Use this bulb in ovens and equipment that reaches temperatures up to 500° F. It has a 1 1/16" dia. base and fits standard household light sockets. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Pins on the base lock these bulbs into sockets to withstand vibration. They're often used in machines and elevators. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Often used in recessed can fixtures and track lighting, these bulbs produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

BR and R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

PAR bulbs have narrow beam angles that provide more focused beams of light than other floodlights. A short length allows them to fit in small can fixtures without protruding.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. Plastic LED bulbs are shatterproof.

CFL (compact fluorescent) bulbs are more energy efficient and last longer than halogen bulbs. It takes several seconds for them to reach full brightness. They contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

These bulbs produce a narrower, more concentrated beam of light than floodlight bulbs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

BR and R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

Incandescent bulbs are traditional light bulbs. Many have been phased out due to governmental energy requirements, but some are still available for special applications.

Bulbs that cannot be sold to the listed regions do not meet energy efficiency requirements.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than fluorescent bulbs. They generate little heat and withstand vibration. Plastic bulbs are shatterproof. Socket-ready bulbs work with most instant-start electronic ballasts, but not all. For a full list of compatible ballasts select a part number and view product detail. Ballast bypass bulbs eliminate the need for a ballast so the socket must be wired directly to the power source.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

Bulbs that cannot be sold to the regions listed exceed local regulatory limits on mercury and/or do not meet local efficiency standards.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb.