Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

These lights can switch between being continuous or flashing.

These lights can switch between continuous, flashing, or revolving.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Choose from seven colors, including nontraditional colors such as magenta and turquoise, for a custom four-light stack light.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

Also known as troffers, these lights fit most standard drop-ceiling grids.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement and off after three minutes of not detecting movement.

Also known as turret lights, these fixtures have uplight or downlight reflectors to direct light.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

A sealed lens keeps moisture out to protect these lights against washdowns.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

These LED lights have an air-tight seal to protect against contaminants.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

Always have a flashlight on hand—these attach to a key ring.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

The smooth stainless steel surface allows for easy cleaning.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

Extend light into hard-to-reach spaces by attaching a fiber-optic cable to your flashlight.

Securely store your flashlight when not in use.

Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.

Rated for use in environments where hazardous material is present.

Keep your hands free by wearing a flashlight on your head.

Rated IP07, these headlamps withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Heads adjust to any angle so you can direct light where needed.

Hardwire these lights to a power source.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.

The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.

Because these lights have a reflector, they distribute light more evenly than other portable lights.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

Mount add-on heads in remote areas to extend emergency lighting.

Rated for use in damp locations, these lights withstand humidity and moisture.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Wire terminals allow you to connect these bulbs to a power source through a panel.

Install miniature light bulbs into control panels, machines, and other devices using bulb holders.

These bulbs are sized to fit tight spaces such as indicators and vehicle lights.

These bulbs are sized to fit tight spaces such as signs, control panels, indicators, and flashlights.

Use these bulbs in standard sockets, panels, and appliances.

Turn standard light bulb sockets into standalone floodlight fixtures using these bulbs, which have an aluminum reflector to focus light downward and add a finished look.

Pins on the base lock these bulbs into sockets to withstand vibration.

Replace metal halide, high-pressure sodium, and mercury vapor light bulbs with longer-lasting, energy-efficient LEDs.

Replace screw-in incandescent bulbs in exit signs with longer-lasting, energy-efficient LEDs.

Often used in task lights, these four-pin wedge base bulbs are comparable to PL, Dulux, and Biax bulbs.

Use these as replacement bulbs in stack lights.