A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas.

Style A lights are compatible with medium-base, screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They have a plastic-coated steel guard to protect the bulb.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

These LED lights are rated for environments where hazardous material is present. They have a tempered glass lens to protect the bulb.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Among the brightest floodlights we offer, these have a height-adjustable stand and swiveling heads to direct the light exactly where it's needed. All are furnished with halogen bulbs and steel guards that protect the glass lenses.

Style A has a removeable head, so you can bring light into areas where the stand won't fit. It casts a cool light that highlights white/blue tones, which is good for inspecting.

Style B has wheels, so you can roll this floodlight into position at your job site. It casts a warm, yellow-toned light that is similar to incandescent light.

These lights are sealed to protect against splashing water. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed. The light heads are detachable, so you can bring light into areas where the stand won't fit. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. All have impact-resistant plastic lenses to protect the LEDs.

For use in dry environments, this easy-to-carry light is small but bright. Adjust the head up and down to flood your job site with light. With a halogen bulb, this floodlight casts a cool light that highlights white/blue tones, which is good for inspecting. It has a steel guard to protect its durable glass lens from accidental contact. This light cannot be sold to California due to local energy efficiency requirements.

Lenses disperse light to reduce glare and protect bulbs from damage. Cut to size using a band saw or shears.

Solid lenses keep bulbs hidden and distribute light evenly. Lenses with a prismatic or cracked ice pattern distribute light better than smooth lenses. Smooth lenses for LED lights scatter the directed light of an LED better than other solid lenses.

Egg crate and parabolic lenses have an open construction to allow more light through than solid lenses as well as more air circulation to cool bulbs. Parabolic lenses are reflective to direct light downward, which reduces glare.

Polystyrene lenses are the most economical, but they may yellow over time. Acrylic lenses won't turn yellow over time. Polycarbonate lenses are more impact-resistant than acrylic lenses, but they may yellow over time. Aluminum lenses withstand higher temperatures than plastic lenses.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED, CFL, halogen, and incandescent bulbs (sold separately), while others accept fewer kinds.

Styles 1, 3, 5, 7, and 8 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 2, 4, and 6 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

These lights swing out from the wall to illuminate loading docks and trailers. They have a steel arm, plastic lens, and switch. All have a cord with three-prong plug and operate on 120 volts AC. Lights have four mounting holes (hardware not included, except Style F includes hardware). Color is yellow, except Style E are black and yellow.

Styles A-D are compatible with medium-base CFL (compact fluorescent), halogen, and incandescent bulbs (sold separately). Some also work with LED bulbs. All have a zinc-plated steel guard to protect the lens.

Style E lights come with a halogen bulb that casts a warm, yellow-tone light, which is similar in appearance to incandescent bulbs. They come with a steel guard to protect the lens.

Lights that cannot be sold to California are restricted by local energy efficiency requirements.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.

A sealed head and switch keeps these lights shining in wet environments. They withstand dripping, splashing, and falling liquid. These lights swing out from the wall and adjust horizontally and vertically to illuminate loading docks and trailers. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Retain glass when tubular bulbs break; these guards have a solid lens.

Guards for recessed double contact bulbs have a heat sink screen that distributes heat build-up.

A solid lens protects screw-in bulbs and retains glass if the bulb breaks.

Bulb shape numbers starting with A are standard-household bulbs, B are cone-shaped, G are globe-shaped, S are tapered, and T are tubular shaped bulbs.