Maximum Measurement Maximum Measurement |
---|
Overall Length Overall Length |
---|
Orientation Orientation |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Material Material |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Battery Type Battery Type |
---|
|
Linear Scales with Digital Readout

This digital readout (DRO) system displays precise positioning on one axis. For use with machines that perform dry machining and cutting applications, such as table saws, band saws, planers, and drill presses. These scales have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the scale is off. A zero-set button lets you start measuring at any point.
Measuring Range | Measuring Increments | Accuracy | Overall | Mount. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric, mm | Inch | Metric, mm | Lg. | Wd. | Material | Power Source | Batteries Included | No. of Holes | Hardware Included | Each | |
0"-10" | 0-250mm | 0.001" | 0.01 | ±0.002" | ±0.05 | 14 1/4" | 3/4" | Aluminum | Battery | Yes | 1 | Yes | 0000000 | 0000000 |
0"-18" | 0-450mm | 0.001" | 0.01 | ±0.003" | ±0.070 | 22 1/4" | 3/4" | Aluminum | Battery | Yes | 1 | Yes | 0000000 | 000000 |
0"-52" | 0-1.3m | 0.001" | 0.01 | ±0.008" | ±0.2 | 56" | 2" | Aluminum | Battery | Yes | 10 | Yes | 0000000 | 000000 |
0"-96" | 0-2.4m | 0.001" | 0.01 | ±0.008" | ±0.2 | 100" | 2" | Aluminum | Battery | Yes | 14 | Yes | 0000000 | 000000 |
Replacement 3-Volt Lithium Battery (Pkg. of 1) | 0000000 | 00000 |
Linear Scales with Digital Readout for Lathes

Mount one of these digital readout (DRO) systems onto your manual lathe to increase its accuracy. They measure and display precise tool positioning on two axes.
Measuring Range | Measuring Increments | Accuracy | Scale Lg. | Scale Wd. | No. of Mount. Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
X-Axis | Z-Axis | X-Axis | Z-Axis | X-Axis | Z-Axis | X-Axis | Z-Axis | X-Axis | Z-Axis | Power Source | Electrical Connection Type | Voltage | X-Axis | Z-Axis | Mount. Hardware Included | Each | |
0"-6" | 0"-20 | 0.00004" | 0.00004" | ±0.0001" | ±0.0002" | 10 21/32" | 26 3/8" | 1 3/16" | 1 7/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 000000000 |
0"-8" | 0"-40 | 0.0002" | 0.0002" | ±0.0002" | ±0.0002" | 12 21/32" | 46 3/8" | 1 3/16" | 1 7/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 00000000 |
0"-10" | 0"-40 | 0.0002" | 0.0002" | ±0.0002" | ±0.0002" | 14 21/32" | 46 3/8" | 1 3/16" | 1 7/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 00000000 |
Linear Scales with Digital Readout and Fence for Saws

Install a digital readout (DRO) stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.
Measuring Range | Measuring Increments | Accuracy | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Fractional Increments | Inch | Metric, mm | For Axis | Lg. | Wd. | Power Source | Batteries Included | Mount. Hardware Included | Each | |
0"-94" | 0-2,400 | 0.001" | 0.01 | 1/64" | ±0.01" | ±0.25 | X | 100" | 8.38" | Battery | Yes | Yes | 0000000 | 000000000 |
Replacement 3-Volt Lithium Battery (Pkg. of 1) | 0000000 | Pkg. | 00000 |
Linear Scales with Digital Readout for Milling Machines

Improve the accuracy of your manual milling machine when you retrofit it with one of these digital readout (DRO) systems. They measure and display precise tool positioning on two axes.
Measuring Range | Measuring Increments | Accuracy | Scale Lg. | Scale Wd. | No. of Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
X-Axis | Y-Axis | X-Axis | Y-Axis | X-Axis | Y-Axis | X-Axis | Y-Axis | X-Axis | Y-Axis | Overall Lg. | Power Source | Electrical Connection Type | Voltage | X-Axis | Y-Axis | Mount. Hardware Included | Each | |
0"-32" | 0"-13" | 0.0002" | 0.0002" | ±0.0002" | ±0.0002" | 38 3/8" | 19 3/8" | 1 7/8" | 7/16" | 38 3/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 000000000 |
0"-35" | 0"-13" | 0.0002" | 0.0002" | ±0.0002" | ±0.0002" | 41 3/8" | 19 3/8" | 1 7/8" | 7/16" | 41 3/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 00000000 |
0"-36" | 0"-13" | 0.0002" | 0.0002" | ±0.0002" | ±0.0002" | 42 3/8" | 19 3/8" | 1 7/8" | 7/16" | 42 3/8" | Electric | Hardwire | 5.1V DC | 2 | 2 | Yes | 0000000 | 00000000 |
Linear Scales
Increase the accuracy of your manual machine when you fit it with a linear scale. These scales have an LCD that displays exact positioning on one axis. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the scale is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
053906B model comes with mounting brackets for installation on Bridgeport-type milling machines. It requires a 10-pin data cable and Mitutoyo 10-Pin to USB adapter to connect to your PC.
USB data cable (sold separately) connects the scale directly to your PC.
10-pin data cables (sold separately) connect the scale to a Mitutoyo miniprocessor or multiplexer.
Mitutoyo 10-Pin to USB Adapter (sold separately) adapts Mitutoyo 10-pin SPC cables for connection to a USB port on your PC.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from a scale to your PC without being tethered by a cable.
Display freeze adapter (sold separately) keeps the measurement displayed on the LCD even if the encoder is repositioned.


