These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights. They're sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies.

Aluminum housing lights have a low profile for fitting into tight spaces. They require a power cord to operate (sold separately; see 4-pole micro M12 socket with 12-ft. wire leads). These lights have a durable polyester plastic lens that won't yellow over time. They have a cool light appearance that highlights white/blue tones, which is good for inspecting. They meet IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, as well as IP69K to withstand high-temperature, high-pressure washdowns often used in sanitizing.

Acetal-plastic housing lights are more economical than lights with an aluminum housing. They have a scratch-resistant acrylic lens that won't yellow over time. These lights have a neutral light appearance that is consistent with those often found in workspaces.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting. These lights have a durable polyester lens that won't turn yellow over time. They meet IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, as well as IP69K to withstand high-temperature, high-pressure washdowns often used in sanitizing.

These lights require a power cord to operate (sold separately; see 4-pole micro M12 socket with 12-ft. wire leads).

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover. The LEDs last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting. Mount these lights directly inside machines—they have a durable glass lens that's sealed to keep out fluids, chips, and shavings. They are rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they're built tougher than needed for machine environments.

Brackets that are sold separately are an alternative mounting option. While not required, they clip onto the light anywhere along its length; this permits you to put the mounting fasteners in a place that works for your machine.

Mount these lights into a recessed opening in your machine—they sit flush against the surface for a streamlined appearance. They have a durable tempered-glass lens that's sealed to keep out fluids, chips, and shavings. These lights are rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they're built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting.

Brackets that are sold separately are an alternative mounting option. While not required, they clip onto the light anywhere along its length; this permits you to put the mounting fasteners in a place that works for your machine.

Power supplies, also known as transformers, convert your facility’s 120 or 240 AC voltage into 24 DC voltage, which is required to operate these lights.

Suspend these lights overhead or mount them above your workspace. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. The LEDs produce a cool light appearance that highlights white/blue tones, which is good for inspecting. These lights are furnished with fastener-mount clips; they can also be mounted using the optional adjustable mounting brackets that swivel 180° or the magnetic mounting brackets, both sold separately.

Lights that operate on AC voltage include a 6-ft. power cord. For longer distances, you can swap it for the 10-ft. power cord (sold separately). To link multiple lights using a single electrical outlet, use the 4-pin connecting cord (sold separately); connect a maximum of 10 lights.

Lights that operate on DC voltage require a 4-pole Micro M12 power cord (sold separately) for connecting to a power supply. To link multiple lights using a single power supply, use the 4-pole Micro M12 connecting cord (sold separately); maximum number of connections varies based on your power supply.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines. A hands-free alternative to flashlights and machine lights, these lights slide in between the sight glass and the external bars on your flow sights. Made of flexible silicone, they create a watertight seal against the sight glass, minimizing the space where bacteria can grow. The lights are also totally enclosed, so they’re protected from high-temperature washdowns and harsh cleaners. USP Class VI certified, these lights meet the highest safety standards of the United States Pharmacopoeia.

With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. A neutral light appearance lets you see true colors, which improves the visibility of even dark liquids in dimly lit areas. These lights will not yellow, so the quality of the light will not change. You can also use them to backlight clear containers. They require a power cord with an M12 socket that withstands washdowns (not included).

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Lights produce a cool light appearance that highlights white/blue tones, which is good for inspecting. For indoor and outdoor use.

Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat. They mount to standard 4 1/4" to 5 1/4"-wide housings with the included screws and safety cables. Remove the old bulbs and their wiring before installing these lights.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Lights with a neutral light appearance look less clinical than those with a cool light appearance. They’re common in offices, showrooms, retail stores, and other workspaces.

Lights with a cool light appearance highlight white and blue tones, and they’re brighter than those with a neutral light appearance. Use them in environments that require high visibility, such as warehouses, workshops, and inspection areas.

Also known as channel lights, the ends of these fixtures can be wired together to create long rows of lights to illuminate indoor workspaces such as offices and workshops. Rated for use in damp locations, these lights withstand humidity and moisture. They have built-in LEDs, which last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces. Lights can be hardwired to operate on any of the voltages listed.

Add suspension hardware (sold separately) to hang lights from the ceiling. Includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length and tighten clamps to secure.