Replace worn sockets in light fixtures. These sockets work with plug-in compact fluorescent and LED bulbs.

Push snap-on sockets onto fixture panels that are 0.023” to 0.039” thick.

Fastener-mount sockets provide more holding power than snap-on sockets so they withstand vibration better.

Hardwire these sockets to a power source.

For technical drawings and 3-D models, click on a part number.

Stop vibration from shaking tubular fluorescent and LED bulbs loose.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C come with an LED bulb; however, are also compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and infrared bulbs.

Style D are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, infrared, and LED bulbs (sold separately).

Lights that cannot be sold to California do not meet local energy efficiency requirements.

For technical drawings and 3-D models, click on a part number.

The gooseneck arm on this light allows you to direct light exactly where it's needed. It has a reflector that distributes light more evenly than other portable lights. A mounting clip at the base lets you attach it to a nearby surface. This light comes with a CFL (compact fluorescent) bulb; it is also compatible with medium-base, screw-in halogen, incandescent, and LED bulbs (sold separately). It cannot be sold to the regions listed due to local energy efficiency requirements and limits on mercury content.

For technical drawings and 3-D models, click on a part number.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.

Install sockets for medium (standard household) screw-in base light bulbs.

Styles A-C mount to outlet boxes.

Attach these lights in one of the quick-clamp ports for a clear view of what's inside tanks, filters, and other closed containers used in brewery, pharmaceutical, and food-processing lines. Made with a 316 stainless steel body that is IP65 and NEMA 4X rated, they seal out dirt and dust, and won't corrode from frequent rinsing with harsh cleaners and sanitizers. With rounded edges, polished surfaces, and a fused lens, there aren’t any crevices for water and bacteria to hide in, so you can leave them mounted to machinery during cleaning. The lens doesn’t contain Bisphenol A (BPA), Bisphenol B (BPB), or BPA derivates (BPX), which are chemicals that could contaminate food and beverage applications. These lights also meet ASME BPE, which is a design standard for bioprocessing equipment that helps ensure purity and safety.

You’ll need to make sure your tank has at least two ports, since these lights require their own port. They mount to the port using quick-clamp clamps (not included), while leaving the other port for viewing. Mounting the light this way makes it easy to install and remove for cleaning.

With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Their cool light appearance is good for viewing the contents of stainless steel containers, such as brew kettles and bioreactors. The narrow 25° beam angle concentrates light output through the lens and into the tank. Made of plastic, the lens resists shattering, high temperatures, corrosion, and chemicals. It’s reinforced around the edge with 304 stainless steel, so it won’t chip, crack, and break from the pressure of the quick-clamp fitting. Attach the lens to the body using the included set screws.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

Mount these lights on a pole to illuminate pedestrian areas such as streets and walkways. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light. All include hardware for mounting to poles with 1 5/8" and 2 3/8" OD.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration. Attach them to your workspace for additional lighting. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a neutral light appearance cast a white light that is consistent with those often found in workspaces. Lights with a cool or daylight appearance highlight white/blue tones, which is good for inspecting.

For technical drawings and 3-D models, click on a part number.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.