Measuring Range | Measuring Increments | Accuracy | Overall | Mount. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Lg. | Wd. | Material | Batteries Included | Measuring Tool Connection Type | No. of Holes | Hardware Included | Manufacturer Model No. | Each | |
Horizontal Orientation | |||||||||||||||
0"-4" | 0-100 | 0.0005" | 0.01 | ±0.001" | ±0.03 | 8 1/4" | 1 7/32" | Stainless Steel | Yes | Data Out Switch C | 2 | No | 572-210-30 | 00000000 | 0000000 |
0"-6" | 0-150 | 0.0005" | 0.01 | ±0.001" | ±0.03 | 10 3/16" | 1 1/2" | Stainless Steel | Yes | Data Out Switch C | 2 | No | 572-211-30 | 00000000 | 000000 |
0"-12" | 0-300 | 0.0005" | 0.01 | ±0.002" | ±0.040 | 17 31/64" | 1 19/32" | Stainless Steel | Yes | Data Out Switch C | 2 | Yes | 572-213-10 | 00000000 | 000000 |
0"-24" | 0-600 | 0.0005" | 0.01 | ±0.002" | ±0.05 | 30 31/64" | 1 21/32" | Stainless Steel | Yes | Straight | 2 | Yes | 572-475 | 00000000 | 000000 |
Vertical Orientation | |||||||||||||||
0"-5" | 0-125 | 0.0005" | 0.01 | ±0.001" | ±0.03 | 6" | 1.4" | Stainless Steel | Yes | Straight | 2 | Yes | 053906B | 00000000 | 000000 |
0"-6" | 0-150 | 0.0005" | 0.01 | ±0.001" | ±0.03 | 8" | 1.4" | Stainless Steel | Yes | Data Out Switch C | 2 | Yes | 572-311-10 | 00000000 | 000000 |
0"-12" | 0-300 | 0.0005" | 0.01 | ±0.002" | ±0.040 | 14" | 1.4" | Stainless Steel | Yes | Data Out Switch C | 2 | Yes | 572-313-10 | 00000000 | 000000 |
Measuring Tool Connection Type | Lg. | Each | ||
USB Cable | Data Out Switch C | 80" | 000000 | 0000000 |
USB Cable | Straight | 80" | 000000 | 000000 |
10-Pin Cable | Data Out Switch C | 40" | 0000000 | 00000 |
10-Pin Cable | Data Out Switch C | 80" | 00000000 | 00000 |
10-Pin Cable | Straight | 40" | 00000000 | 00000 |
10-Pin Cable | Straight | 80" | 00000000 | 00000 |
Wireless Transmitter | Data Out Switch C | 1 3/4" | 000000 | 000000 |
Wireless Transmitter | Straight | 1 3/4" | 000000 | 000000 |
Wireless Receiver | __ | 5 1/2" | 000000 | 000000 |
Display Freeze Adapter | __ | __ | 00000000 | 00000 |
Replacement Button Cell Battery | __ | __ | 00000000 | 0000 |
Mitutoyo 10-Pin to USB Adapters | __ | 2 1/2" | 0000000 | 000000 |
Dial Hanging Scales

Overall | Top Hook Opening | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | Capacity | Accuracy | Graduations | Ht. | Wd. | Dp. | Ht. | Wd. | Each | |
Pounds | ||||||||||
E | 200 lbs. | ±2 lbs. | 2 lbs. | 19 5/8" | 2 1/4" | 2 1/4" | 3" | 1" | 0000000 | 0000000 |
Tension and Compression Force Gauges for Tight Spaces

