About Padlocks
More
Key-Controlled Resettable Combination Padlocks
The shackle on these padlocks opens with a control key or the combination, which you can set and change at any time. Control keys (sold separately) are required to reset the combination. Made of hardened steel, the shackle is strong and withstands being dropped, tugged, or cut.
Brass-body locks are the most resistant to corrosion but aren’t as strong as zinc-body locks. They have a combination dial on the bottom of the body, so the rolling digits are protected from damage and debris.
Zinc-body locks are stronger than brass-body locks, but they aren't as corrosion resistant. Both ends of the shackle lock inside the body, so they’re harder to break open from prying, shimming, or tapping. They have a combination dial on the side of the body, which makes them easy to grip and open with one hand.
Padlocks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Combination | Control Keys | ||||||||||||
| Style | Vertical Clearance | Horizontal Clearance | Dia. | Ht. | Wd. | Thick. | Manufacturer and Model No. | Type | Location | No. of Possible Combinations | No. of Tumbler Pins | Each | Each | ||
Solid Brass Body | |||||||||||||||
| Standard | 1" | 1" | 5/16" | 1 7/8" | 2" | 15/16" | Master Lock 176KN | Four Numbers | Bottom | 10,000 | 4 | 0000000 | 000000 | 0000000 | 00000 |
Solid Zinc Body | |||||||||||||||
| Dual Locking | 1" | 3/4" | 1/4" | 2" | 1 3/4" | 3/4" | Abus Lock 158/45KC | Four Numbers | Side | 10,000 | 4 | 0000000 | 00000 | 0000000 | 0000 |
Pry-Resistant Key-Controlled Combination Padlocks
Compared to other combination padlocks, these have a reinforced body and dial, making the lock more difficult to shim and pull apart. The dial rim is also recessed to prevent tampering.
Open the shackle with a control key as well as the combination. All of these locks are factory registered to give you an exclusive keying system that is unique to your locks. If matching factory-registered locks to an existing system, please specify the key number of the existing system. Control keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Padlocks | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | |||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | Each | Each | ||
Factory-Registered | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| New | 1" | 15/16" | 5/16" | Hardened Steel | 2 3/16" | 1 1/2" | Master Lock 2010 | Three Numbers | 4 | 00000000 | 000000 | 00000000 | 00000 |
| Existing | 1" | 15/16" | 5/16" | Hardened Steel | 2 3/16" | 1 1/2" | Master Lock 2010 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
Extra-Clearance Key-Controlled Resettable Combination Padlocks
Vertical shackle clearance is greater than 1”. Open shackle one of two ways: With a control key or with the combination, which you can set and change at any time. Control key is sold separately.
For technical drawings and 3-D models, click on a part number.
Padlock | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Key | ||||||||||||
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Manufacturer and Model No. | Combination Type | No. of Possible Combinations | No. of Tumbler Pins | Each | Each | ||
Solid Brass Body | ||||||||||||||
| 2 1/8" | 1" | 5/16" | Hardened Steel | 1 7/8" | 2" | 15/16" | Master Lock 176LH | Four Numbers | 10,000 | 4 | 0000000 | 000000 | 0000000 | 00000 |
Key-Controlled Combination Padlocks
Open the shackle with a control key or the combination. Share the combination to give multiple users access without their own key. Control keys are sold separately. The shackle is hardened steel, which is strong and stands up to being dropped, tugged, or cut.
Factory-registered locks give you an exclusive keying system that is unique to your locks. If you’re matching factory-registered locks to an existing system, specify the key number of the existing system.
Stainless steel lock bodies resist corrosion better than hardened steel lock bodies. Hardened steel lock bodies are strong and hold up better against attempts to force them open than stainless steel lock bodies.
For technical drawings and 3-D models, click on a part number.
Padlocks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | ||||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | No. of Tumbler Discs | Each | Each | ||
Padlocks | ||||||||||||||
Solid Stainless Steel Body | ||||||||||||||
| __ | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | __ | 0000000 | 000000 | 0000000 | 00000 |
Solid Hardened Steel Body | ||||||||||||||
| __ | 3/4" | 13/16" | 9/32" | Hardened Steel | 2" | 1 9/32" | Abus Lock 78KC/50 | Three Numbers | __ | 3 | 00000000 | 00000 | 00000000 | 0000 |
Factory-Registered Padlocks | ||||||||||||||
Solid Stainless Steel Body | ||||||||||||||
| New | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | __ | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | __ | 00000000 | 00000 | 00000000 | 0000 |
Extra-Clearance Key-Controlled Combination Padlocks
Vertical shackle clearance is greater than 1". Open the shackle with a control key as well as the combination. Control keys are sold separately.
Factory-registered locks give you an exclusive keying system that is unique to your locks. If matching factory-registered locks to an existing system, please specify the key number of the existing system.
For technical drawings and 3-D models, click on a part number.
Padlocks | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | |||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | Each | Each | ||
Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| __ | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 0000000 | 000000 | 0000000 | 00000 |
Factory-Registered Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| New | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| New | 2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |