About Structural Adhesives
More
Acrylic Structural Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8005 contains 0.008" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
DP8010 is moisture and corrosion resistant.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
| DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,275 | 9 | 10:1 | Thick Liquid (24,550 cP) | -65° to 200° | Black | Plastic | 00000000 | 000000 |
| DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,500 | 17 | 10:1 | Thick Liquid (25,460 cP) | -65° to 200° | Off-White | Plastic | 00000000 | 00000 |
| DP8010 | 1.52 | Cartridge | 10 min. | 24 hrs. | 2,700 | Not Rated | 10:1 | Thick Liquid (20,000 cP) | -40° to 200° | Blue | Plastic | 0000000 | 00000 |
Acrylic Structural Adhesives
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Adhesives with Mixer Nozzle | ||||||||||||
| 1.69 | Cartridge | 5 min. | 24 hrs. | 3,200 | 7 | 1:1 | Thick Liquid (64,000 cP) | -40° to 250° | Light Green | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry | 000000 | 000000 |
| 13.5 | Cartridge | 5 min. | 24 hrs. | 3,200 | 7 | 1:1 | Thick Liquid (64,000 cP) | -40° to 250° | Light Green | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry | 000000 | 00000 |
Glue-on-a-Roll
Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.
9482PC and 9485PC are a good choice for precise applications, even on slippery plastics. They're reinforced with fiber so they keep their shape and don’t ooze out, unlike softer adhesives.
| Mfr. Model No. | Wd. | Lg., yd. | Thick. | Temp. Range, °F | Color | For Joining | Each | |
3M Glue | ||||||||
|---|---|---|---|---|---|---|---|---|
| 9482PC | 1/2" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 000000 |
| 9482PC | 3/4" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
| 9482PC | 1" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
| 9485PC | 1/2" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
| 9485PC | 3/4" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
| 9485PC | 1" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |