No-Twist C-Clamps
The jaws move in unison to apply even pressure and prevent twisting. These clamps have grooved clamping surfaces that are good for holding round material. They also known as cantilever clamps.
Stainless steel clamps have excellent corrosion resistance.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Zinc-Plated Steel Body | ||||||
T-Handle | ||||||
| 3/4" | 0" | 3/8" | 200 | Copper-Plated Steel | 0000000 | 000000 |
| 1" | 0" | 1/2" | 350 | Copper-Plated Steel | 0000000 | 00000 |
| 1 1/2" | 0" | 1" | 600 | Copper-Plated Steel | 0000000 | 00000 |
| 2" | 0" | 1 1/4" | 800 | Copper-Plated Steel | 0000000 | 00000 |
| 2 1/2" | 0" | 1 3/4" | 700 | Copper-Plated Steel | 0000000 | 00000 |
| 3" | 0" | 1 3/4" | 1,500 | Copper-Plated Steel | 0000000 | 00000 |
| 4 1/2" | 0" | 2 3/8" | 1,700 | Copper-Plated Steel | 0000000 | 00000 |
| 6" | 0" | 5" | 2,000 | Copper-Plated Steel | 0000000 | 00000 |
| 9 1/2" | 0" | 3 3/4" | 2,500 | Copper-Plated Steel | 0000000 | 000000 |
| 10" | 0" | 6 1/2" | 3,500 | Copper-Plated Steel | 0000000 | 000000 |
| 12" | 0" | 5 1/2" | 6,000 | Copper-Plated Steel | 0000000 | 000000 |
18-8 Stainless Steel  | ||||||
T-Handle | ||||||
| 2" | 0" | 1 1/4" | 700 | 18-8 Stainless Steel | 0000000 | 00000 |
| 3" | 0" | 1 1/4" | 1,200 | 18-8 Stainless Steel | 0000000 | 00000 |
| 4 1/2" | 0" | 2 3/8" | 1,500 | 18-8 Stainless Steel | 0000000 | 00000 |
Bench-Mount No-Twist C-Clamps
Hold the workpiece down against a bench or table. The screw is separate from the pivoting clamping surface, moving it into place for a firm grip without twisting. The clamping surface and screw are copper plated to resist weld spatter. These are also known as cantilever clamps.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Reach | Holding Capacity, lbs. | Screw Material | Lg. | Wd. | Ht. | No. of Mounting Holes (Diameter) | Mounting Fasteners Included | Each | |
Zinc-Plated Steel Body | ||||||||||
T-Handle | ||||||||||
| 2 1/2" | 2 1/2" | 1,500 | Copper-Plated Steel | 6 1/8" | 2 11/16" | 3 1/2" | 4 (9/32") 2 (1/4") | No | 0000000 | 000000 |
| 5" | 4 1/4" | 3,200 | Copper-Plated Steel | 8 7/8" | 3 3/4" | 5 3/4" | 6 (5/16") | No | 0000000 | 00000 |
Nonmarring No-Twist C-Clamps
Plastic clamping surfaces prevent damage to material. The jaws on these clamps move in unison to apply even pressure and prevent twisting. They are also known as cantilever clamps.
Three-Way No-Twist C-Clamps
Clamp the side of a workpiece as well as the top and bottom. These clamps have jaws that move in unison to apply even pressure and prevent twisting. The grooved clamping surfaces are good for holding round material. Copper plating on the clamping surfaces and screw resists weld spatter. They are also known as cantilever clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Zinc-Plated Steel | ||||||
T-Handle | ||||||
| 6" | 0" | 2 1/8" | 2,000 | Copper-Plated Steel | 0000000 | 0000000 |
C-Clamps
Steel clamps are stronger than iron clamps.
