System of Measurement System of Measurement |
---|
|
Screw Size Screw Size | Show |
---|
|
Head Type Head Type |
---|
![]() | Hex |
Material Material |
---|
|
For Use In For Use In |
---|
|
|
Threading Threading |
---|
![]() | Partially Threaded |
![]() | Threaded on Both Ends |
![]() | Fully Threaded |
Minimum Thread Length Minimum Thread Length |
---|
|
|
|
Approximate Threads per Inch ApproximateThreads per Inch |
---|
|
Thread Size Thread Size |
---|
Thread Type Thread Type |
---|
|
Flange Diameter Flange Diameter |
---|
|
Anchor Type Anchor Type |
---|
![]() | Female Threaded |
Hardness Hardness |
---|
|
Pull-Out Strength Pull-Out Strength |
---|
|
More
More
These steel screws have corrosion-resistant finishes. Also known as lag bolts, they have a hex head for a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from under the head.
Black-oxide steel screws have a coating that protects the steel from rusting in dry environments and blends in with dark surfaces.
Zinc-plated steel screws resist corrosion in wet environments.
Hot-dipped galvanized steel screws have a thick coating for better corrosion resistance than zinc-plated steel screws. They're a good choice for ACQ-treated (arsenic-free) lumber.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Oxide Steel | |||||||||
3/8" | |||||||||
1" | 0.563" | 0.25" | 7 | Partially Threaded | 0.667" | ASME B18.2.1 | 10 | 000000000 | 00000 |
1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1 | 10 | 000000000 | 0000 |
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1 | 5 | 000000000 | 0000 |
1 3/4" | 0.563" | 0.25" | 7 | Partially Threaded | 1.167" | ASME B18.2.1 | 5 | 000000000 | 0000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1 | 5 | 000000000 | 0000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1 | 5 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1 | 1 | 000000000 | 0000 |
3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1 | 1 | 000000000 | 0000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1 | 1 | 000000000 | 0000 |
4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1 | 1 | 000000000 | 0000 |
5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1 | 1 | 000000000 | 0000 |
5 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3.25" | ASME B18.2.1 | 1 | 000000000 | 0000 |
6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 1 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||||
3/8" | |||||||||
1" | 0.563" | 0.25" | 7 | Partially Threaded | 0.667" | ASME B18.2.1 | 50 | 000000000 | 0000 |
1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1 | 50 | 000000000 | 0000 |
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1 | 50 | 000000000 | 0000 |
1 3/4" | 0.563" | 0.25" | 7 | Partially Threaded | 1.167" | ASME B18.2.1 | 50 | 000000000 | 00000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1 | 50 | 000000000 | 00000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1 | 25 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1 | 25 | 000000000 | 0000 |
3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1 | 25 | 000000000 | 0000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1 | 25 | 000000000 | 00000 |
4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1 | 25 | 000000000 | 00000 |
5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1 | 25 | 000000000 | 00000 |
6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 10 | 000000000 | 0000 |
7" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 10 | 000000000 | 0000 |
8" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 5 | 000000000 | 0000 |
Black Zinc-Plated Steel | |||||||||
3/8" | |||||||||
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1 | 25 | 000000000 | 0000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1 | 25 | 000000000 | 0000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1 | 10 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1 | 25 | 000000000 | 00000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1 | 10 | 000000000 | 0000 |
Hot-Dipped Galvanized Steel | |||||||||
3/8" | |||||||||
1" | 0.563" | 0.25" | 7 | Partially Threaded | 0.625" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 0000 |
1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 0000 |
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
1 3/4" | 0.563" | 0.25" | 7 | Partially Threaded | 1.167" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 0000 |
5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 0000 |
5 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3.5" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 0000 |
6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 0000 |
7" | 0.563" | 0.25" | 7 | Partially Threaded | 4.667" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
8" | 0.563" | 0.25" | 7 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
9" | 0.563" | 0.25" | 7 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 0000 |
10" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 0000 |
12" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. Also known as lag bolts, they have a hex head for a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
3/8" | |||||||||
1" | 0.563" | 0.25" | 7 | Partially Threaded | 0.667" | ASME B18.2.1 | 10 | 000000000 | 00000 |
1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1 | 10 | 000000000 | 0000 |
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1 | 10 | 000000000 | 0000 |
1 3/4" | 0.563" | 0.25" | 7 | Partially Threaded | 1.167" | ASME B18.2.1 | 10 | 000000000 | 0000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1 | 10 | 000000000 | 0000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1 | 10 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1 | 10 | 000000000 | 0000 |
3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1 | 5 | 000000000 | 0000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1 | 5 | 000000000 | 0000 |
4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1 | 5 | 000000000 | 0000 |
5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1 | 5 | 000000000 | 0000 |
6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 5 | 000000000 | 0000 |
7" | 0.563" | 0.25" | 7 | Partially Threaded | 4.667" | ASME B18.2.1 | 1 | 000000000 | 00000 |
