Push/Pull Toggle Clamps
Hold workpieces from the side.
Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plunger | When Clamped | Replacement Handle Grips | ||||||||||||||
| Holding Cap., lbs. | Lg. | Ht. | Travel | Shape | Dia. | Wd. | Threading | Thread Size  | Thread Lg. | O'all Ht. | O'all Lg. | Grip Style | Each | Each | ||
Push/Pull—Steel | ||||||||||||||||
| 300 | 1 7/8" | 1" | 1 1/4" | Round | 7/16" | __ | Internal | 5/16"-18 | 1" | 3 1/4" | 5 15/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 300 | 2" | 1" | 1 1/4" | Round | 7/16" | __ | Internal | 5/16"-18 | 1" | 3 9/32" | 5 15/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | __ | Internal | 5/16"-18 | 1" | 3 7/16" | 4 25/32" | Cushion | 0000000 | 00000 | 00000000 | 00000 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Round | 1/2" | __ | Internal | 5/16"-18 | 1" | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Square | __ | 1/2" | Internal | 5/16"-18 | 1" | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 1/2" | 1 11/16" | 1 5/8" | Round | 5/8" | __ | Internal | 3/8"-16 | 1 1/4" | 4 13/32" | 6 23/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 850 | 1 5/8" | 1 1/4" | 1 5/8" | Round | 5/8" | __ | Internal | 3/8"-16 | 1 1/4" | 4 1/32" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | __ | Internal | 3/8"-16 | 1 1/4" | 3 1/16" | 7 1/16" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | __ | Internal | 1/2"-13 | 2" | 4 9/32" | 12 21/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 16,000 | 3 3/8" | 2 1/4" | 3" | Round | 1" | __ | Internal | 5/8"-11 | 2" | 4 27/32" | 11 5/32" | Plain | 0000000 | 000000 | 000000 | 00 |
Push/Pull—316 Stainless Steel | ||||||||||||||||
| 800 | 1 1/4" | 1" | 1 1/4" | Round | 1/2" | __ | Internal | 5/16"-18 | 1" | 3 9/32" | 4 11/16" | Cushion | 0000000 | 00000 | 00000000 | 0000 |
Clamps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plunger | When Clamped | Replacement Handle Grips | |||||||||||||
| Holding Cap., lbs. | Lg. | Ht. | Travel | Shape | Dia. | Threading | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Grip Style | Each | Each | ||
Push/Pull—Steel | |||||||||||||||
| 300 | 1 15/16" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 9/32" | 5 15/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 550 | 1 1/8" | 5/16" | 1" | Round | 13/32" | Internal | M6 | 25 mm | 2 3/32" | 4 1/8" | Plain | 0000000 | 000000 | 000000 | 00 |
| 600 | 1 5/8" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 7/16" | 4 25/32" | Cushion | 0000000 | 00000 | 00000000 | 00000 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Round | 1/2" | Internal | M8 | 25 mm | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 1 15/16" | 1 11/16" | 1 5/8" | Round | 5/8" | Internal | M10 | 32 mm | 4 13/32" | 6 23/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 850 | 1 9/16" | 1 1/4" | 1 5/8" | Round | 5/8" | Internal | M10 | 32 mm | 4 1/32" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 1,100 | 1 9/16" | 13/32" | 1 1/2" | Round | 9/16" | Internal | M8 | 35 mm | 3 1/32" | 5 7/8" | Plain | 0000000 | 000000 | 000000 | 00 |
| 1,650 | 2" | 9/16" | 2" | Round | 3/4" | Internal | M12 | 55 mm | 3 1/32" | 7 15/32" | Plain | 0000000 | 000000 | 000000 | 00 |
| 3,960 | 2 7/16" | 5/8" | 2 3/8" | Round | 7/8" | Internal | M12 | 65 mm | 3 11/16" | 9 1/32" | Plain | 0000000 | 000000 | 000000 | 00 |
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | M12 | 51 mm | 4 9/32" | 12 21/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 16,000 | 3 3/8" | 2 1/4" | 3" | Round | 1" | Internal | M16 | 51 mm | 4 27/32" | 11 5/32" | Plain | 0000000 | 000000 | 000000 | 00 |
Push/Pull—18-8 Stainless Steel | |||||||||||||||
| 800 | 1 1/4" | 1" | 1 1/4" | Round | 1/2" | Internal | M8 | 25 mm | 3 9/32" | 4 11/16" | Cushion | 0000000 | 00000 | 00000000 | 0000 |
Compact Push/Pull Toggle Clamps
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. A pushing or pulling motion holds workpieces from the side. Clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Clamps with internally threaded plunger accommodate threaded holding screws and other threaded fixtures (not included).