Copper-plated clamp components resist weld spatter.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Powder-Coated Iron Body | ||||||
Steel Sliding T-Handle | ||||||
| 1" | 0" | 1 1/16" | 600 | Steel | 0000000 | 00000 |
| 1 1/2" | 0" | 1 1/2" | 800 | Steel | 0000000 | 0000 |
| 2" | 0" | 1 1/8" | 800 | Steel | 0000000 | 0000 |
| 2 1/2" | 0" | 1 7/16" | 800 | Steel | 0000000 | 00000 |
| 2 1/2" | 0" | 2 1/2" | 1,000 | Steel | 0000000 | 00000 |
| 3" | 0" | 2" | 1,400 | Steel | 0000000 | 00000 |
| 4" | 0" | 2 3/4" | 1,500 | Steel | 0000000 | 00000 |
| 5" | 0" | 3" | 1,200 | Steel | 0000000 | 00000 |
| 6" | 0" | 3 1/4" | 1,400 | Steel | 0000000 | 00000 |
| 8" | 0" | 4" | 1,700 | Steel | 0000000 | 00000 |
Powder-Coated Steel Body | ||||||
Black Oxide Steel Sliding T-Handle | ||||||
| 2" | 0" | 2 1/8" | 3,500 | Black Oxide Steel | 0000000 | 00000 |
| 3" | 0" | 2 3/8" | 3,500 | Black Oxide Steel | 0000000 | 00000 |
| 4" | 0" | 3 1/4" | 6,200 | Black Oxide Steel | 0000000 | 00000 |
| 6" | 0" | 4 1/8" | 6,900 | Black Oxide Steel | 0000000 | 00000 |
| 10" | 0" | 6" | 8,000 | Black Oxide Steel | 0000000 | 00000 |
| 12" | 0" | 6 1/4" | 9,300 | Black Oxide Steel | 00000000 | 000000 |
Iron Body | ||||||
Steel Sliding T-Handle | ||||||
| 2 1/2" | 0" | 1 3/4" | 1,100 | Steel | 000000 | 00000 |
| 3" | 0" | 1 7/8" | 1,800 | Steel | 000000 | 00000 |
| 4" | 0" | 2 1/16" | 2,100 | Steel | 000000 | 00000 |
| 5" | 0" | 2 1/2" | 2,200 | Steel | 000000 | 00000 |
| 6" | 0" | 2 3/4" | 2,400 | Steel | 000000 | 00000 |
| 8" | 0" | 3 1/4" | 2,700 | Steel | 0000000 | 00000 |
| 10" | 0" | 3 5/8" | 2,850 | Steel | 0000000 | 00000 |
| 12" | 0" | 3 5/8" | 2,850 | Steel | 0000000 | 00000 |
| 14" | 0" | 3 3/4" | 2,850 | Steel | 000000 | 000000 |
Steel Body | ||||||
Black Oxide Steel Sliding T-Handle | ||||||
| 8 1/4" | 0" | 4 15/16" | 6,900 | Black Oxide Steel | 0000000 | 000000 |
Copper-Plated Steel Sliding T-Handle | ||||||
| 2 1/8" | 0" | 2 1/4" | 3,500 | Copper-Plated Steel | 0000000 | 00000 |
| 4 1/4" | 0" | 3 1/4" | 6,200 | Copper-Plated Steel | 00000000 | 00000 |
| 6 1/16" | 0" | 4 1/16" | 6,600 | Copper-Plated Steel | 00000000 | 00000 |
| 8 1/4" | 0" | 4 15/16" | 6,900 | Copper-Plated Steel | 0000000 | 000000 |
| 10 1/8" | 2" | 5 7/8" | 8,000 | Copper-Plated Steel | 0000000 | 000000 |
| 12 1/4" | 2" | 6 1/4" | 9,300 | Copper-Plated Steel | 00000000 | 000000 |
Heavy Duty C-Clamps
These clamps have twice the capacity of standard C-clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Steel Body | ||||||
Sliding T-Handle | ||||||
| 2 15/16" | 0" | 2" | 8,750 | Steel | 000000 | 0000000 |
| 3 3/4" | 0" | 2 3/8" | 10,000 | Steel | 000000 | 000000 |
| 5 3/4" | 7/8" | 2 1/2" | 11,250 | Steel | 000000 | 000000 |
| 7 3/4" | 2 11/16" | 2 5/8" | 12,500 | Steel | 000000 | 000000 |
| 9 7/8" | 5 1/16" | 2 11/16" | 13,750 | Steel | 000000 | 000000 |
| 11 3/4" | 7" | 2 7/8" | 15,000 | Steel | 000000 | 000000 |
Lightweight Aluminum C-Clamps
Lighter weight than other metal clamps, these are less likely to bend thin material.
Copper-plated clamp components resist weld spatter.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Sliding T-Handle | ||||||
| 1 1/4" | 0" | 1 1/4" | Not Rated | Copper-Plated Steel | 0000000 | 000000 |
| 2 1/4" | 0" | 1 3/8" | Not Rated | Copper-Plated Steel | 0000000 | 00000 |
| 2 3/4" | 0" | 1 5/8" | Not Rated | Copper-Plated Steel | 0000000 | 00000 |
| 3 3/4" | 0" | 1 5/8" | Not Rated | Copper-Plated Steel | 0000000 | 00000 |
| 4 5/8" | 0" | 2 1/8" | Not Rated | Copper-Plated Steel | 0000000 | 00000 |
| 5 5/8" | 0" | 2 3/8" | Not Rated | Copper-Plated Steel | 0000000 | 00000 |
Corrosion-Resistant C-Clamps
Made of stainless steel, these clamps have excellent corrosion resistance.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Stainless Steel Body | ||||||
With Sliding T-Handle | ||||||
| 2" | 0" | 2 1/8" | 1,400 | 316 Stainless Steel | 0000000 | 000000 |
| 3" | 0" | 2 1/2" | 1,400 | 316 Stainless Steel | 0000000 | 00000 |
| 4" | 0" | 2 7/8" | 2,600 | 316 Stainless Steel | 0000000 | 000000 |
| 6" | 0" | 3 3/4" | 2,800 | 316 Stainless Steel | 0000000 | 000000 |
| 8" | 0" | 4 3/4" | 2,800 | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 0" | 5 5/8" | 3,200 | 316 Stainless Steel | 0000000 | 000000 |
| 12" | 0" | 6" | 3,800 | 316 Stainless Steel | 0000000 | 000000 |
High-Visibility C-Clamps
A bright finish makes these clamps easy to see.
