Travel Length Travel Length |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
Overall Length Overall Length |
|---|
Overall Width Overall Width |
|---|
Handle Type Handle Type |
|---|
|
Carriage Width Carriage Width |
|---|
Bearing Material Bearing Material |
|---|
|
Carriage Length Carriage Length |
|---|
Lubrication Lubrication |
|---|
|
For Mounting Fastener Thread Size For MountingFastener Thread Size |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
Lead Screw Material Lead Screw Material |
|---|
|
Positioning Slides
Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring. Their Rulon sleeve bearings allow smooth movement in dirty environments.
Travel distance per turn, also known as screw lead, is the distance the carriage moves with one revolution of the handle.
Note: Capacities listed are for horizontal mounting. When mounted vertically, the load capacity is cut in half.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Handle | Carriage Mounting | Base Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Travel Lg. | Travel Distance per Turn | Accuracy for Travel Distance per Turn | Ht. | Wd. | Lg. | Wd. | Lg. | Type | Dia. | Overhang | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||||
15 lbs. Static Load Capacity | ||||||||||||||||||
| 1.5" | 0.05" | 0.0007" per in. | 0.56" | 1.5" | 4.16" | 0.62" | 1.5" | Dial | 0.61" | __ | 180° | 4 | 6-32 | 2 | 8-32 | No | 0000000 | 0000000 |
| 4.5" | 0.05" | 0.0007" per in. | 0.56" | 1.5" | 7.16" | 0.62" | 1.5" | Dial | 0.61" | __ | 180° | 4 | 6-32 | 2 | 8-32 | No | 0000000 | 000000 |
| 7.5" | 0.05" | 0.0007" per in. | 0.56" | 1.5" | 10.16" | 0.62" | 1.5" | Dial | 0.61" | __ | 180° | 4 | 6-32 | 3 | 8-32 | No | 0000000 | 000000 |
| 10.5" | 0.05" | 0.0007" per in. | 0.56" | 1.5" | 13.16" | 0.62" | 1.5" | Dial | 0.61" | __ | 180° | 4 | 6-32 | 4 | 8-32 | No | 0000000 | 000000 |
30 lbs. Static Load Capacity | ||||||||||||||||||
| 1.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 6.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 2 | 10-32 | No | 0000000 | 000000 |
| 3.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 8.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 2 | 10-32 | No | 0000000 | 000000 |
| 6.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 11.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 3 | 10-32 | No | 0000000 | 000000 |
| 9.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 14.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 4 | 10-32 | No | 0000000 | 000000 |
| 12.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 17.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 5 | 10-32 | No | 0000000 | 000000 |
| 15.5" | 0.05" | 0.0007" per in. | 0.81" | 2.5" | 20.72" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 180° | 4 | 8-32 | 6 | 10-32 | No | 0000000 | 000000 |
100 lbs. Static Load Capacity | ||||||||||||||||||
| 2" | 0.1" | 0.0007" per in. | 1.06" | 4" | 8.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 000000 |
| 5" | 0.1" | 0.0007" per in. | 1.06" | 4" | 11.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 3 | 1/4"-20 | No | 0000000 | 000000 |
| 8" | 0.1" | 0.0007" per in. | 1.06" | 4" | 14.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 4 | 1/4"-20 | No | 0000000 | 000000 |
| 11" | 0.1" | 0.0007" per in. | 1.06" | 4" | 17.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 5 | 1/4"-20 | No | 0000000 | 000000 |
| 14" | 0.1" | 0.0007" per in. | 1.06" | 4" | 20.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 6 | 1/4"-20 | No | 0000000 | 000000 |
| 17" | 0.1" | 0.0007" per in. | 1.06" | 4" | 23.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 7 | 1/4"-20 | No | 0000000 | 000000 |
| 20" | 0.1" | 0.0007" per in. | 1.06" | 4" | 26.73" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 180° | 4 | 10-32 | 8 | 1/4"-20 | No | 0000000 | 000000 |
Precision Positioning Slides
A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001". Rulon sleeve bearings allow these slides to move smoothly, even in dirty environments. Use them in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.
Travel distance per turn, also known as screw lead, is the distance the carriage moves with one revolution of the handle.
