More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. Also known as lag bolts, they have a hex head for a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from under the head.

For technical drawings and 3-D models, click on a part number.

These steel screws are hot-dipped galvanized to resist corrosion in wet environments and are a good choice for ACQ-treated (arsenic-free) lumber. The flange reduces the risk of crushing material and the hex head provides a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Head height includes the flange. Length is measured from under the head.

For technical drawings and 3-D models, click on a part number.

These 316 stainless steel screws have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. The flange reduces the risk of crushing material and the hex head provides a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Screws may be mildly magnetic. Head height includes the flange. Length is measured from under the head.

For technical drawings and 3-D models, click on a part number.

Drive these into wood with an adjustable wrench, pliers, or a special driver bit (sold separately). Zinc yellow-chromate plating provides corrosion resistance in wet environments and meets ASTM B633 specifications for quality. Dimensions meet ASME B18.2.1 specifications.

For technical drawings and 3-D models, click on a part number.

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.

Black-oxide steel studs are mildly corrosion resistant in dry environments.

Zinc-plated steel studs resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.

For technical drawings and 3-D models, click on a part number.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a screw or threaded rod and tighten. For maximum expansion, the anchor should protrude slightly above the surface before threading the screw. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.