This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Unlike paint that must be diluted, this paint comes ready for use with an air brush.

Make a magnetic writing surface for your workspace.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.

Mark traffic lanes, parking lots, and factory floors.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.

Prepare foam pipe insulation for use outdoors. These coatings provide a clean, moisture-resistant finish that protects insulation from UV and ozone damage.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. Once removed, coatings can be melted again for repeat use.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.

Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.

Mix these additives with any water-based paint to limit the spread of flames and generation of smoke when they’re used on interior surfaces, such as drywall and wood.

Mix with water to clear all traces of silicone from molds and molded parts.

Use this thick gel to remove rust from vertical surfaces. Removers are acid free and are safe for contact with skin and sensitive surfaces, such as copper, brass, aluminum, and plastic.

These acid-free rust removers are safe for contact with people and surfaces.