Note: Capacities listed are for horizontal mounting. When mounted vertically, the load capacity is cut in half.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Handle | Carriage Mounting | Base Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Travel Lg. | Travel Distance per Turn | Accuracy for Travel Distance per Turn | Ht. | Wd. | Lg. | Wd. | Lg. | Type | Dia. | Overhang | Linear Scale Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | |||||||||||||||||||
15 lbs. Static Load Capacity | |||||||||||||||||||
| 1.5" | 0.05" | 0.00015" per in. | 0.61" | 1.5" | 5.6" | 0.62" | 1.5" | Hand Wheel | 1.75" | 0.59" | 0.025" | 180° | 4 | 6-32 | 2 | 8-32 | No | 0000000 | 0000000 |
| 4.5" | 0.05" | 0.00015" per in. | 0.56" | 1.5" | 8.6" | 0.62" | 1.5" | Hand Wheel | 1.75" | 0.59" | 0.025" | 180° | 4 | 6-32 | 2 | 8-32 | No | 0000000 | 000000 |
| 7.5" | 0.05" | 0.00015" per in. | 0.61" | 1.5" | 11.6" | 0.62" | 1.5" | Hand Wheel | 1.75" | 0.59" | 0.025" | 180° | 4 | 6-32 | 3 | 8-32 | No | 0000000 | 000000 |
| 10.5" | 0.05" | 0.00015" per in. | 0.61" | 1.5" | 14.6" | 0.62" | 1.5" | Hand Wheel | 1.75" | 0.59" | 0.025" | 180° | 4 | 6-32 | 4 | 8-32 | No | 0000000 | 000000 |
30 lbs. Static Load Capacity | |||||||||||||||||||
| 1.5" | 0.05" | 0.00015" per in. | 0.81" | 2.5" | 6.74" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 0.025" | 180° | 4 | 8-32 | 2 | 10-32 | No | 0000000 | 000000 |
| 3.5" | 0.05" | 0.00015" per in. | 0.81" | 2.5" | 8.74" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 0.025" | 180° | 4 | 8-32 | 2 | 10-32 | No | 0000000 | 000000 |
| 6.5" | 0.05" | 0.00015" per in. | 0.81" | 2.5" | 11.74" | 1.25" | 2.5" | Hand Wheel | 1.75" | 0.44" | 0.025" | 180° | 4 | 8-32 | 3 | 10-32 | No | 0000000 | 000000 |
100 lbs. Static Load Capacity | |||||||||||||||||||
| 2" | 0.1" | 0.00015" per in. | 1.06" | 4" | 9.41" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 0.025" | 180° | 4 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 000000 |
| 5" | 0.1" | 0.00015" per in. | 1.06" | 4" | 12.41" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 0.025" | 180° | 4 | 10-32 | 3 | 1/4"-20 | No | 0000000 | 000000 |
| 8" | 0.1" | 0.00015" per in. | 1.06" | 4" | 15.41" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 0.025" | 180° | 4 | 10-32 | 4 | 1/4"-20 | No | 0000000 | 00000000 |
| 11" | 0.1" | 0.00015" per in. | 1.06" | 4" | 18.41" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 0.025" | 180° | 4 | 10-32 | 5 | 1/4"-20 | No | 0000000 | 00000000 |
| 14" | 0.1" | 0.00015" per in. | 1.06" | 4" | 21.41" | 2.35" | 4" | Hand Wheel | 1.75" | 0.24" | 0.025" | 180° | 4 | 10-32 | 6 | 1/4"-20 | No | 0000000 | 00000000 |
High-Load Positioning Slides
Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides. They have a precision lead screw for use in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drililng, fastening, assembly, and measuring.
Travel distance per turn, also known as screw lead, is the distance the carriage moves with one revolution of the handle.
Two-axis mounting plates (sold separately) let you mount two slides together for motion along two axes.
For technical drawings and 3-D models, click on a part number.
Positioning Slides | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all, mm | Carriage, mm | Handle | Carriage Mounting | Base Mounting | Mounting Plates | ||||||||||||||
| Travel Lg. | Travel Distance per Turn | Accuracy for Travel Distance per Turn | Ht., mm | Wd. | Lg. | Wd. | Lg. | Type | Handle Dia., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | Each | ||
Aluminum Carriage and Base | |||||||||||||||||||
490 lbs. Static Load Capacity | |||||||||||||||||||
| 4.35" | 0.05" | 0.0006" per in. | 16 | 46 | 188.4 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 4 | M3 | No | 0000000 | 0000000 | 0000000 | 000000 |
| 10.35" | 0.05" | 0.0006" per in. | 16 | 46 | 336.6 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 8 | M3 | No | 0000000 | 000000 | 0000000 | 00000 |
| 16.35" | 0.05" | 0.0006" per in. | 16 | 46 | 489 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 12 | M3 | No | 0000000 | 000000 | 0000000 | 00000 |
800 lbs. Static Load Capacity | |||||||||||||||||||
| 3.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 187.9 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 3 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
| 9.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 340.2 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 5 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
| 15.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 492.6 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 8 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
Motor-Mount Positioning Slides
Connect to an electric motor with the included NEMA mounting flange. Slides have a precision lead screw, ball bearing carriage, and shaft coupling already installed.