Clamps with externally threaded plunger can be threaded into a fixture with a tapped hole.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 550 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 600 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Externally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Externally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | M4 | 12 mm | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
Internally Threaded Plunger—316 Stainless Steel | ||||||||||
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Covered Push/Pull Toggle Clamps
Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 800 | 2" | 7/8" | 1 1/4" | 3/8" | 1/4"-20 | 1/2" | 2 1/2" | 6 1/4" | Steel | 0000000 | 000000 |
Hole-Mount Push/Pull Toggle Clamps
Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 450 | 2 1/4" | 1 1/2" | 1/2" | 5/16"-18 | 1" | 4 1/4" | 5 5/8" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | 3/8"-16 | 1 1/4" | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | 3/8"-16 | 1 1/4" | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 400 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Hole-Mount Push/Pull Toggle Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Panel mount these clamps through a hole with the included nut, or drill and tap a hole to flush mount. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Includes | Each | |
Push/Pull | |||||||||||
| 450 | 1 1/2" | 1 1/2" | 1/2" | 5/16"-18 | 1 3/8" | 4 3/16" | 5 1/2" | Steel | Mounting Nut | 0000000 | 0000000 |
Rail-Mount Push/Pull Toggle Clamps
Mount these clamps to a rail or bar. A pushing or pulling motion holds workpieces from the side. Clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 250 | 1 5/16" | 1 1/8" | 3/4" | 5/16" | 10-24 | 1/2" | 2 13/16" | 3 3/4" | Steel | 0000000 | 000000 |
| 500 | 1 9/16" | 1 7/16" | 1" | 5/16" | 10-24 | 1/2" | 3 15/16" | 4 3/4" | Steel | 0000000 | 00000 |
| 1,000 | 2 7/8" | 1 15/16" | 1 5/8" | 1/2" | 5/16"-18 | 1" | 5" | 7 13/16" | Steel | 0000000 | 00000 |
Adjustable-Travel Push/Pull Clamps
The plunger can be secured at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. These clamps have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 2,000 | 7 7/8" | 1 3/16" | 7 7/8" | 5/8" | M8 | 15 mm | 6 3/8" | 15" | Steel | 0000000 | 0000000 |
Hole-Mount Adjustable-Travel Push/Pull Clamps
Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 600 | 7 7/8" | 7/8" | 7 7/8" | 1/2" | M6 | 12 mm | 5 1/8" | 13" | Steel | 0000000 | 0000000 |
Holding Screws for Toggle Clamps
Fixed
Flat Tip
Fixed
Cone Tip
Swiveling
Flat Tip
Fixed
Flat Tip
Swiveling
Flat Tip
Steel Fixed
Flat Tip
Replace worn screws or customize your clamps.
For technical drawings and 3-D models, click on a part number.
