handle into the recess to stay out of the way when not in use.

With a finger-grip knob, these latches fit where latches with handles won't.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

The mounting screws on these latches are concealed to prevent tampering.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Press the button and the handle snaps open; push the handle shut for a secure hold.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Designed for use in 1/4" or 1/2" dia. through holes.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

Set a combination and reset it at any time.

Secure these latches with a padlock.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Doors stay closed with the pressure of rollers against the strike plate.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Close and open these grab latches with a push—there's no need for a handle.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Magnetic force holds doors closed.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Keep doors on refrigerators and industrial enclosures closed.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Hold doors, drawers, and hatches closed with the turn of a handle.

Draw lightweight surfaces together with these latches.

Lift and turn the handle 180° to open and close these latches.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

To prevent accidental opening, these latches have a safety catch.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

Each latch comes with a variety of strike plates for different mounting options.

A safety catch prevents accidental opening.

These latches have a safety catch to prevent accidental opening.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Each latch comes with a variety of strike plates for different mounting options.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Turn the padlock eye to fasten these hasps without a padlock.

Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

Each of these cabinet locks opens with its own key.

Choose these locks if you need locks that each open with a different key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.