Machine circular grooves onto the end of a workpiece.

Also known as parting blades, use these to separate a finished part from the workpiece.

Cut small grooves inside a workpiece for insertion and removal of O-rings.

Machine grooves in plastic and most metal with these high-speed steel tools.

An extra-long shank provides additional reach.

These are the smallest boring tools we offer.

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

When cutting threads in nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic, diamond tips provide superior cutting performance.

A carbide tip brazed onto a ground steel shank makes these tools less brittle than solid carbide tools.

Contour the interior wall of a hollow workpiece.

Use these tools to enlarge existing holes to precise diameters.

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Secure square-shank tools to a lathe.

Use these carbide inserts for general purpose turning.

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Heat resistant and wear resistant, these inserts cut super alloys—such as Inconel and Waspaloy—and titanium better than general use inserts.

Heat resistant and shaped for turning stainless steel specifically, these inserts will last longer than inserts for multiple materials.

Replace clamps, screws, seats, and slotted pins in carbide insert holders.

Resisting wear and fractures when cutting hardened steel, these cubic boron nitride inserts last longer than carbide inserts.

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Pair these holders with a tool block for right- and left-hand mounting in a lathe.

Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block.

The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges.

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.

Pair these holders with a threading insert or a grooving insert to make cuts on the outside of a workpiece.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Deliver coolant through the holder to keep workpieces cool while boring tough materials, such as steel, stainless steel, and nickel-based alloys.

Pair one of these inserts with a compatible boring carbide insert holder with coolant hole.

Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece.

Consistently position workpieces in a three-jaw lathe chuck by installing a chuck stop. These stops enable short workpieces to extend beyond the chuck's jaws, providing additional clearance.

When hand pressure is released, these wrenches automatically pop out of lathe chucks to keep users and machines safe from harm. Use them to prevent accidents that can occur when someone forgets to remove their wrench before turning on a lathe.

Hold machinable lathe chuck jaws in place during machining to make accurate cuts, ensuring the jaws will securely grip your workpiece.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

Made from hardened steel, these jaws have a long service life even when performing heavy machining such as roughing cuts.

The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.

The sleeve on these mandrels expands to hold a range of diameters for better versatility than solid and expanding-end mandrels.

These light duty centers are for intermittent use on manual lathes.

Also known as bull-nose centers, these have a wide head to hold pipe and large-diameter tubing.

Attach these tools to a manual lathe.

Create a knurled pattern on the end of a workpiece.

Work faster by using two knurls at the same time.

Block chips while maintaining an unobstructed view of the workpiece.

Two slide-in dovetail mounts on the tool posts allow you to quickly change from one tool holder to another.

Grip square-shank lathe tools.

A built-in drill chuck allows quick installation of drill bits, taps, and other round- or hex-shank tools into a quick-change tool post.

Mount any tool with a Morse taper shank to a quick-change tool post.

These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck. Choose from collets that can grip round-, hexagon-, or square-shaped workpieces.

Use these collets in milling machines that have an ER-25 collet chuck. With a round face and adjustable body, they compress to grip round-shank drill bits, end mills, reamers, and taps.

Insert into a 16C collet chuck or holder to tightly grip round workpieces. They provide a stronger hold on small workpieces than a standard lathe chuck.

Install into an ER-32 collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Save time when switching to a new workpiece by changing out the head instead of the entire collet.

When installed into a 3J collet chuck or holder, these collets securely grip workpieces.

Also known as step collets.