These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

The smooth stainless steel surface allows for easy cleaning.

Attach these tiny flashlights to a grease gun nozzle or air hose to shine light directly onto your work.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.

All of these flashlights stand up to wet environments.

Rated for use in environments where hazardous material is present.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They're rated for use in environments where hazardous material is present.

Convert incandescent, halogen, krypton, and xenon Maglite flashlights into LED flashlights to produce more light and consume less battery power.

Securely store your flashlight when not in use.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

Keep your hands free by wearing a flashlight on your head.

Turn a mini flashlight into a headlamp with these straps.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.

Hang these lights where you need them on the job site.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.

The gooseneck arm on these lights allows you to direct light exactly where it's needed. They have a reflector that distributes light more evenly than other portable lights.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Also known as pendant lights, these fixtures hang from a cord.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement and off after three minutes of not detecting movement.

No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

Suspend these lights overhead or mount them above your workspace.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Mount add-on heads in remote areas to extend emergency lighting.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

Charge these lighters for repeated long-term use.

Use for inspection and bug and rodent detection.

Inspect dim or dark areas with these illuminated mirrors.