Slip this laser into your pocket so it's on hand to align belts, pulleys, chain, and sprockets. Economical and simple to use, just press the tool against the side of your pulley or sprocket and project the laser along your belt or chain to the aluminum target (included) to see any misalignment. It has a machined aluminum surface that is adjusted parallel to the contact surface for precise alignment.

Style B lasers have a threaded tip, so they’re compatible with converters.

Twist the head to switch between a dot, a horizontal line, or a vertical line. Project accurate level references onto walls when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

This level projects three dots simultaneously to verify your installation is straight, level, and plumb. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

Whether you’re hanging a drop ceiling or aligning bench tops, use the cross-hair lines of these lasers to install material at the right height. Placed on any surface, they adjust themselves within a few degrees of level.

Red lasers are best viewed indoors because they’re dimmer than green lasers. They come with a tripod to position them up to 46" high.

Green lasers appear up to four times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away. Add a tripod to adjust the height of these lasers between 16" and 51".

Set these lasers on any surface, and they will level themselves within about 4°. The laser projects 360° around the base to show the level line. Whether you're hanging a drop ceiling or aligning bench tops, your installation will be at the right height. Mount them to a tripod (not included) to level at a greater range of heights.

Red lasers are best viewed indoors. They include a laser detector, which indicates the height of the laser’s beam when you can’t see it, such as in bright lighting or at long distances.

Green lasers are four times brighter than red lasers, so you can see the beam outdoors and in bright lighting. They’re also easier to spot from far away. These lasers include a magnetic target, which you can mount at the height you need to reflect the beam, making it brighter and easier to see from a distance.

These kits include a laser, a beam splitter, and a leveling plate. Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. The beam splitter converts one dot into two dots that are set at a 90° angle. Use the leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Mark a dot up to 500 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. These lasers are also known as torpedo levels.

Red lasers are dimmer than green lasers, so they’re best viewed indoors.

Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.

Use a leveling plate for mounting the laser to a tripod, or placing it on a surface. The plate has three adjustable legs to level the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Add a leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Direct laser beams where you need them with components that turn or split your beam. They work with any dot laser.

Mirror requires a holder to mount to a standoff.

90° turning mirror screws into a standoff.

90° beam splitter converts a single dot into two dots; one continues in a straight line, the other projects at a 90° angle. The splitter screws into a standoff.

Dot-to-line converter requires a holder to mount to a standoff.

Standoffs have 8-32 male threads on one end and 1/4"-20 female threads on the other. Diameter is 1/2". For additional lengths, see 18-8 Stainless Steel Standoffs.