Fine-tune motion-sensing light controls from your smartphone or tablet. Mounting on the ceiling gives these light controls a clearer view of the room than wall-mount sensors, so they switch reliably.

Customize motion-sensing light controls from your smartphone or tablet.

Detect motion near your light fixture to turn lights on and off. Compared to switch-mount motion controls that detect from a single wall, these controls have a better view of the entire space since they sense motion from above.

Monitor passersby and trespassers with light and an alert. For facility security, these light controls notify you on a smartphone app when they sense motion and turn on.

Screw these controls into a light bulb socket.

Rated NEMA 4X and IP66 for use in washdown environments, these controls have an actuator that’s sealed to keep water out. They turn lights on when they detect motion and off when a room is empty or there’s enough daylight.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Your standard light switches—these switches stick out of your mounting surface and flip on and off.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. They're also known as three-way and four-way switches.

Control lights by transmitting a wireless signal from these switches to a control relay on your fixture.

Switch lights on and off no matter the forecast.

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off.

Install these switches inline on a lamp cord.

Flat and completely smooth, these switches are easy to wipe down. With just a light tap, you can switch lights on and off, even if you’re wearing gloves.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control the brightness of lights on the same circuit. They're also known as three-way switches.

For precise control of high-current equipment such as landscape lighting, pumps, and heaters, these switches schedule on/off times to the exact minute.

Program these switches to turn a device on and off at a set time and day.

Mount these switches to a flat surface or attach to DIN rail.

Install these switches in a panel cutout.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

Mount these switches to a flat surface or attach to DIN rail.

Control equipment with high currents such as air conditioners, heaters, and ventilation fans.

Push and release the button to activate—no electricity required.

Automatically turn electrical equipment on or off after a set interval.

Light beams travel up to 32 ft. between the transmitter and receiver.

Detect irregularly shaped items with a band of light up to 10 times larger than the beam on a standard photoelectric switch.

With a narrow, flat body, these switches fit in tight spaces.

Safely detect the presence or absence of an object moving at high speeds with a light beam. These switches produce a low-current, low-voltage NAMUR signal, so they won’t create sparks or ignite. ATEX and IECEx certified, they protect against explosion in environments containing flammable gases and combustible dust.

A slim design and a light beam that’s angled upwards allow these switches to sense objects from between conveyor rollers.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

Set these switches to delay activation by up to five seconds after detecting an object.

Monitor the color of products as they pass by on your line. These transmitters don’t just detect if color is in mint condition—they also turn equipment on or off, all with a single device.

Vary electrical flow to control speed, volume, and light intensity. Also known as variable output switches.

Rated NEMA 13, these potentiometers protect against debris and splashing oil and coolant.

Control and diagnose issues with safety-critical circuits.

These boxes come ready to use with receptacles installed.