Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

These handles are often used for operating machinery.

Whether you're looking for a stopgap or permanent replacement, these valve handles adjust to fit a range of valve and faucet stem widths.

Round long shafts can pass through these handles for mounting versatility. Create custom threads or drill a hole in the side of the hub to secure with a set screw. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Push or pull the plunger to hold your workpiece from the side.

Smaller than standard push toggle clamps, these are often used for electronics and small fixturing applications.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

Moving parts are sealed to prevent dirt and dust from clogging the clamp.

Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Hold workpieces of different thicknesses without adjustment.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Two sets of mounting holes allow mounting on the bottom or side.

These clamps have mounting holes on the bottom.

Fit the draw arm over a latch plate and pull the handle to clamp.

Push the lever to lock the handle and prevent accidental opening.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

A safety catch prevents accidental opening.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

These latches have a safety catch to prevent accidental opening.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.