Mount Type Mount Type |
|---|
 |  |
| Threaded Hole | Threaded Stud |
 | |
| Unthreaded Stud |
Handle Length Handle Length |
|---|
|
|
|
Stud Material Stud Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Finish Finish |
|---|
|
Handle/Knob Type Handle/Knob Type | Show |
|---|
|
Handle/Knob Type Handle/Knob Type | Hide |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Insert Material Insert Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
Tapered Lever Handles
Use these handles as grips on hand wheels and cranks to operate machinery.
Threaded-stud handles mount into a threaded hole.
Threaded-hole handles install on a threaded stud.
Ribbed handles are easier to grip than smooth handles when wearing gloves or your hands are dirty.
Plastic handles are a lightweight alternative to metal. They all resist oil, grease, and solvents. Phenolic has good scratch resistance. Polypropylene has good impact resistance.
For technical drawings and 3-D models, click on a part number.
-1607697253-p9@halfx_637432724644783048.png?ver=imagenotfound)
Thread | Dia. | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Stud Lg. | Handle Lg. | (A) | (B) | Stud Material | Temp. Range, °F | 1-9 | 10-Up | |
Black Phenolic Plastic | ||||||||||
5/16"-18 | __ | 1/2" | 3 7/8" | 1" | 5/8" | Steel | -30° to 400° | 00000000 | 00000 | 00000 |
| 3/8"-16 | __ | 1/2" | 3 7/8" | 1" | 5/8" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| M5 | 0.8 | 7mm | 50mm | 15mm | 11mm | Steel | 230° | 0000000 | 0000 | 0000 |
| M6 | 1 | 10mm | 72mm | 21mm | 15mm | Steel | 230° | 0000000 | 0000 | 0000 |
| M8 | 1.25 | 10mm | 90mm | 25mm | 17mm | Steel | 230° | 0000000 | 0000 | 0000 |
| M10 | 1.5 | 12mm | 100mm | 26mm | 20mm | Steel | 230° | 0000000 | 0000 | 0000 |
| M12 | 1.75 | 14mm | 124mm | 33mm | 25mm | Steel | 230° | 0000000 | 00000 | 00000 |
Dia. | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Stud Lg. | Handle Lg. | (A) | (B) | Stud Material | Temp. Range, °F | 1-9 | 10-Up | |
Black Phenolic Plastic | |||||||||
| 1/4"-20 | 3/8" | 3 7/8" | 1 1/8" | 3/4" | Steel | -30° to 400° | 00000000 | 00000 | 00000 |
| 5/16"-18 | 3/8" | 3 7/8" | 1 1/8" | 3/4" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 1/2" | 3 7/8" | 1 1/8" | 3/4" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 3/4" | 4 15/16" | 1 3/8" | 1" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
--263ad7128161610655044-p9@halfx_637462302512265131.png?ver=imagenotfound)
Thread | Dia. | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dp. | Handle Lg. | (A) | (B) | Insert Material | Temp. Range, °F | 1-9 | 10-Up | |
Black Phenolic Plastic | ||||||||||
| 1/4"-20 | __ | 3/8" | 2 5/8" | 7/8" | 5/8" | Brass | -30° to 400° | 00000000 | 00000 | 00000 |
| 5/16"-18 | __ | 3/4" | 2 5/8" | 7/8" | 5/8" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 5/8" | 3 7/8" | 1" | 5/8" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-24 | __ | 5/8" | 3 7/8" | 1" | 5/8" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 2" | 3 7/8" | 1" | 5/8" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-24 | __ | 2" | 3 7/8" | 1" | 5/8" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| M5 | 0.8 | 14mm | 27mm | 13mm | 11mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M6 | 1 | 25mm | 50mm | 21mm | 17mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M8 | 1.25 | 25mm | 50mm | 21mm | 17mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M8 | 1.25 | 30mm | 65mm | 25mm | 20mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M10 | 1.5 | 30mm | 65mm | 25mm | 20mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M12 | 1.75 | 30mm | 65mm | 25mm | 20mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
| M12 | 1.75 | 40mm | 112mm | 29mm | 22mm | __ | 0° to 300° | 0000000 | 0000 | 0000 |
Thread | Dia. | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Handle Lg. | (A) | (B) | Insert Material | Temp. Range, °F | 1-9 | 10-Up | |
Black Phenolic Plastic | |||||||||
| 1/4"-20 | 1/2" | 3" | 1 1/8" | 5/8" | Brass | -30° to 400° | 00000000 | 00000 | 00000 |
| 1/4"-20 | 1/2" | 3 7/8" | 1 1/8" | 3/4" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 3/4" | 4 15/16" | 1 3/8" | 1" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/2"-13 | 1" | 4 15/16" | 1 3/8" | 1" | Brass | -30° to 400° | 00000000 | 0000 | 0000 |
Black Polypropylene Plastic | |||||||||
| 1/4"-20 | 1/2" | 2 5/8" | 7/8" | 5/8" | Brass | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 1/2" | 2 5/8" | 7/8" | 5/8" | Brass | -15° to 125° | 00000000 | 0000 | 0000 |
Miniature Tapered Lever Handles
Also known as finger handles, these are less than 1" long. Use them as tiny grips on small hand wheels and cranks to operate machinery. All of these handles are made of steel and have a black-oxide finish for mild rust resistance. Mount them into a threaded hole.
For technical drawings and 3-D models, click on a part number.
Metal-Detectable Tapered Lever Handles
These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. They contain metal additives that will set off metal detectors if they—or any piece of them—fall into your line. They’re also bright blue, making them easy to spot. These handles help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety. They’re also FDA compliant for direct contact with food.
Made of nylon, these handles resist wear and repel oil, grease, and solvents. Install them on a threaded stud.
For technical drawings and 3-D models, click on a part number.
Thread | Dia., mm | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dp., mm | Handle Lg., mm | (A) | (B) | Temp. Range, °F | Specifications Met | Each | |
Threaded Hole | |||||||||
Blue Nylon Plastic | |||||||||
| M10 | 1.5 | 55 | 80 | 26 | 21 | -20° to 110° | FDA Compliant 21 CFR 177.1500, FDA Compliant 21 CFR 178.3297 | 0000000 | 00000 |
Push-On Tapered Lever Handles
Press fit one of these fixed handles into a shaft or rod to operate machinery.
For technical drawings and 3-D models, click on a part number.
Stud | Each | |||||
|---|---|---|---|---|---|---|
| Dia. | Lg. | Handle Lg. | Dia. | 1-9 | 10-Up | |
Unthreaded Stud with Stationary Handle | ||||||
Steel | ||||||
| 1/4" | 7/16" | 1 5/16" | 7/16" | 0000000 | 000000 | 000000 |
| 1/4" | 7/16" | 1 1/2" | 5/8" | 0000000 | 00000 | 00000 |
| 5/16" | 7/16" | 1 3/4" | 3/4" | 0000000 | 00000 | 00000 |
| 3/8" | 9/16" | 2 1/8" | 7/8" | 0000000 | 00000 | 00000 |
| 7/16" | 11/16" | 2 3/4" | 1 1/8" | 0000000 | 00000 | 00000 |
| 7/16" | 11/16" | 3 1/4" | 1 3/16" | 0000000 | 00000 | 00000 |
| 1/2" | 15/16" | 4 1/16" | 1 3/8" | 0000000 | 00000 | 00000 |
| 5/8" | 1 3/16" | 4 9/16" | 1 1/2" | 0000000 | 00000 | 00000 |