Opening | |||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Color | Screw Material | Each | |
Powder-Coated Steel Body | |||||||
Sliding T-Handle | |||||||
| 2" | 0" | 2 1/8" | 3,500 | Yellow | Copper Plated Steel | 00000000 | 000000 |
| 3" | 0" | 2 3/8" | 3,500 | Yellow | Copper Plated Steel | 00000000 | 00000 |
| 4" | 0" | 3 1/4" | 6,200 | Yellow | Copper Plated Steel | 000000000 | 00000 |
| 6" | 0" | 4 1/8" | 6,900 | Yellow | Copper Plated Steel | 00000000 | 00000 |
| 8" | 0" | 5" | 6,900 | Yellow | Copper Plated Steel | 00000000 | 00000 |
| 10" | 0" | 6" | 8,000 | Yellow | Copper Plated Steel | 00000000 | 000000 |
| 12" | 0" | 6 1/4" | 9,300 | Yellow | Copper Plated Steel | 000000000 | 000000 |
Three-Way C-Clamps
Three screws apply pressure to three sides of a workpiece.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Powder-Coated Iron | ||||||
Sliding T-Handle | ||||||
| 2 1/2" | 0" | 2 1/2" | 300 | Steel | 0000000 | 000000 |
Narrow-Body C-Clamps
The clamp body is extra-slim to fit into narrow openings.
Opening | Body | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Wd. | Ht. | Screw Material | Each | |
Steel Body | ||||||||
Sliding T-Handle | ||||||||
| 1" | 0" | 1" | 500 | 7/16" | 2 1/4" | Zinc-Plated Steel | 000000 | 00000 |
| 1" | 0" | 1 1/2" | 500 | 7/16" | 2 7/16" | Zinc-Plated Steel | 000000 | 0000 |
| 1 1/4" | 0" | 1 1/4" | 800 | 7/16" | 2 5/8" | Zinc-Plated Steel | 000000 | 0000 |
| 1 1/2" | 0" | 1 1/2" | 850 | 1/2" | 3" | Zinc-Plated Steel | 000000 | 00000 |
| 2" | 0" | 1 1/4" | 875 | 11/16" | 3 7/8" | Zinc-Plated Steel | 000000 | 00000 |
| 2 1/2" | 0" | 2 1/2" | 850 | 5/8" | 4 7/8" | Zinc-Plated Steel | 000000 | 00000 |
| 3" | 0" | 1 3/8" | 1,100 | 11/16" | 4 15/16" | Zinc-Plated Steel | 000000 | 00000 |
Extended-Reach C-Clamps
Clamp farther in from the edge of a workpiece than with other C-clamps.
Steel clamps are stronger than iron clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Powder-Coated Iron Body | ||||||
Sliding T-Handle | ||||||
| 1" | 0" | 3" | 350 | Black-Oxide Steel | 000000 | 000000 |
| 2" | 0" | 3 1/2" | 450 | Black-Oxide Steel | 000000 | 00000 |
| 2 1/2" | 0" | 4 3/4" | 1,600 | Black-Oxide Steel | 000000 | 00000 |
| 2 1/2" | 0" | 6 1/4" | 1,600 | Black-Oxide Steel | 000000 | 00000 |
| 3" | 0" | 4 1/2" | 700 | Black-Oxide Steel | 000000 | 00000 |
Steel Body | ||||||
Sliding T-Handle | ||||||
| 4" | 0" | 4" | 4,100 | Steel | 000000 | 00000 |
| 4" | 0" | 6 1/4" | 1,600 | Copper-Plated Steel | 0000000 | 00000 |
| 6" | 0" | 5" | 5,400 | Steel | 000000 | 00000 |
| 6" | 0" | 9 7/8" | 1,800 | Copper-Plated Steel | 0000000 | 000000 |
| 8" | 0" | 13 3/4" | 2,000 | Copper-Plated Steel | 0000000 | 000000 |
| 8" | 2" | 6" | 5,900 | Steel | 000000 | 000000 |
| 10" | 0" | 15 3/4" | 2,400 | Copper-Plated Steel | 0000000 | 000000 |
Fast-Action C-Clamps
Press the quick-release button and slide the screw into position to make adjustments in less time. Turn the screw for final tightening.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Iron Body | ||||||
Sliding T-Handle | ||||||
| 6 1/4" | 0" | 3 7/8" | 1,200 | Steel | 00000000 | 000000 |