M10 Levels | McMaster-Carr

Filter by

System of Measurement

Mount Type

Mount Movement

Overall Height

Thread Length

Base Material

Base Diameter

Capacity per Mount

Base Shape

Stud Material

Thread Pitch

Thread Type

Stud Drive Style

Leg Shape

Shape

Cushion Material

Bracket Width

Hex Nut Material

Stud Finish

Zinc Yellow-Chromate Plated

With Cushion

Yes

Mounting Hole Diameter

RoHS

Compliant with Exemptions

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

103 Products

About Leveling Mounts

Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

Swivel Leveling Mounts with Threaded Stud

With Cushion

Without Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm		Each
Nickel-Plated Steel Base and Steel Stud


		M10 × 1.5 mm	51	7.5°	32	3,700	73	00000000	000000	2,700	76	00000000	000000

		Zinc-Yellow-Chromate-Plated Steel Base and Stud


				M10 × 1.5 mm	51	7.5°	32	3,740	73	0000000	0000	2,795	76	0000000	0000

				303 Stainless Steel Base and Stud


						M10 × 1.5 mm	51	7.5°	32	3,740	73	0000000	00000	2,790	76	00000000	00000

						316 Stainless Steel Base and Stud


								M10 × 1.5 mm	51	7.5°	32	3,740	73	0000000	00000	—	—	———	0

Stay-Put Swivel Leveling Mounts with Threaded Stud

Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Two Mounting Holes


With Cushion	Without Cushion

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

						Mounting Holes, mm		Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud


		M10 × 1.5 mm	76	7.5°	51	No	6.4	33.8	4,000	105	0000000	000000	4,000	106.6	0000000	000000
		M10 × 1.5 mm	76	7.5°	76	No	8.9	55.9	5,000	104	00000000	00000	5,000	105.6	00000000	00000
		M10 × 1.5 mm	102	7.5°	51	No	6.4	33.8	4,000	130	0000000	00000	4,000	131.6	0000000	00000
		M10 × 1.5 mm	102	7.5°	76	No	8.9	55.9	5,000	130	0000000	0000	5,000	131.6	0000000	00000
		M10 × 1.5 mm	152	7.5°	51	No	6.4	33.8	4,000	181	00000000	00000	4,000	182.6	00000000	00000
		M10 × 1.5 mm	152	7.5°	76	No	8.9	55.9	5,000	181	00000000	00000	—	—	———	0
		M10 × 1.5 mm	203	7.5°	76	No	8.9	55.9	5,000	232	00000000	00000	5,000	233.6	00000000	00000

		Glass-Filled Nylon Base and 303 Stainless Steel Stud


				M10 × 1.5 mm	76	7.5°	76	No	8.9	55.9	5,000	104	00000000	00000	—	—	———	0
				M10 × 1.5 mm	102	7.5°	80	No	8.9	55.9	5,000	130	0000000	00000	5,000	131.6	0000000	00000

Rigid Leveling Mounts with Threaded Stud

Style 1

Style 2

Level equipment on uneven floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of your machine.

Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Base Dia., mm	Overall Ht., mm		Each
Zinc-Plated Steel Base and Stud with Plastic Cushion


	1	M10 × 1.5 mm	51	250	52	76	00000000	00000
	1	M10 × 1.5 mm	51	250	61	76	00000000	0000
	1	M10 × 1.5 mm	102	250	61	127	00000000	0000

	303 Stainless Steel Base and Stud with Plastic Cushion


			1	M10 × 1.5 mm	51	250	61	76	00000000	00000

			Plastic Base and Stud


					2	M10 × 1.5 mm	25	125	30	39	0000000	0000
					2	M10 × 1.5 mm	50	125	30	64	0000000	0000
					2	M10 × 1.5 mm	80	125	30	94	0000000	0000

Swivel Leveling Mounts with Threaded Hole

With Cushion

Without Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm		Each
Zinc-Yellow-Chromate-Plated Steel Base


		M10 × 1.5 mm	9.4	7.5°	32	3,740	22	0000000	00000	2,795	25	0000000	00000

		303 Stainless Steel Base


				M10 × 1.5 mm	9.6	7.5°	32	3,740	22	0000000	00000	2,795	25	0000000	00000

Rigid Leveling Mounts with Bracket


Style 1	Style 2

Level furniture without feet, such as cabinets and workbenches, on uneven surfaces. Attach the bracket using the included screws.

