Lift Table Bellows
Also known as lift table skirts, these bellows cover the working parts at the base of a lift table. In addition to keeping damaging debris out, they protect workers from pinch points in the moving parts. All of these bellows have frames for stability. They can be attached to lift tables with fasteners (not included).
| Lg. | Wd. | Ht. | Material | Material Thick. | Frame Material | Each | |
Protects Against Debris, Metal Chips, Wood Chips | |||||||
|---|---|---|---|---|---|---|---|
| 25" | 12" | 4"-30" | PVC Fabric | 0.21" | Aluminum | 0000000 | 0000000 |
| 42" | 18" | 5"-42" | PVC Fabric | 0.21" | Aluminum | 0000000 | 00000000 |
| 48" | 48" | 4"-32" | PVC Fabric | 0.21" | Aluminum | 0000000 | 00000000 |
| 48" | 48" | 5"-43 3/4" | PVC Fabric | 0.21" | Aluminum | 0000000 | 00000000 |
| 96" | 48" | 5"-42 1/2" | PVC Fabric | 0.21" | Aluminum | 0000000 | 00000000 |
| 96" | 48" | 5"-44" | PVC Fabric | 0.21" | Aluminum | 0000000 | 00000000 |
Electric Stationary Lift Tables
An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Hand-Operated with 115V AC Internal Motor | |||||||||||||||||
| 2,000 | 53" | 31" | 8 1/2"-38 1/2" | 2 1/2 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
| 2,000 | 53" | 40" | 8 1/2"-39 1/2" | 2 1/2 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 59" | 40" | 9 1/2"-48" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Hand-Operated with 120V AC External Motor | |||||||||||||||||
| 550 | 32" | 19 1/2" | 6"-28" | 2 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 3 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 25 1/2" | 18" | 8 1/2"-33 1/2" | 1 3/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,650 | 40" | 20" | 6"-31 1/2" | 1 1/2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Hand-Operated with 480V AC Internal Motor | |||||||||||||||||
| 3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Foot-Operated with 115V AC Internal Motor | |||||||||||||||||
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 59" | 40" | 9 1/2"-48" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 00000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 00000000 | 00000000 |
Foot-Operated with 480V AC Internal Motor | |||||||||||||||||
| 3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Turntable-Top Electric Stationary Lift Tables
The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Round with 115V AC Motor | |||||||||||||||
| 2,000 | 11 1/2"-41 1/2" | 2 1/2 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
| 4,000 | 11 1/2"-41 1/2" | 1 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated Stationary Lift Tables
Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Specifications Met | Each | Each | ||
| 440 | 25 1/2" | 19 1/2" | 5"-21" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 550 | 32" | 19 1/2" | 5"-28" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 3/4" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 1/2" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,650 | 40" | 20" | 6"-31 1/2" | 3/8" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Air-Powered Stationary Lift Tables
Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Elevation Speed, in./sec. | Hose Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
| 550 | 32" | 19 1/2" | 6"-28" | 13 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 10 | Steel | 40 | 1/4 | NPT | Female | 3/4 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 10 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Motor-Driven Battery-Powered Lift Tables
Powered for driving and lifting, these tables take the effort out of positioning heavy loads. The powered drive makes them ideal for moving loads long distances in your facility. A throttle controls forward and reverse movement, while a battery-powered hydraulic pump raises and lowers loads with the push of a button. Adjust the speed to match the pace of your task. Compared to manual lift trucks, these tables offer greater control and more precise adjustments.
Top to bottom, these tables are outfitted with safety features. When they back up, a beeper sounds to alert people nearby. An emergency stop button immediately halts movement. If you release the control or the table is stationary, an automatic brake engages to prevent unintended movement on inclines or uneven surfaces.
The front casters are pneumatic and shock absorbent, while the rear wheels are made of polyurethane and resist abrasion. All wheels are nonmarking. These tables come with a charging cord—just plug it into a standard wall outlet.
Wheel | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | For Max. Incline | Duty Cycle | Batteries Included | Tabletop Ga. | Material | Handle Ht. | Wheel Configuration | Dia. | Material | Type | Features | Each | |
| 1,000 | 43" | 23" | 18 1/2"-64" | 8 | 8° | 15 cycles per hour | Yes | 10 | Painted Steel | 38" | Two Swivel Casters and Two Axle-Mounted Wheels | 10 1/2" (Front) 5 3/4" (Rear) | Rubber (Front) Polyurethane Rubber (Rear) | Pneumatic (Front) Tread on Core (Rear) | Emergency Stop | 00000000 | 000000000 |