McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    24 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Swivel Leveling Mounts with Threaded Stud

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.

    Without Cushion

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base and Stud
    1 1/4"-7
    4"7.5°6"43,0006 3/4"6111K161000000032,2506 7/8"Natural Rubber
    6111K2580000000
    1 1/4"-7
    6"7.5°6"43,0008 3/4"6111K16200000032,2508 7/8"Natural Rubber
    6111K676000000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    1 1/4"-7
    4"7.5°6"43,0006 3/4"6111K17600000032,2506 7/8"Natural Rubber
    6111K212000000
    1 1/4"-7
    6"7.5°6"43,0008 3/4"6111K177000000———0
     
    Black-Oxide Steel Base and Zinc-Plated Steel Stud
    1 1/4"-7
    6"7.5°6"43,0008 3/4"6111K245000000———0
     
    303 Stainless Steel Base and Stud
    1 1/4"-7
    4"7.5°6"———032,2006 7/8"Natural Rubber
    5546N39000000
    1 1/4"-7
    6"7.5°6"43,0008 3/4"6111K19800000032,2008 7/8"Natural Rubber
    5546N41000000
     

    Swivel Leveling Mounts with Threaded Hole

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, Without Cushion.

    Without Cushion

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, With Cushion.

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Dp.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base
    1 1/4"-7
    1 1/8"7.5°6"43,0002 3/4"6103K21500000032,2502 7/8"Natural Rubber
    6103K236000000
     
    Zinc-Yellow-Chromate-Plated Steel Base
    1 1/4"-7
    1 1/8"7.5°6"43,0002 3/4"6103K2160000032,2502 7/8"Natural Rubber
    6103K18700000
     
    Black-Oxide Steel Base
    1 1/4"-7
    1 1/8"7.5°6"43,0002 3/4"6103K1450000032,2502 7/8"Natural Rubber
    6103K34400000
     
    303 Stainless Steel Base
    1 1/4"-7
    1"7.5°6"43,0002 3/4"6103K228000000———0
     
    Delrin® Acetal Base
    1 1/4"-7
    1 1/8"7.5°6"3,6002 3/4"6103K123000003,6002 7/8"Natural Rubber
    6103K11200000
     

    Vibration-Damping Swivel Leveling Mounts with Threaded Hole

    Image of Product. Front orientation. Leveling Mounts. Vibration-Damping Swivel Leveling Mounts with Threaded Hole, With Cushion.

    With Cushion

    A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    With Plastic Cushion
    Thread
    Size
    Thread
    Dp.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion
    Material
    Each
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion Material
    Each
    Zinc-Yellow-Chromate-Plated Steel Base
    1 1/4"-7
    1 1/4"7.5°6"2 7/8"10,0000.06"Neoprene
    6319K5300000027,1000.08"Fiber-Reinforced Nylon6319K590000000
     

    Vibration-Damping Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Vibration-Damping Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    With Plastic Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion
    Material
    Each
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion Material
    Each
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    1 1/4"-7
    4"7.5°6"6 7/8"10,0000.06"Neoprene
    6330K33000000027,1000.08"Fiber-Reinforced Nylon6330K390000000
     
    back to top