Slings are reinforced for additional abrasion resistance.

Slings have plastic-coated fibers woven into the edges for added abrasion resistance.

Slings are reinforced for additional abrasion resistance.

Securely hook these slings to a load that has lifting eyes.

Slings have plastic-coated fibers woven into the edges for added abrasion resistance.

Adjust the chain length and number of legs without changing slings.

Grab hooks can securely hold onto a single link of chain to shorten a leg or create loops.

These slings attach quickly and securely to loads with lift attachments.

Also known as Type 5 and endless slings, these slings last longer than slings with eyes because they can be rotated to change the load-bearing point.

Made of abrasion- and chemical-resistant Dyneema, these slings are a lightweight alternative to wire rope slings.

Made of galvanized steel mesh to be more cut and abrasion resistant than web or round slings, yet maintain the flexibility to conform to a load.

Made of lightweight fiberglass these beams are also nonconductive and will not corrode.

Pads on these clamps prevent the grip from biting into the load.

Pads on these clamps prevent the grip from biting into the load.

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Use with overhead lifting equipment to vertically lift closed-head drums and open-head drums with tightly secured lids.

Hook the loops of a bulk bag onto the legs of these lifters to maintain support while a forklift raises the bag.

These tongs firmly grab flat and tapered beams.

These magnets hold a load until you pull the handle and pry the magnet off.

These hooks have a pivoting tip to lift and move bulky, hard-to-maneuver coils of wire from a horizontal to a vertical position.

Mount these jacks to equipment to raise and level it.

These jacks can be used to lift, spread, push, pull, and clamp.

Wrench-adjustable jacks require less clearance to turn than bar-adjustable jacks.

Pump the handle by hand to raise the jack. Turn the release valve to lower the load.

Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.

With fewer moving parts than standard bottle jacks, these are made for frequent use.

These jacks include extensions for increasing lift height and accessories for prying.

As versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.

Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.

With no legs in front, these cranes let you lift close to your load. They are also known as engine cranes, and have a hydraulic hand pump that raises and lowers the arm (boom) to lift items without the need for a hoist.

Adjust the vertical clearance and horizontal span to suit your needs.

These cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

These cranes are half the weight of other hand-winch cranes with similar capacity and can be lifted from their base for easy transport. They're also known as davit cranes. Use them to lift objects out of holes such as sewers.

Designed to save valuable floor space, these cranes mount to structural columns.

Able to cover a larger work area than rotating cranes, these allow you to position your load anywhere inside the four posts.

Also known as end trucks, use these trolleys with your own beams to create a crane.

These hoists are small and lightweight so you can easily move them between jobs.

These hoists are rated for environments where hazardous material is present. Use the handheld control to effortlessly lift your load.

Adjust lifting speed with the handheld control. Lower speeds allow precise positioning; high speeds are for quick lifting.

Stainless steel chain and hooks reduce corrosion and prevent contamination.

Hoists come mounted to a trolley for a stable ride on your beam. Use the handheld control to effortlessly lift your load.

These hoists are quieter and more stable than electric chain hoists.

The body spins 360° so you can operate these hoists from any direction.

These hoists have a zinc-flake coated steel body, stainless steel chain, and copper-coated steel hooks for spark resistance.

These hoists have large gears to lift faster with each pull than standard trolley-mount hand chain hoists. Good for frequent lifting operations where user fatigue is a concern.

These hoists come with fibrous rope that is lighter in weight and easier to handle than chain.

These hoists are small enough to fit in your toolbox and can be used in tight spaces. They have a thick, rugged frame for long life, as well as enclosed gears to protect from debris and contamination for smooth operation.

Use the ratcheting lever to lift and position your load, and the brake will securely hold it in place.

Fit these trolleys to your beam by turning a threaded rod or knob to adjust width—there's no need to disassemble the trolley for installation. Use them to transport hook-mount hoists along a beam.

These trolleys have a rugged construction for long life.

Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate. These hoists are small and lightweight so you can easily move them between jobs.

These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance.

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.