Black-anodized finish slides are good for projects where aesthetics matter, such as prototyping. Their lead screw is PTFE coated to minimize friction for accurate movement and longer life. Use slides with photoelectric proximity sensors with plastic and paper. Slides with inductive proximity sensors are durable in oily environments, so they’re good to use with metal.
Travel distance per turn, also known as screw lead, is the distance a load moves with one revolution of the lead screw.
Note: Capacities listed are for horizontal mounting. When mounted vertically, the load capacity is cut in half.
For technical drawings and 3-D models, click on a part number.
O'all, mm | Carriage, mm | Motor Adapter, mm | Carriage Mounting | Base Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sensor Type | Travel Lg., mm | Dynamic Load Cap., lbs. | Ht., mm | Wd. | Lg. | Wd. | Lg. | Wd. | Ht. | Overhang | For Shaft Dia. | Max. Speed | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Travel Distance per Turn | Each | |
Aluminum Carriage and Base—For NEMA 17 Motor Frame | |||||||||||||||||||||
303 Stainless Steel Lead Screw | |||||||||||||||||||||
| __ | 100 | 30 | 33 | 60 | 250 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 4 | M5 | No | 0.125" | 0000000 | 000000000 |
| __ | 100 | 30 | 33 | 60 | 250 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 4 | M5 | No | 0.5" | 0000000 | 00000000 |
| __ | 200 | 30 | 33 | 60 | 350 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 6 | M5 | No | 0.125" | 0000000 | 00000000 |
| __ | 200 | 30 | 33 | 60 | 350 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 6 | M5 | No | 0.5" | 0000000 | 00000000 |
| __ | 300 | 30 | 33 | 60 | 450 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 8 | M5 | No | 0.125" | 0000000 | 00000000 |
| __ | 300 | 30 | 33 | 60 | 450 | 60 | 60 | 40 | 40 | __ | 0.2" | 2,000 rpm | 180° | 4 | M5 | 8 | M5 | No | 0.5" | 0000000 | 00000000 |
Aluminum Carriage and Base—For NEMA 23 Motor Frame | |||||||||||||||||||||
303 Stainless Steel Lead Screw | |||||||||||||||||||||
| __ | 100 | 30 | 33 | 60 | 256 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 4 | M5 | No | 0.125" | 0000000 | 00000000 |
| __ | 100 | 30 | 33 | 60 | 256 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 4 | M5 | No | 0.5" | 0000000 | 00000000 |
| __ | 200 | 30 | 33 | 60 | 356 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 6 | M5 | No | 0.125" | 0000000 | 00000000 |
| __ | 200 | 30 | 33 | 60 | 356 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 6 | M5 | No | 0.5" | 0000000 | 00000000 |
| __ | 300 | 30 | 33 | 60 | 456 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 8 | M5 | No | 0.125" | 0000000 | 00000000 |
| __ | 300 | 30 | 33 | 60 | 456 | 60 | 60 | 57 | 57 | 8 | 0.25" | 2,000 rpm | 180° | 4 | M5 | 8 | M5 | No | 0.5" | 0000000 | 00000000 |
Black-Anodized Aluminum Carriage and Base—For NEMA 11 Motor Frame | |||||||||||||||||||||
PTFE-Coated 303 Stainless Steel Lead Screw | |||||||||||||||||||||
| Photoelectric, Proximity | 25 | 30 | 22 | 50 | 101 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 4 | M3 | No | 1mm | 00000000 | 000000 |
| Photoelectric, Proximity | 50 | 30 | 22 | 50 | 126 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 6 | M3 | No | 1mm | 00000000 | 000000 |
| Photoelectric, Proximity | 100 | 30 | 22 | 50 | 176 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 10 | M3 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 25 | 30 | 22 | 50 | 101 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 4 | M3 | No | 1mm | 00000000 | 000000 |
| Inductive, Proximity | 50 | 30 | 22 | 50 | 126 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 6 | M3 | No | 1mm | 00000000 | 000000 |
| Inductive, Proximity | 100 | 30 | 22 | 50 | 176 | 39 | 33 | 28 | 28 | 3 | 5mm | 100 mm/s | 180° | 4 | M3 | 10 | M3 | No | 1mm | 00000000 | 00000000 |
Black-Anodized Aluminum Carriage and Base—For NEMA 17 Motor Frame | |||||||||||||||||||||
PTFE-Coated 303 Stainless Steel Lead Screw | |||||||||||||||||||||