Holding Screws | Steel | Stainless Steel | |||||
|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Tip Dia. | Overall Lg. | Each | Each | ||
With Rubber Fixed Flat Tip | |||||||
| 8-32 | 3/4" | 9/16" | 1" | 0000000 | 00000 | 0000000 | 00000 |
| 8-32 | 1" | 9/16" | 1 1/4" | 0000000 | 0000 | 000000 | 00 |
| 10-32 | 1" | 9/16" | 1 3/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 5/8" | 11/16" | 1" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 1/8" | 5/8" | 1 5/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 1 1/8" | 11/16" | 1 1/2" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 5/8" | 5/8" | 2 1/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 1 3/4" | 19/32" | 1 29/32" | 000000 | 00 | 0000000 | 00000 |
| 5/16"-18 | 1 5/8" | 13/16" | 2 1/4" | 0000000 | 0000 | 0000000 | 0000 |
| 5/16"-18 | 2 3/8" | 13/16" | 3" | 0000000 | 0000 | 0000000 | 0000 |
| 3/8"-16 | 2 3/8" | 1" | 3 1/4" | 0000000 | 0000 | 0000000 | 00000 |
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 4 7/8" | 1" | 5 3/4" | 0000000 | 0000 | 000000 | 00 |
| 1/2"-13 | 2 3/4" | 1 3/16" | 3 7/8" | 0000000 | 0000 | 000000 | 00 |
| 5/8"-11 | 3 5/8" | 1 3/8" | 5" | 0000000 | 00000 | 000000 | 00 |
| M4 | 13/16" | 5/16" | 7/8" | 0000000 | 0000 | 000000 | 00 |
| M4 | 1 3/16" | 5/16" | 1 1/4" | 0000000 | 0000 | 000000 | 00 |
| M5 | 1" | 3/8" | 1 1/8" | 0000000 | 0000 | 000000 | 00 |
| M5 | 1 3/8" | 3/8" | 1 9/16" | 0000000 | 0000 | 000000 | 00 |
| M6 | 5/8" | 11/16" | 1" | 0000000 | 0000 | 000000 | 00 |
| M6 | 1 3/16" | 5/8" | 1 3/4" | 0000000 | 0000 | 000000 | 00 |
| M6 | 1 5/8" | 5/8" | 2 1/8" | 0000000 | 0000 | 000000 | 00 |
| M8 | 1 3/8" | 13/16" | 2 1/8" | 0000000 | 0000 | 000000 | 00 |
| M8 | 1 3/4" | 7/8" | 2 1/2" | 0000000 | 0000 | 000000 | 00 |
| M8 | 2 5/8" | 13/16" | 3 3/8" | 0000000 | 0000 | 000000 | 00 |
| M10 | 2 3/16" | 1" | 3 1/8" | 0000000 | 0000 | 000000 | 00 |
| M10 | 3 3/4" | 1" | 4 3/4" | 0000000 | 0000 | 000000 | 00 |
| M12 | 2 7/8" | 1 3/16" | 4 1/8" | 0000000 | 00000 | 000000 | 00 |
With Rubber Fixed Cone Tip | |||||||
| 10-32 | 1" | 9/16" | 1 1/2" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 5/8" | 3/4" | 2 1/4" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 2 3/8" | 3/4" | 3" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 4 3/4" | 3/4" | 5 1/2" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 0000000 | 0000 | 000000 | 00 |
With Rubber Swiveling Flat Tip | |||||||
| 1/4"-20 | 1 5/8" | 1" | 2 5/8" | 0000000 | 00000 | 000000 | 00 |
| 5/16"-18 | 2" | 1 1/2" | 3" | 0000000 | 00000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 2" | 3 5/8" | 0000000 | 00000 | 000000 | 00 |
With Steel Fixed Flat Tip | |||||||
| 8-32 | 1" | 1/4" | 1 3/32" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 1 3/4" | 1/2" | 2" | 00000000 | 0000 | 000000 | 00 |
With Steel Swiveling Flat Tip | |||||||
| 1/4"-20 | 1 5/8" | 1/2" | 2 1/2" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 2" | 9/16" | 2 3/4" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2" | 5/8" | 3 1/8" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 5/8" | 3 3/8" | 0000000 | 0000 | 000000 | 00 |
| 1/2"-13 | 3 1/2" | 1" | 4 5/8" | 0000000 | 00000 | 000000 | 00 |
With Stainless Steel Fixed Flat Tip | |||||||
| 10-32 | 1" | 5/16" | 1 1/8" | 000000 | 00 | 0000000 | 0000 |
| M4 | 13/16" | 5/16" | 29/32" | 000000 | 00 | 00000000 | 0000 |