Length Length |
|---|
Material Material |
|---|
|
Mandrel Material Mandrel Material |
|---|
|
For Minimum Material Thickness For MinimumMaterial Thickness |
|---|
|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
Shear Strength Shear Strength |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Specifications Met Specifications Met |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Finish Finish |
|---|
|
About Installing Blind Rivets
More
Aluminum Large-Diameter Domed Head Blind Rivets
Lightweight and nonmagnetic, these rivets have good corrosion resistance. They have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
Aluminum Mandrel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Dia. | |||||||||||
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 120 | 150 | IFI 114 Standards | 250 | 000000000 | 000000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 120 | 150 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 120 | 150 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 120 | 150 | IFI 114 Standards | 100 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.125"-0.25" | 0.3" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 220 | 350 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 220 | 350 | IFI 114 Standards | 50 | 000000000 | 0000 |
3/16" Dia. | |||||||||||
| 0.02"-0.125" | 0.325" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 260 | 320 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 310 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 310 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 310 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 310 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 310 | 500 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 260 | 320 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 310 | 500 | IFI 114 Standards | 25 | 000000000 | 0000 |
1/4" Dia. | |||||||||||
| 0.063"-0.25" | 0.5" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.376"-0.5" | 0.75" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.501"-0.625" | 0.875" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.626"-0.75" | 1" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.751"-0.875" | 1.125" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.876"-1" | 1.25" | 0.257"-0.261" | F | 0.78" | 0.107" | 600 | 750 | IFI 114 Standards | 10 | 000000000 | 0000 |
Steel Mandrel | |||||||||||
1/8" Dia. | |||||||||||
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 170 | 220 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 170 | 220 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 170 | 220 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 170 | 220 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 170 | 220 | IFI 114 Standards | 250 | 000000000 | 00000 |
5/32" Dia. | |||||||||||
| 0.02"-0.125" | 0.3" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 260 | 350 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.251"-0.375" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 260 | 350 | IFI 114 Standards | 100 | 000000000 | 0000 |
3/16" Dia. | |||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 440 | 720 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 380 | 500 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 1.126"-1.25" | 1.45" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 440 | 720 | IFI 114 Standards | 25 | 000000000 | 0000 |
18-8 Stainless Steel Large-Diameter Domed Head Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 000000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.39" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 25 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.02"-0.125" | 0.3" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.675" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.02"-0.125" | 0.325" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.075" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
Zinc-Plated Steel Large-Diameter Domed Head Blind Rivets
The zinc-plated finish provides mild corrosion resistance. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 260 | 310 | IFI 114 Standards | 100 | 000000000 | 000000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 260 | 310 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.073" | 260 | 310 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 260 | 310 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 260 | 310 | IFI 114 Standards | 50 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 410 | 570 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 410 | 570 | IFI 114 Standards | 50 | 000000000 | 0000 |
3/16" Dia. | |||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 590 | 810 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 590 | 810 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 540 | 680 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 540 | 680 | IFI 114 Standards | 50 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.063"-0.25" | 0.5" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.376"-0.5" | 0.75" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.501"-0.625" | 0.875" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.626"-0.75" | 1" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.751"-0.875" | 1.125" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.876"-1" | 1.25" | 0.257"-0.261" | F | 0.78" | 0.107" | 1,240 | 1,500 | IFI 114 Standards | 10 | 000000000 | 0000 |
Choose-a-Color Large-Diameter Domed Head Blind Rivets
Select a color to make your rivets stand out or blend in. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Specifications Met | Choose a Color | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
| 0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 0000 | |
| 0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 0000 | |
5/32" Dia. | |||||||||||||
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.475" | 0.075" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
| 0.251"-0.375" | 0.549" | 0.16"-0.164" | No. 20 | 0.475" | 0.075" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
3/16" Dia. | |||||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 | |
1/4" Dia. | |||||||||||||
| 0.126"-0.25" | 0.5" | 0.257"-0.261" | F | 0.75" | 0.107" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | 25 | 000000000 | 00000 | |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.75" | 0.107" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | 25 | 000000000 | 00000 | |
Wide-Thickness-Range Large-Diameter Domed Head Blind Rivets
In addition to gripping a much wider range of material thicknesses than standard blind rivets, these have a 50% larger head diameter that distributes pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Specifications Met | Pkg. Qty. | Pkg. | |
Steel Mandrel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Dia. | ||||||||||||
| 0.031"-0.187" | 0.389" | 0.129"-0.133" | No. 30 | 0.33" | 0.05" | 120 | 170 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.118"-0.331" | 0.586" | 0.129"-0.133" | No. 30 | 0.33" | 0.05" | 120 | 170 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 0000 |
5/32" Dia. | ||||||||||||
| 0.047"-0.276" | 0.512" | 0.16"-0.164" | No. 20 | 0.5" | 0.051" | 190 | 350 | 5052 Aluminum | IFI 114 Standards | 100 | 000000000 | 0000 |
3/16" Dia. | ||||||||||||
| 0.039"-0.252" | 0.585" | 0.192"-0.205" | No. 5 | 0.65" | 0.085" | 350 | 500 | 5052 Aluminum | __ | 100 | 000000000 | 00000 |
| 0.063"-0.25" | 0.425" | 0.192"-0.205" | No. 11 | 0.65" | 0.083" | 350 | 500 | 5052 Aluminum | __ | 100 | 000000000 | 00000 |
| 0.197"-0.598" | 0.876" | 0.192"-0.205" | No. 5 | 0.65" | 0.085" | 350 | 500 | 5052 Aluminum | __ | 100 | 000000000 | 00000 |
| 0.236"-0.787" | 1.21" | 0.192"-0.205" | No. 5 | 0.65" | 0.085" | 350 | 500 | 5052 Aluminum | __ | 100 | 000000000 | 00000 |
| 0.251"-0.5" | 0.716" | 0.192"-0.205" | No. 11 | 0.65" | 0.083" | 350 | 500 | 5052 Aluminum | __ | 50 | 000000000 | 00000 |
| 0.5"-0.781" | 0.978" | 0.192"-0.196" | No. 11 | 0.625" | 0.09" | 350 | 500 | 5052 Aluminum | IFI 114 Standards | 50 | 000000000 | 00000 |
Large-Diameter Domed Head High-Strength Blind Rivets
A 50% larger head diameter than standard domed head blind rivets distributes pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. The mandrel expands the rivet body to completely fill the hole, providing the highest shear and tensile strengths of all the blind rivets we offer. The portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Made of aluminum, rivets are lightweight, nonmagnetic, and resist mild corrosion. They join material when you only have access to one side. A low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Mandrel Material | Specifications Met | Pkg. Qty. | Pkg. | |
Aluminum Mandrel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3/16" Dia. | |||||||||||||
| 0.062"-0.27" | 0.415" | 0.191"-0.201" | No. 11 | 0.53" | 0.085" | 550 | 450 | 5052 Aluminum | Aluminum | IFI 134 Standards | 5 | 000000000 | 00000 |
| 0.214"-0.437" | 0.572" | 0.191"-0.201" | No. 11 | 0.53" | 0.085" | 550 | 450 | 5052 Aluminum | Aluminum | IFI 134 Standards | 5 | 000000000 | 0000 |