| Photoelectric, Proximity | 70 | 60 | 34 | 80 | 197 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 4 | M4 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 120 | 60 | 34 | 80 | 247 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 6 | M4 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 220 | 60 | 34 | 80 | 347 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 8 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 70 | 60 | 34 | 80 | 197 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 4 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 120 | 60 | 34 | 80 | 247 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 6 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 220 | 60 | 34 | 80 | 347 | 62 | 64 | 42 | 42 | 3 | 5mm | 100 mm/s | 180° | 4 | M4 | 8 | M4 | No | 1mm | 00000000 | 00000000 |
Black-Anodized Aluminum Carriage and Base—For NEMA 23 Motor Frame | |||||||||||||||||||||
PTFE-Coated 303 Stainless Steel Lead Screw | |||||||||||||||||||||
| Photoelectric, Proximity | 110 | 90 | 44 | 90 | 272 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 4 | M5 | No | 5mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 210 | 90 | 44 | 90 | 372 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 6 | M5 | No | 5mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 410 | 90 | 44 | 90 | 572 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 10 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 110 | 90 | 44 | 90 | 272 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 4 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 210 | 90 | 44 | 90 | 372 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 6 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 410 | 90 | 44 | 90 | 572 | 70 | 82 | 56 | 56 | 7 | 0.25" | 100 mm/s | 180° | 4 | M5 | 10 | M5 | No | 5mm | 00000000 | 00000000 |
Black-Anodized Aluminum Carriage and Base | |||||||||||||||||||||
PTFE-Coated 303 Stainless Steel Lead Screw | |||||||||||||||||||||
| Photoelectric, Proximity | 25 | 30 | 22 | 50 | 102 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 4 | M3 | No | 1mm | 00000000 | 000000 |
| Photoelectric, Proximity | 50 | 30 | 22 | 50 | 127 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 6 | M3 | No | 1mm | 00000000 | 000000 |
| Photoelectric, Proximity | 70 | 60 | 34 | 80 | 202 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 4 | M4 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 100 | 30 | 22 | 50 | 177 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 10 | M3 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 110 | 90 | 44 | 90 | 277 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 4 | M5 | No | 5mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 120 | 60 | 34 | 80 | 252 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 6 | M4 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 210 | 90 | 44 | 90 | 377 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 6 | M5 | No | 5mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 220 | 60 | 34 | 80 | 352 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 8 | M4 | No | 1mm | 00000000 | 00000000 |
| Photoelectric, Proximity | 410 | 90 | 44 | 90 | 577 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 10 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 25 | 30 | 22 | 50 | 102 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 4 | M3 | No | 1mm | 00000000 | 000000 |
| Inductive, Proximity | 50 | 30 | 22 | 50 | 127 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 6 | M3 | No | 1mm | 00000000 | 000000 |
| Inductive, Proximity | 70 | 60 | 34 | 80 | 202 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 4 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 100 | 30 | 22 | 50 | 177 | 39 | 33 | 25 | 25 | 2 | 5mm | 100 mm/s | 180° | 4 | M3 | 10 | M3 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 110 | 90 | 44 | 90 | 277 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 4 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 120 | 60 | 34 | 80 | 252 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 6 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 210 | 90 | 44 | 90 | 377 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 6 | M5 | No | 5mm | 00000000 | 00000000 |