Steel Base—These mounts are best for dry environments since moisture will cause them to rust.

Plastic Base—These mounts won't scratch or scuff floors when you're moving equipment.

								Bracket					Mounting Holes
	Style	Thread Size	Thread Lg.	Cap. per Mount, lb.	Stud Drive Style	Base Dia.	Overall Ht.	Wd.	Dp.	Ht.	Material	Mounting Fasteners Included	No. of	Dia.	Pkg. Qty.		Pkg.
Steel Base and Zinc-Plated Steel Stud


		1	M10 × 1.5 mm	2 1/2"	100	Hex	2"	2 3/4"	4 15/16"	1 15/16"	1 7/16"	Zinc-Plated Steel	Yes	4	3/16"	2	000000	000000

		Plastic Base and Zinc-Plated Steel Stud


				2	M10 × 1.5 mm	2 7/8"	100	Hex	1 1/4"	3 1/4"	2 1/8"	1 3/4"	2 1/8"	Zinc-Plated Steel	Yes	4	3/16"	4	000000	00000

Reinforced Threaded-Stud Bumpers

Style 1

With a metal core for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.

Style 1

Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Core Material	Nonmarking	For Use Outdoors		Each
Multipurpose Neoprene


		M10 × 1.5 mm	15	32	32	47	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	000000
		M10 × 1.5 mm	15	32	32	47	Durometer 75A	Hard	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	00000
		M10 × 1.5 mm	30	32	32	62	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	00000
		M10 × 1.5 mm	30	32	32	62	Durometer 75A	Hard	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	00000

		Abrasion-Resistant Polyurethane Rubber


				M10 × 1.5 mm	15	32	32	47	Durometer 80A	Hard	Red	-60 to 200	Steel	Steel	Yes	Yes	00000000	00000
				M10 × 1.5 mm	30	32	32	62	Durometer 40A	Medium Soft	Red	-60 to 200	Steel	Steel	Yes	Yes	0000000	00000
				M10 × 1.5 mm	30	32	32	62	Durometer 80A	Hard	Red	-60 to 200	Steel	Steel	Yes	Yes	00000000	00000

Load-Rated Reinforced Threaded-Stud Bumpers


Style 1	Style 2	Style 7

These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 5,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.

Style 1

Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

Steel Stud—Durable and economical, these are the choice for most jobs.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Natural Rubber with Steel Stud and Base Plate


		M10 × 1.5 mm	27	70	30	1,610	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	000000
		M10 × 1.5 mm	27	70	30	2,930	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	27	70	40	920	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
		M10 × 1.5 mm	27	70	55	1,010	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
		M10 × 1.5 mm	28	50	20	580	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
		M10 × 1.5 mm	28	50	20	1,670	Durometer 70A	Hard	Black	-40 to 170	No	No	0000000	00000
		M10 × 1.5 mm	28	50	30	550	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
		M10 × 1.5 mm	28	50	30	1,210	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	50	40	550	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
		M10 × 1.5 mm	28	50	40	1,110	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	50	50	600	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	50	50	940	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	60	20	860	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	60	40	790	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	60	60	1,820	Durometer 70A	Hard	Black	-40 to 170	No	No	0000000	00000

		Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate


				M10 × 1.5 mm	27	70	30	1,610	Durometer 55A	Medium	Black	-40 to 170	No	No	0000000	00000
				M10 × 1.5 mm	28	50	20	580	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
				M10 × 1.5 mm	28	50	30	550	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
				M10 × 1.5 mm	28	50	40	550	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	00000
				M10 × 1.5 mm	28	50	50	600	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000
				M10 × 1.5 mm	28	60	20	780	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000

