About Durometer Hardness Scales
More
About Leveling Mounts
More
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Stud
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Performance | Each | |
Nickel-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
10-32 | 1" | 700 | 3/4" | 1 1/2" | -20° to 170° | __ | 0000000 | 00000 |
10-32 | 2" | 700 | 3/4" | 2 1/2" | -20° to 170° | __ | 0000000 | 0000 |
Nickel-Plated Steel with Rubber Cushion | ||||||||
10-32 | 1" | 525 | 3/4" | 1 5/8" | -20° to 170° | Antislip | 00000000 | 0000 |
10-32 | 2" | 525 | 3/4" | 2 5/8" | -20° to 170° | Antislip | 00000000 | 0000 |
Black-Oxide Steel Swivel Leveling Mounts with Threaded Stud
Black-oxide steel has a dull shine for areas where appearance is a concern. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Black Oxide Steel with Zinc-Plated Steel Stud | ||||||||
---|---|---|---|---|---|---|---|---|
10-32 | 1" | 700 | 3/4" | 1 1/2" | 3/8" | -20° to 170° | 00000000 | 00000 |
10-32 | 2" | 700 | 3/4" | 2 1/2" | 3/8" | -20° to 170° | 00000000 | 0000 |
Black Oxide Steel with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||
10-32 | 1" | 525 | 3/4" | 1 5/8" | 3/8" | -20° to 170° | 00000000 | 0000 |
10-32 | 2" | 525 | 3/4" | 2 5/8" | 3/8" | -20° to 170° | 00000000 | 0000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Stud
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Yellow Zinc-Plated Steel | |||||||
---|---|---|---|---|---|---|---|
10-32 | 1" | 700 | 3/4" | 1 1/2" | -20° to 170° | 0000000 | 00000 |
10-32 | 2" | 700 | 3/4" | 2 1/2" | -20° to 170° | 0000000 | 0000 |
Yellow Zinc-Plated Steel with Rubber Cushion | |||||||
10-32 | 1" | 525 | 3/4" | 1 5/8" | -20° to 170° | 0000000 | 0000 |
10-32 | 2" | 525 | 3/4" | 2 5/8" | -20° to 170° | 00000000 | 0000 |
Plastic Swivel Leveling Mounts with Threaded Stud
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||
---|---|---|---|---|---|---|---|
10-32 | 1" | 150 | 3/4" | 1 1/2" | -20° to 170° | 0000000 | 00000 |
10-32 | 2" | 150 | 3/4" | 2 1/2" | -20° to 170° | 00000000 | 0000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||
10-32 | 1" | 150 | 3/4" | 1 5/8" | -20° to 170° | 00000000 | 0000 |
10-32 | 2" | 150 | 3/4" | 2 5/8" | -20° to 170° | 00000000 | 0000 |
Corrosion-Resistant Swivel Leveling Mounts with Threaded Stud
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Swivel Range of Motion | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
303 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
10-32 | 1" | 700 | 7.5° | 3/4" | 1 1/2" | 3/8" | -20° to 170° | 0000000 | 000000 |
10-32 | 2" | 700 | 7.5° | 3/4" | 2 1/2" | 3/8" | -20° to 170° | 0000000 | 00000 |
303 Stainless Steel with Rubber Cushion | |||||||||
10-32 | 1" | 525 | 7.5° | 3/4" | 1 5/8" | 3/8" | 0° to 180° | 0000000 | 00000 |
10-32 | 2" | 525 | 7.5° | 3/4" | 2 5/8" | 3/8" | 0° to 180° | 0000000 | 00000 |
Super-Corrosion-Resistant Swivel Leveling Mounts with Threaded Stud
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Bolt-Down Swivel Leveling Mounts with Threaded Stud
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Performance | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||||||||
10-32 | 1" | 700 | 2" | 2 1/8" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Stay Put | 00000000 | 00000 |
10-32 | 2" | 700 | 2" | 3 1/8" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Stay Put | 00000000 | 0000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||||||||
10-32 | 1" | 700 | 2" | 2 3/16" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Antislip, Stay Put | 00000000 | 0000 |
10-32 | 2" | 700 | 2" | 3 3/16" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Antislip, Stay Put | 00000000 | 00000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Hole
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Hole
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Black-Oxide Steel Swivel Leveling Mounts with Threaded Hole
Black-oxide steel has a dull shine for areas where appearance is a concern. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Plastic Swivel Leveling Mounts with Threaded Hole
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base. They have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Swivel Leveling Mounts with Threaded Hole
Made of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a rubber cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Super-Corrosion-Resistant Swivel Leveling Mounts with Threaded Hole
Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Each | |
316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
10-32 | 3/16" | 700 | 3/4" | 1/2" | 3/8" | 00000000 | 000000 |
Threaded-Stud Bumpers
Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.
