Slip these over miniature light bulbs to change the bulb color on small devices such as control panels and indicating lights.

Change the color of a room by slipping these stretchy silicone rubber filters over standard-shaped light bulbs.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Lenses with a PFA-coating (sold separately) are more crack-resistant than glass and tempered-glass lenses.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. They work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Styles 1, 3, and 4 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 2 and 5 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Hang these lights where you need them on the job site.

Style F clips onto surfaces up to 3" thick. It is furnished with a replaceable halogen bulb that casts a warm, yellow-tone light that’s similar in appearance to incandescent bulbs. It has a durable glass lens to protect the bulb, along with a vinyl-coated steel guard to protect the lens.

Styles L, M, and N are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550k33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles L and M have a steel guard to protect the bulb. Style P is compatible with medium-base screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They accommodate a spot or flood bulb.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas.

Style A lights are compatible with medium-base, screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They have a plastic-coated steel guard to protect the bulb.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles A and B lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately). They have a zinc-plated steel guard to protect the bulb.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

These LED lights are rated for environments where hazardous material is present. They have a tempered glass lens to protect the bulb.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

Among the brightest floodlights we offer, these have a height-adjustable stand and swiveling heads to direct the light exactly where it's needed. All are furnished with halogen bulbs and steel guards that protect the glass lenses.

Styles A and B have removeable heads, so you can bring light into areas where the stand won't fit. They cast a cool light that highlights white/blue tones, which is good for inspecting.

Style C has wheels, so you can roll this floodlight into position at your job site. It casts a warm, yellow-toned light that is similar to incandescent light.

For use in dry environments, this easy-to-carry light is small but bright. Adjust the head up and down to flood your job site with light. With a halogen bulb, this floodlight casts a cool light that highlights white/blue tones, which is good for inspecting. It has a steel guard to protect its durable glass lens from accidential contact. This light cannot be sold in California.

A sealed head and switch keeps these lights shining in wet environments. They withstand dripping, splashing, and falling liquid. These lights swing out from the wall and adjust horizontally and vertically to illuminate loading docks and trailers. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.