You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

These lights cycle through three different flashing patterns.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

These lights can switch between being continuous or flashing.

Mount these lights to the top of towers to warn low-flying aircraft.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.

Mount these lights horizontally or vertically in places where a tower will not fit.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

These bulbs are sized to fit tight spaces such as indicators and vehicle lights.

These miniature bulbs are sized to fit older telephone switchboards, signs, instruments, and indicators.

Fit these bulbs in tight spaces such as signs, control panels, indicators, and flashlights.

Use these as replacement bulbs in stack lights.