8" | 0.563" | 0.25" | 7 | Partially Threaded | 5.333" | ASME B18.2.1 | 1 | 000000000 | 00000 |
10" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 1 | 000000000 | 0000 |
More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. Also known as lag bolts, they have a hex head for a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||||
3/8" | |||||||||
1" | 0.563" | 0.25" | 7 | Partially Threaded | 0.667" | ASME B18.2.1 | 5 | 000000000 | 00000 |
1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1 | 5 | 000000000 | 0000 |
1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1 | 10 | 000000000 | 00000 |
2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1 | 5 | 000000000 | 0000 |
2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1 | 5 | 000000000 | 0000 |
3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1 | 5 | 000000000 | 00000 |
3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1 | 1 | 000000000 | 0000 |
4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1 | 1 | 000000000 | 0000 |
4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1 | 1 | 000000000 | 0000 |
5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1 | 1 | 000000000 | 0000 |
6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 1 | 000000000 | 0000 |
7" | 0.563" | 0.25" | 7 | Partially Threaded | 4.667" | ASME B18.2.1 | 1 | 000000000 | 00000 |
8" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 1 | 000000000 | 00000 |
10" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1 | 1 | 000000000 | 00000 |
These steel screws are hot-dipped galvanized to resist corrosion in wet environments and are a good choice for ACQ-treated (arsenic-free) lumber. The flange reduces the risk of crushing material and the hex head provides a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Head height includes the flange. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Flange Dia. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
Hot-Dipped Galvanized Steel | ||||||||||
3/8" | ||||||||||
1 1/2" | 0.563" | 0.39" | 0.81" | 7 | Fully Threaded | 0.75" | ASTM A153 | 25 | 000000000 | 000000 |
2" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1" | ASTM A153 | 25 | 000000000 | 00000 |
2 1/2" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1.25" | ASTM A153 | 25 | 000000000 | 00000 |
3" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1.5" | ASTM A153 | 25 | 000000000 | 00000 |
4" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 2" | ASTM A153 | 10 | 000000000 | 0000 |
5" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 3" | ASTM A153 | 5 | 000000000 | 0000 |
6" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 3.5" | ASTM A153 | 5 | 000000000 | 0000 |
These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.
Black-oxide steel studs are mildly corrosion resistant in dry environments.
Zinc-plated steel studs resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
(A) | (B) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Screw Size | Thread Lg. | Thread Size | Thread Lg. | Lg. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Black-Oxide Steel | |||||||||
3/8" | 1 1/2" | 3/8"-16 | 1 1/2" | 3" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
3/8" | 2" | 3/8"-16 | 1 1/2" | 3 1/2" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/8" | 2" | 3/8"-16 | 2" | 4" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 3/8" | 6" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 1/2" | 5" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 2 1/2" | 10" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||||
3/8" | 1 1/2" | 3/8"-16 | 1 1/2" | 3" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
3/8" | 2" | 3/8"-16 | 1 1/2" | 3 1/2" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/8" | 2" | 3/8"-16 | 2" | 4" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 3/8" | 5" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 1/2" | 6" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
3/8" | 3" | 3/8"-16 | 2 1/2" | 10" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 2 1/2" | 12" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.
For technical drawings and 3-D models, click on a part number.
(A) | (B) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Screw Size | Thread Lg. | Thread Size | Thread Lg. | Lg. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
3/8" | 1 1/2" | 3/8"-16 | 1 1/2" | 3" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
3/8" | 2" | 3/8"-16 | 1 1/2" | 3 1/2" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
3/8" | 2" | 3/8"-16 | 2" | 4" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
3/8" | 3" | 3/8"-16 | 1 3/8" | 5" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 1/2" | 6" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
3/8" | 3" | 3/8"-16 | 1 1/2" | 8" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
Also known as dowel screws, use these to join two pieces of wood.
For technical drawings and 3-D models, click on a part number.
Also known as double expansion anchors, these expand from both sides for full contact and a secure hold. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a screw or threaded rod and tighten. For maximum expansion, the anchor should protrude slightly above the surface before threading the screw. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | |||||||||||
3/8"-16 | 2" | 3/4" | 1 3/4" | 3/4" | 500 | 750 | 4,000 psi Concrete | Block, Brick, Concrete | 5 | 000000000 | 000000 |
Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | |||||||||||
3/8"-16 | 1 3/4" | 11/16" | 1 3/4" | 11/16" | 900 | 950 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 10 | 000000000 | 000000 |
For narrow holes and small cavities where toggle anchors won't fit. To install, tap the anchor cone first into a drilled hole. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Sleeve Material | Pull-Out | Shear | Tested In | Specifications Met | For Use In | Pkg. Qty. | Pkg. | |
Steel | ||||||||||||
3/8"-16 | 1 5/16" | 5/8" | 1" | Zinc Alloy | 500 | 620 | 4,000 psi Concrete | FM Approved, UL Listed | Concrete, Hollow Block, Hollow Brick | 5 | 000000000 | 000000 |