Fine-tune the size of the laser dot. This laser is sized for mounting on machinery to ensure tools are properly positioned. You can also use it in conjunction with machine-vision cameras to serve as a reference location for making measurements. It has wire leads for connecting to a DC power source (sold separately). Laser light is red and is best viewed indoors.

Mount this laser into a chuck on your milling machine or drill press to precisely indicate the drilling point. The laser projects a red dot and is best viewed indoors.

With a sealed lens and an IP67 rating, these lasers are dust and liquid tight, so you can mount them to machines in dusty or wet areas such as labs, warehouses, or marine environments to align components.

Red lasers are best for indoor environments because they’re dimmer than green lasers.

Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away.

Position these lasers at the correct angle for your job with adjustable angle mounts. They allow 360° rotation.

Use magnetic mounts to attach these lasers to machines and other steel surfaces instead of drilling holes and bolting them. They hold lasers at a fixed angle, but you can combine them with adjustable angle mounts for 360° rotation.

Check for proper alignment of pulley systems with these magnetic-mount lasers. Place them on pulleys, gears, or sprockets made of ferrous metals, such as steel.

Red lasers are best for indoor environments, since they’re dimmer than green lasers.

Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.

Position these lasers directly on a flat surface. Lasers project a red dot that is best viewed indoors. Twist the knob to focus the dot so it is more precise at short distances.

Set these lasers on any surface, and they'll level themselves within about 4°. Whether you're hanging a drop ceiling or aligning bench tops, your installation will be at the right height. Laser lights are best viewed indoors. Lasers can be mounted to a tripod.

Whether you’re hanging a drop ceiling or aligning bench tops, use the cross-hair lines of these lasers to install material at the right height. Placed on any surface, they adjust themselves within a few degrees of level.

Red lasers are best viewed indoors because they’re dimmer than green lasers. They come with a tripod to position them up to 46" high.

Green lasers appear up to four times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away. Add a tripod to adjust the height of these lasers between 16" and 51".

Set these lasers on any surface, and they will level themselves within about 4°. The laser projects 360° around the base to show the level line. Whether you're hanging a drop ceiling or aligning bench tops, your installation will be at the right height. Mount them to a tripod (not included) to level at a greater range of heights.

Red lasers are best viewed indoors. They include a laser detector, which indicates the height of the laser’s beam when you can’t see it, such as in bright lighting or at long distances.

Green lasers are four times brighter than red lasers, so you can see the beam outdoors and in bright lighting. They’re also easier to spot from far away. These lasers include a magnetic target, which you can mount at the height you need to reflect the beam, making it brighter and easier to see from a distance.

Twist the head to switch between a dot, a horizontal line, or a vertical line. Project accurate level references onto walls when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

This level projects three dots simultaneously to verify your installation is straight, level, and plumb. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

These kits include a laser, a beam splitter, and a leveling plate. Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. The beam splitter converts one dot into two dots that are set at a 90° angle. Use the leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Add a leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Mark a dot up to 500 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. These lasers are also known as torpedo levels.

Red lasers are dimmer than green lasers, so they’re best viewed indoors.

Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.

Use a leveling plate for mounting the laser to a tripod, or placing it on a surface. The plate has three adjustable legs to level the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle. The laser lines are best viewed indoors.

Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.