Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Keep doors on refrigerators and industrial enclosures closed.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Push in the knob to open these latches.

The low profile means less of the lock is exposed, reducing the potential for damage.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Designed for use in 1/2" dia. through holes.

Made of plastic, these locks are suitable for damp and humid environments.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Designed for use in 1/2" dia. through holes.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Meet U.S. postal service guidelines for mailbox locks.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

A red indicator on the lock face is visible when unlocked and hidden when locked.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These locks require a hex key to open.

Choose these locks if you need to open several with the same key.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Open these locks with both a master key and their own unique key.

The mounting screws on these locks are concealed to prevent tampering.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

A master key opens all of these locks, which also have their own unique keys.

Open each of these locks with a different key.

Press the button and the handle snaps open; push the handle shut for a secure hold.

With a molded inset grip, the handle remains recessed to stay out of the way.

Designed for use in 1/2" dia. through holes.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

The mounting screws on these latches are concealed to prevent tampering.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Fold the ring handle into the recess to stay out of the way when not in use.

With a flat inset grip, the handle is recessed to stay out of the way.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

Press the button and the handle snaps open; push the handle shut for a secure hold.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Secure these latches with a padlock.

Bolts are spring-loaded to stay latched until you activate the pull.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to secure.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Choose these locks if you need locks that each open with a different key.

The mounting screws on these padlockable latches are concealed to prevent tampering.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

Choose these locks if you need locks that each open with a different key.

Each of these cabinet locks opens with its own key.

Open multiple cabinet locks with the same key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Open multiple cabinet locks with their own keys, as well as with a master key.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Open each of these drawer locks with a different key.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Choose these locks if you need several that open with the same key.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

Choose these L-handle locks if you need several that open with the same key.

Choose these keyed alike locks if you need several that open with the same key.