Style 2

Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Steel Stud—Durable and economical, these are the choice for most jobs.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Natural Rubber with Steel Stud and Base Plate


		M10 × 1.5 mm	28	50	50	210	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	000000
		M10 × 1.5 mm	28	50	50	250	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000
		M10 × 1.5 mm	28	50	68	190	Durometer 50A	Medium	Black	-10 to 150	No	No	0000000	00000
		M10 × 1.5 mm	28	50	68	430	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	00000

Style 7

Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

Steel Stud—Durable and economical, these are the choice for most jobs.

	Thread
	Size	Lg., mm	OD, mm	Ht.	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Oil-Resistant Buna-N with Steel Stud and Base Plate


		M10 × 1.5 mm	40	50	1 11/16"	360	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	000000

		Oil-Resistant Buna-N with Corrosion-Resistant Stainless Steel Stud and Base Plate


				M10 × 1.5 mm	40	50	1 11/16"	360	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	00000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Style 1

Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Core Material	Nonmarking	For Use Outdoors		Each
Multipurpose Neoprene


		M10 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	00000000	000000
		M10 × 1.25 mm	13	32	32	Durometer 75A	Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000
		M10 × 1.5 mm	13	32	32	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000

		Abrasion-Resistant Polyurethane Rubber


				M10 × 1.25 mm	13	32	32	Durometer 30A	Soft	Red	-40 to 200	Steel	No	Yes	00000000	00000
				M10 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	0000000	00000
				M10 × 1.25 mm	13	32	32	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	00000000	00000
				M10 × 1.25 mm	13	32	32	Durometer 60A	Medium Hard	Red	-40 to 200	Steel	No	Yes	00000000	00000
				M10 × 1.25 mm	13	32	32	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	00000000	00000
				M10 × 1.5 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	00000000	00000
				M10 × 1.5 mm	13	32	32	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000

Load-Rated Reinforced Threaded-Hole Bumpers


Style 1	Style 2

These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 2,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Style 1

Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Natural Rubber with Steel Base Plate


		M10 × 1.5 mm	10	50	20	580	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	000000
		M10 × 1.5 mm	10	50	20	600	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	50	20	1,670	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	50	30	400	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	50	30	550	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
		M10 × 1.5 mm	10	50	30	1,210	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	50	40	550	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
		M10 × 1.5 mm	10	50	40	1,110	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	60	30	720	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	60	30	1,200	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	70	30	1,610	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	00000
		M10 × 1.5 mm	10	70	40	920	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
		M10 × 1.5 mm	10	70	55	1,010	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000

		Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate


				M10 × 1.5 mm	10	50	20	580	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
				M10 × 1.5 mm	10	50	30	550	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
				M10 × 1.5 mm	10	50	40	550	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	00000
				M10 × 1.5 mm	10	50	50	600	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	00000

Style 2

Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Natural Rubber with Steel Base Plate


		M10 × 1.5 mm	10	50	68	190	Durometer 55A	Medium	Black	-20 to 150	Yes	No	0000000	000000
		M10 × 1.5 mm	10	50	68	430	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	00000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

Square Base

	For Leg
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	Thread Size	Thread Dp.	Temp. Range, ° F		Each
Plastic with Brass Insert


		1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	M10 × 1.5 mm	1"	-20 to 180	00000000	00000
		2"	2"	1 3/4"	1 3/4"	2,000	2"	M10 × 1.5 mm	1"	-20 to 180	00000000	0000

Round Base

	For Leg
	ID	OD	Cap. per Mount, lb.	Overall Ht.	Thread Size	Thread Dp.	Temp. Range, ° F		Each
Plastic with Brass Insert


		1 5/16"	1 1/2"	1,500	1 11/16"	M10 × 1.5 mm	1"	-20 to 180	00000000	00000
		1 13/16"	2"	2,000	1 15/16"	M10 × 1.5 mm	1"	-20 to 180	00000000	0000