To prevent accidental opening, these latches have a safety catch.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

These latches are typically used to secure hoods and covers.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

The latch arm is coated with vinyl so it won't scratch surfaces.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

Each latch comes with a variety of strike plates for different mounting options.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Draw lightweight surfaces together with these latches.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in compression springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Close and open these roller latches with a push—there's no need for a handle.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.

When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.

Keep doors on refrigerators and industrial enclosures closed.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Turn the padlock eye to fasten these hasps without a padlock.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.

Mount these padlockable eyes to the front of a door and door frame.

Choose these hasps if you need hasps that each open with a different key.

Hold doors, drawers, and hatches closed with the turn of a handle.

Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

With a key-locking mechanism, these locks provide more security than other gate locks.

A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Two sets of mounting holes allow mounting on the bottom or side.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.