A slim design allows these gauges to fit in hard-to-reach areas. Housing is brass. Activate the peak-hold setting to retain the highest reading on the display.
Capacity | Accuracy | Measuring Increments | |||||||
---|---|---|---|---|---|---|---|---|---|
English | Metric | English | Metric | English | Metric | Ht. | Dia. | Each | |
1 lbs. | 500 g | ±0.25 oz. | ±5 g | 1/4 oz. | 5 g | 17" | 5/8" | 0000000 | 0000000 |
2 lbs. | 1,000 g | ±0.5 oz. | ±10 g | 1/2 oz. | 10 g | 17" | 5/8" | 0000000 | 000000 |
5 lbs. | 2.25 kg | ±1 oz. | ±0.05 kg | 1 oz. | 0.05 kg | 18 1/2" | 7/8" | 0000000 | 000000 |
10 lbs. | 4.5 kg | ±2 oz. | ±0.05 kg | 2 oz. | 0.05 kg | 18 1/2" | 7/8" | 0000000 | 000000 |
20 lbs. | 9 kg | ±4 oz. | ±0.1 kg | 4 oz. | 0.1 kg | 18 1/2" | 7/8" | 0000000 | 000000 |
40 lbs. | 18 kg | ±8 oz. | ±0.2 kg | 8 oz. | 0.2 kg | 18 1/2" | 7/8" | 0000000 | 000000 |
Strain Gauges
Glue these gauges onto a structure to measure strain in a single direction. They’re often used in structural testing and monitoring applications. Strain is the deformation or displacement of material caused by force.
Solder wire leads onto gauges with solder terminals after the gauge has bonded to your surface. After soldering, apply a protective coating.
Gauges with wire leads save you the effort of soldering wire to the gauge and checking to see that it’s bonded securely.
For technical drawings and 3-D models, click on a part number.



Grid | Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Resistance, ohms | Accuracy | Length | Width | Length | Width | Wire Lead Length, ft. | Material | Temperature Range, °F | Pkg. Qty. | Pkg. | |
Solder Terminals | |||||||||||
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
350 | ±0.2% | 0.125" | 0.1" | 0.275" | 0.12" | __ | C70600 Copper Nickel | -100° to 350° | 5 | 0000000 | 000000 |
Two Wire Leads | |||||||||||
For Use With Aluminum, Brass, Tin | |||||||||||
120 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
120 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
120 | ±0.3% | 0.125" | 0.1" | 0.205" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
120 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
350 | ±0.3% | 0.125" | 0.1" | 0.205" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Composites, Nickel Iron, Titanium Silicate | |||||||||||
350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
Three Wire Leads | |||||||||||
For Use With Aluminum, Brass, Tin | |||||||||||
350 | ±0.2% | 0.03" | 0.063" | 0.095" | 0.063" | 3 | Nickel Chromium | -100° to 400° | 1 | 0000000 | 00000 |
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
350 | ±0.2% | 0.03" | 0.063" | 0.095" | 0.063" | 9 | Nickel Chromium | -100° to 400° | 1 | 0000000 | 00000 |
350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 9 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Composites, Nickel Iron, Titanium Silicate | |||||||||||
350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 9 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |

Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temperature Range, °F | For Use On | Includes | Each | |
1 | Bottle | 1 min. | 5 min. | Thin Liquid (130 cP) | -25° to 150° | Aluminum, Composites, Glass, Steel | Catalyst | 0000000 | 000000 |

Width | Length, ft. | Color | Temperature Range | Features | Each | |
3/4" | 216 | Clear | 400° F | Tape Dispenser | 0000000 | 0000000 |

Dry Time | |||||
---|---|---|---|---|---|
Container Size, fl. oz. | Touch, min. | Overall, hrs. | Pkg. Qty. | Pkg. | |
1 | 20 | 2 | 4 | 0000000 | 000000 |
Economy Tension and Compression Force Gauges for Tight Spaces

A slim design allows these gauges to fit in hard-to-reach areas. Housing is plastic.
Capacity | Accuracy | Measuring Increments | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
English | Metric | English | Metric | English | Metric | Ht. | Wd. | Dp. | Each | |
8 oz. | 220 g | ±0.25 oz. | ±5 g | 1/4 oz. | 5 g | 14" | 1 1/2" | 1" | 0000000 | 000000 |
36 oz. | 1,020 g | ±0.5 oz. | ±20 g | 1/2 oz. | 20 g | 14" | 1 1/2" | 1" | 0000000 | 00000 |
72 oz. | 2,025 g | ±1 oz. | ±25 g | 1 oz. | 25 g | 14" | 1 1/2" | 1" | 0000000 | 00000 |
15 lbs. | 6,804 g | ±4 oz. | ±100 g | 4 oz. | 100 g | 14" | 1 1/2" | 1" | 0000000 | 00000 |