Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Select the turn direction of the latch when mounting the cam.

Latches with reversible offset cam provide variable latching-distance ranges depending on the cam position.

For technical drawings and 3-D models, click on a part number.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns. Select the turn direction when mounting the cam. Each latch comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several locks that open with the same key. The cam can be mounted to latch at a single point; for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need several locks that open with the same key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

These locks are IP65 rated for protection against dust, dirt, and washdowns. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need locks that each open with a different key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need locks that each open with a different key and also open with a master key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. Two keys are included; master keys are sold separately.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key and also open with a master key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. Two keys are included; master keys are sold separately.

For technical drawings and 3-D models, click on a part number.

These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns. Select the turn direction when mounting the cam. Each latch comes with a straight cam and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets. The handle and latch are each sold separately. Select the turn direction of the latch when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits (sold separately) for multiple-point latching and extra holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Choose these L-handle locks if you need several that open with the same key. Use them for single-point latching, or add latch kits (sold separately) for multiple-point latching to create additional holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Choose this keyed alike lock if you need several that open with the same key. Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. The lock has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the lock when mounting the cam.

For technical drawings and 3-D models, click on a part number.