Use a 5/16" hex key to open and close these locks. They’re good for use on sliding doors. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the lock can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface. These locks require a hex key to open.

Style A lock comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position. It does not have a turning handle.

Style B locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Select the turn direction when mounting the cam. Each lock comes with a straight cam and two reversible offset cams to provide variable latching-distance ranges depending on the cam position.

For technical drawings and 3-D models, click on a part number.

These locks require a hex key to open. They are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Each lock comes with a straight cam and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.