| Inductive, Proximity | 220 | 60 | 34 | 80 | 352 | 62 | 64 | 42 | 42 | 3 | 6mm | 100 mm/s | 180° | 4 | M4 | 8 | M4 | No | 1mm | 00000000 | 00000000 |
| Inductive, Proximity | 410 | 90 | 44 | 90 | 577 | 70 | 82 | 60 | 60 | 9 | 8mm | 100 mm/s | 180° | 4 | M5 | 10 | M5 | No | 5mm | 00000000 | 00000000 |
Locking Positioning Tables with Micrometer
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 5 | 6mm | 25mm | 57.9mm | 13.5mm | 19.1mm | 19.1mm | 10mm | 0.01mm | 180° | 8 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 6 | 0.5" | 1.63" | 3.34" | 0.5" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 000000 |
| 25 | 0.5" | 2.13" | 4.47" | 0.75" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 3" | 6.94" | 1" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 000000 |
Positioning Tables with Micrometer
The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 0.5" | 1.25" | 3.36" | 0.38" | 1.25" | 1.25" | 0.41" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 00000000 | 0000000 |
| 12 | 0.5" | 1.5" | 3.55" | 0.62" | 1.5" | 1.5" | 0.41" | 0.001" | 180° | 4 | 4-40 | 2 | 4-40 | No | 00000000 | 000000 |
| 20 | 0.5" | 1.75" | 4.08" | 0.75" | 1.75" | 1.75" | 0.52" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 20 | 1" | 1.75" | 6" | 0.75" | 1.75" | 1.75" | 0.7" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 30 | 2" | 4.12" | 10.98" | 0.91" | 4.12" | 4.12" | 0.83" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 60 | 1" | 2.62" | 6.88" | 1" | 2.62" | 2.62" | 0.7" | 0.001" | 180° | 8 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 100 | 1" | 5" | 9.31" | 1" | 5" | 5" | 0.7" | 0.001" | 155° | 12 | 1/4"-20 | 2 | 1/4"-20 | No | 0000000 | 000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 13 | 31.8 | 82.6 | 9.7 | 31.8 | 31.8 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 4 | 13 | 44.5 | 95.3 | 9.7 | 44.5 | 44.5 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 00000000 | 000000 |
| 12 | 13 | 38.1 | 88.9 | 15.7 | 38.1 | 38.1 | 10.4 | 0.01 | 180° | 4 | M3 | 2 | M3 | No | 00000000 | 000000 |
| 20 | 13 | 44.5 | 111.3 | 19.1 | 44.5 | 44.5 | 13.2 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 00000000 | 000000 |
| 20 | 25 | 44.5 | 149.4 | 19.1 | 44.5 | 44.5 | 17.8 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 00000000 | 000000 |
| 30 | 50 | 104.6 | 260.4 | 23.1 | 104.6 | 104.6 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 30 | 50 | 130.2 | 285.8 | 23.1 | 130.2 | 130.2 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 60 | 13 | 66.5 | 133.4 | 25.4 | 66.5 | 66.5 | 13.2 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 60 | 25 | 66.5 | 171.5 | 25.4 | 66.5 | 66.5 | 17.8 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 00000000 | 000000 |
Three-Axis Positioning Tables with Micrometers
The micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 1 | 0.5" | 3.25" | 3.63" | 3.87" | 1.25" | 1.25" | 0.42" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 0000000 | 0000000 |
| 20 | 0.5" | 4.62" | 5.74" | 5.12" | 1.75" | 2" | 0.54" | 0.001" | 180° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 30 | 1" | 7.25" | 7.25" | 9.83" | 3.12" | 3.12" | 0.71" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 0000000 | 00000000 |
| 30 | 2" | 10.25" | 10.25" | 13.33" | 4.12" | 4.12" | 0.62" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 0000000 | 00000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | |||||||||||||||||
| 1 | 13 | 82.6 | 92.3 | 98.3 | 31.8 | 31.8 | 10.7 | 0.01 | 180° | 10 | M2 | 0.4 | 4 | M2 | No | 00000000 | 0000000 |
| 20 | 13 | 117.3 | 145.7 | 130 | 44.5 | 50.8 | 13.6 | 0.01 | 180° | 8 | M4 | 0.7 | 2 | M4 | No | 00000000 | 000000 |
| 30 | 25 | 184.2 | 184.2 | 249.7 | 79.2 | 79.2 | 18 | 0.01 | 180° | 10 | M5 | 0.8 | 2 | M5 | No | 00000000 | 00000000 |
| 30 | 50 | 260.4 | 260.4 | 338.6 | 104.6 | 104.6 | 15.8 | 0.01 | 180° | 10 | M5 | 0.8 | 2 | M5 | No | 00000000 | 00000000 |
Locking Two-Axis Positioning Tables with Micrometers
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 5 | 6mm | 57.9mm | 57.9mm | 26.9mm | 19.1mm | 19.1mm | 1mm | 0.01mm | 180° | 8 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 6 | 0.5" | 3.72" | 3.34" | 1" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 000000 |