Bumpers with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
SBR bumpers have good abrasion resistance. They're also nonmarking.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Threaded-Stud Bumpers
All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole. All are nonmarking and can be used outdoors.
Bumpers with a hard rating withstand high levels of impact. Bumpers with a medium-soft rating offer a balance of cushioning and impact resistance.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
Style 2 bumpers have a hex shoulder for easier tightening.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | OD | Ht. | Overall Ht. | Hex Wd. | Hex Nut Material | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Features | Color | Each | |
Style 2 | |||||||||||||||
Neoprene Rubber with Steel Core | |||||||||||||||
10-32 | 1/2" | 3/4" | 5/8" | 1 5/16" | 3/8" | Steel | -40° to 200° | Yes | Hard | Durometer 80A | No | Hex Shoulder | Black | 0000000 | 00000 |
10-32 | 1/2" | 3/4" | 5/8" | 1 5/16" | 3/8" | Steel | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Hex Shoulder | Black | 00000000 | 00000 |
10-32 | 1 1/4" | 3/4" | 5/8" | 2 1/16" | 3/8" | Steel | -40° to 200° | Yes | Hard | Durometer 70A | No | Hex Shoulder | Black | 00000000 | 0000 |
10-32 | 1 1/4" | 3/4" | 5/8" | 2 1/16" | 3/8" | Steel | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Hex Shoulder | Black | 00000000 | 00000 |
Polyurethane Rubber with Steel Core | |||||||||||||||
10-32 | 1/2" | 3/4" | 5/8" | 1 1/4" | 7/16" | Steel | -60° to 200° | Yes | Medium Soft | Durometer 40A | No | Hex Shoulder | Red | 0000000 | 00000 |
10-32 | 1/2" | 3/4" | 5/8" | 1 5/16" | 1/2" | Steel | -60° to 200° | Yes | Hard | Durometer 80A | No | Hex Shoulder | Red | 0000000 | 0000 |
10-32 | 1 1/4" | 3/4" | 5/8" | 2" | 7/16" | Steel | -60° to 200° | Yes | Medium Soft | Durometer 40A | No | Hex Shoulder | Red | 0000000 | 00000 |
10-32 | 1 1/4" | 3/4" | 5/8" | 2 1/16" | 1/2" | Steel | -60° to 200° | Yes | Hard | Durometer 80A | No | Hex Shoulder | Red | 00000000 | 00000 |
Threaded Bumpers
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with a soft rating offer cushioning.
Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions.
Bumpers with an extra-hard, hard, and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Buna-N bumpers resist abrasion, oil, and grease.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Steel Core | |||||||||||
10-32 | 1/4" | 3/4" | 5/8" | -60° to 175° | Yes | Hard | Durometer 70A | Yes | White | 00000000 | 00000 |
Neoprene Rubber with Steel Core | |||||||||||
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Hard | Durometer 70A | No | Black | 0000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 0000 |
Polyurethane Rubber with Steel Core | |||||||||||
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Extra Hard | Durometer 95A | No | Black | 00000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 0000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Medium | Durometer 50A | No | Red | 00000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Red | 000000 | 0000 |
10-32 | 1/4" | 3/4" | 5/8" | -40° to 200° | Yes | Soft | Durometer 30A | No | Red | 00000000 | 0000 |