13 Products

These bulbs lock into GU24 light sockets with a twist. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

CFL (compact fluorescent) bulbs are energy efficient, but take several seconds to reach full brightness. They cannot be sold to Canada because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).

Often used in recessed can fixtures and track lighting, these bulbs produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

BR and R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

PAR bulbs have narrow beam angles that provide more focused beams of light than other floodlights. A short length allows them to fit in small can fixtures without protruding.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. Plastic LED bulbs are shatterproof. Bulbs that cannot be sold to the listed regions do not meet mercury and/or energy efficiency regulations.