| 25 | 0.5" | 4.85" | 4.47" | 1.5" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 7.32" | 6.94" | 2" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 00000000 |
Two-Axis Positioning Tables with Micrometers
The micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 0.5" | 3.36" | 3.36" | 0.75" | 1.25" | 1.25" | 0.41" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 00000000 | 0000000 |
| 12 | 0.5" | 3.55" | 3.55" | 1.25" | 1.5" | 1.5" | 0.41" | 0.001" | 180° | 4 | 4-40 | 2 | 4-40 | No | 00000000 | 000000 |
| 20 | 0.5" | 4.08" | 4.08" | 1.5" | 1.75" | 1.75" | 0.52" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 20 | 1" | 6" | 6" | 1.5" | 1.75" | 1.75" | 0.7" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 30 | 2" | 10.56" | 10.56" | 1.82" | 4.12" | 4.12" | 0.7" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 60 | 1" | 6.88" | 6.88" | 2" | 2.62" | 2.62" | 0.7" | 0.001" | 180° | 8 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 100 | 1" | 9.31" | 9.31" | 2" | 5" | 5" | 0.7" | 0.001" | 155° | 12 | 1/4"-20 | 2 | 1/4"-20 | No | 0000000 | 00000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 13 | 82.6 | 82.6 | 19 | 31.8 | 31.8 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 000000000 | 0000000 |
| 4 | 13 | 96.3 | 95.3 | 19 | 44.5 | 44.5 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 000000000 | 000000 |
| 12 | 13 | 88.9 | 88.9 | 31.8 | 38.1 | 38.1 | 10.4 | 0.01 | 180° | 4 | M3 | 2 | M3 | No | 000000000 | 000000 |
| 20 | 13 | 111.3 | 111.3 | 38.1 | 44.5 | 44.5 | 13.2 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 000000000 | 000000 |
| 20 | 25 | 149.4 | 149.4 | 38.1 | 44.5 | 44.5 | 17.8 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 000000000 | 000000 |
| 30 | 50 | 260.4 | 260.4 | 46.2 | 104.6 | 104.6 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 30 | 50 | 285.8 | 285.8 | 46.2 | 130.2 | 130.2 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 60 | 13 | 133.4 | 133.4 | 50.8 | 66.5 | 66.5 | 13.2 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 60 | 25 | 171.5 | 171.5 | 50.8 | 66.5 | 66.5 | 17.8 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 000000000 | 000000 |
Positioning Slides for Universal Robots
 Shown with Robot Arm (Not Included) |  |
 |
Extend the horizontal reach of your Universal Robots arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC. All of these slides have a carriage, slide controller, and software plug-in for connecting, operating, and programming your robot’s arm. The slides become an extension of the arm, so you can program how they glide back and forth on the rail as part of the robot's work cycle. A cable management system keeps your cables from tangling while the slides are in motion.
These bases are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair these slides with Telescoping Bases for Universal Robots to also extend the vertical reach of your robot’s arm.
For technical drawings and 3-D models, click on a part number.
Overall | Carriage | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | Accessory Mount. Location | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Travel Lg. | Lg. | Wd. | Data Connection | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e Series | |||||||||||||||||
Aluminum | |||||||||||||||||
| 49" | 6" | 4" | 27 1/2" | 6 5/8" | 7 7/8" | RS485 | 4,700 | 4,700 | 1/4" (4) | Yes | 1/4" (10) | No | 1/4" (8) | Yes | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 0000000000 |
| 61" | 6" | 4" | 39 3/8" | 6 5/8" | 7 7/8" | RS485 | 4,700 | 4,700 | 1/4" (4) | Yes | 1/4" (10) | No | 1/4" (8) | Yes | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 73" | 6" | 4" | 51 1/8" | 6 5/8" | 7 7/8" | RS485 | 4,700 | 4,700 | 1/4" (4) | Yes | 1/4" (10) | No | 1/4" (8) | Yes | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 85" | 6" | 4" | 63" | 6 5/8" | 7 7/8" | RS485 | 4,700 | 4,700 | 1/4" (4) | Yes | 1/4" (10) | No | 1/4" (8) | Yes | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 92" | 6" | 4" | 70 7/8" | 6 5/8" | 7 7/8" | RS485 | 4,700 | 4,700 | 1/4" (4) | Yes | 1/4" (10) | No | 1/4" (8) | Yes | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |