Static Load Capacity Static Load Capacity |
|---|
|
Handle Type Handle Type |
|---|
|
Overall Length Overall Length |
|---|
Overall Height Overall Height |
|---|
Overall Width Overall Width |
|---|
Carriage Width Carriage Width |
|---|
Bearing Material Bearing Material |
|---|
|
Carriage Length Carriage Length |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
Handle Diameter Handle Diameter |
|---|
Straight Line Travel Accuracy Straight Line Travel Accuracy |
|---|
|
Locking Positioning Tables with Micrometer
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 5 | 6mm | 25mm | 57.9mm | 13.5mm | 19.1mm | 19.1mm | 10mm | 0.01mm | 180° | 8 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 6 | 0.5" | 1.63" | 3.34" | 0.5" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 000000 |
| 25 | 0.5" | 2.13" | 4.47" | 0.75" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 3" | 6.94" | 1" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 000000 |
Positioning Tables with Micrometer
The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 0.5" | 1.25" | 3.36" | 0.38" | 1.25" | 1.25" | 0.41" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 00000000 | 0000000 |
| 12 | 0.5" | 1.5" | 3.55" | 0.62" | 1.5" | 1.5" | 0.41" | 0.001" | 180° | 4 | 4-40 | 2 | 4-40 | No | 00000000 | 000000 |
| 20 | 0.5" | 1.75" | 4.08" | 0.75" | 1.75" | 1.75" | 0.52" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 20 | 1" | 1.75" | 6" | 0.75" | 1.75" | 1.75" | 0.7" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 30 | 2" | 4.12" | 10.98" | 0.91" | 4.12" | 4.12" | 0.83" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 60 | 1" | 2.62" | 6.88" | 1" | 2.62" | 2.62" | 0.7" | 0.001" | 180° | 8 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 100 | 1" | 5" | 9.31" | 1" | 5" | 5" | 0.7" | 0.001" | 155° | 12 | 1/4"-20 | 2 | 1/4"-20 | No | 0000000 | 000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 13 | 31.8 | 82.6 | 9.7 | 31.8 | 31.8 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 4 | 13 | 44.5 | 95.3 | 9.7 | 44.5 | 44.5 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 00000000 | 000000 |
| 12 | 13 | 38.1 | 88.9 | 15.7 | 38.1 | 38.1 | 10.4 | 0.01 | 180° | 4 | M3 | 2 | M3 | No | 00000000 | 000000 |
| 20 | 13 | 44.5 | 111.3 | 19.1 | 44.5 | 44.5 | 13.2 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 00000000 | 000000 |
| 20 | 25 | 44.5 | 149.4 | 19.1 | 44.5 | 44.5 | 17.8 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 00000000 | 000000 |
| 30 | 50 | 104.6 | 260.4 | 23.1 | 104.6 | 104.6 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 30 | 50 | 130.2 | 285.8 | 23.1 | 130.2 | 130.2 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 60 | 13 | 66.5 | 133.4 | 25.4 | 66.5 | 66.5 | 13.2 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 00000000 | 000000 |
| 60 | 25 | 66.5 | 171.5 | 25.4 | 66.5 | 66.5 | 17.8 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 00000000 | 000000 |
Two-Axis Positioning Tables with Micrometers
The micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 0.5" | 3.36" | 3.36" | 0.75" | 1.25" | 1.25" | 0.41" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 00000000 | 0000000 |
| 12 | 0.5" | 3.55" | 3.55" | 1.25" | 1.5" | 1.5" | 0.41" | 0.001" | 180° | 4 | 4-40 | 2 | 4-40 | No | 00000000 | 000000 |
| 20 | 0.5" | 4.08" | 4.08" | 1.5" | 1.75" | 1.75" | 0.52" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 20 | 1" | 6" | 6" | 1.5" | 1.75" | 1.75" | 0.7" | 0.001" | 180° | 6 | 6-32 | 2 | 6-32 | No | 00000000 | 000000 |
| 30 | 2" | 10.56" | 10.56" | 1.82" | 4.12" | 4.12" | 0.7" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 60 | 1" | 6.88" | 6.88" | 2" | 2.62" | 2.62" | 0.7" | 0.001" | 180° | 8 | 10-32 | 2 | 10-32 | No | 00000000 | 000000 |
| 100 | 1" | 9.31" | 9.31" | 2" | 5" | 5" | 0.7" | 0.001" | 155° | 12 | 1/4"-20 | 2 | 1/4"-20 | No | 0000000 | 00000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 4 | 13 | 82.6 | 82.6 | 19 | 31.8 | 31.8 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 000000000 | 0000000 |
| 4 | 13 | 96.3 | 95.3 | 19 | 44.5 | 44.5 | 10.4 | 0.01 | 180° | 10 | M2 | 4 | M2 | No | 000000000 | 000000 |
| 12 | 13 | 88.9 | 88.9 | 31.8 | 38.1 | 38.1 | 10.4 | 0.01 | 180° | 4 | M3 | 2 | M3 | No | 000000000 | 000000 |
| 20 | 13 | 111.3 | 111.3 | 38.1 | 44.5 | 44.5 | 13.2 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 000000000 | 000000 |
| 20 | 25 | 149.4 | 149.4 | 38.1 | 44.5 | 44.5 | 17.8 | 0.01 | 180° | 6 | M4 | 2 | M4 | No | 000000000 | 000000 |
| 30 | 50 | 260.4 | 260.4 | 46.2 | 104.6 | 104.6 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 30 | 50 | 285.8 | 285.8 | 46.2 | 130.2 | 130.2 | 17.8 | 0.01 | 180° | 10 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 60 | 13 | 133.4 | 133.4 | 50.8 | 66.5 | 66.5 | 13.2 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 000000000 | 000000 |
| 60 | 25 | 171.5 | 171.5 | 50.8 | 66.5 | 66.5 | 17.8 | 0.01 | 180° | 8 | M5 | 2 | M5 | No | 000000000 | 000000 |
Locking Two-Axis Positioning Tables with Micrometers
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 5 | 6mm | 57.9mm | 57.9mm | 26.9mm | 19.1mm | 19.1mm | 1mm | 0.01mm | 180° | 8 | M2 | 4 | M2 | No | 00000000 | 0000000 |
| 6 | 0.5" | 3.72" | 3.34" | 1" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 000000 |
| 25 | 0.5" | 4.85" | 4.47" | 1.5" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 7.32" | 6.94" | 2" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 00000000 |
Three-Axis Positioning Tables with Micrometers
The micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 1 | 0.5" | 3.25" | 3.63" | 3.87" | 1.25" | 1.25" | 0.42" | 0.001" | 180° | 10 | 2-56 | 4 | 2-56 | No | 0000000 | 0000000 |
| 20 | 0.5" | 4.62" | 5.74" | 5.12" | 1.75" | 2" | 0.54" | 0.001" | 180° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 30 | 1" | 7.25" | 7.25" | 9.83" | 3.12" | 3.12" | 0.71" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 0000000 | 00000000 |
| 30 | 2" | 10.25" | 10.25" | 13.33" | 4.12" | 4.12" | 0.62" | 0.001" | 180° | 10 | 10-32 | 2 | 10-32 | No | 0000000 | 00000000 |
O'all | Carriage | Carriage Mounting | Base Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg., mm | Wd., mm | Lg., mm | Ht., mm | Wd., mm | Lg., mm | Handle Dia., mm | Micrometer Graduation Marks, mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | |||||||||||||||||
| 1 | 13 | 82.6 | 92.3 | 98.3 | 31.8 | 31.8 | 10.7 | 0.01 | 180° | 10 | M2 | 0.4 | 4 | M2 | No | 00000000 | 0000000 |
| 20 | 13 | 117.3 | 145.7 | 130 | 44.5 | 50.8 | 13.6 | 0.01 | 180° | 8 | M4 | 0.7 | 2 | M4 | No | 00000000 | 000000 |
| 30 | 25 | 184.2 | 184.2 | 249.7 | 79.2 | 79.2 | 18 | 0.01 | 180° | 10 | M5 | 0.8 | 2 | M5 | No | 00000000 | 00000000 |
| 30 | 50 | 260.4 | 260.4 | 338.6 | 104.6 | 104.6 | 15.8 | 0.01 | 180° | 10 | M5 | 0.8 | 2 | M5 | No | 00000000 | 00000000 |
High-Load Positioning Slides
Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides. They have a precision lead screw for use in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drililng, fastening, assembly, and measuring.
Travel distance per turn, also known as screw lead, is the distance the carriage moves with one revolution of the handle.
Two-axis mounting plates (sold separately) let you mount two slides together for motion along two axes.
For technical drawings and 3-D models, click on a part number.
Positioning Slides | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all, mm | Carriage, mm | Handle | Carriage Mounting | Base Mounting | Mounting Plates | ||||||||||||||
| Travel Lg. | Travel Distance per Turn | Accuracy for Travel Distance per Turn | Ht., mm | Wd. | Lg. | Wd. | Lg. | Type | Handle Dia., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | Each | ||
Aluminum Carriage and Base | |||||||||||||||||||
490 lbs. Static Load Capacity | |||||||||||||||||||
| 4.35" | 0.05" | 0.0006" per in. | 16 | 46 | 188.4 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 4 | M3 | No | 0000000 | 0000000 | 0000000 | 000000 |
| 10.35" | 0.05" | 0.0006" per in. | 16 | 46 | 336.6 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 8 | M3 | No | 0000000 | 000000 | 0000000 | 00000 |
| 16.35" | 0.05" | 0.0006" per in. | 16 | 46 | 489 | 46 | 42 | Dial | 10.3 | 175° | 4 | M3 | 12 | M3 | No | 0000000 | 000000 | 0000000 | 00000 |
800 lbs. Static Load Capacity | |||||||||||||||||||
| 3.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 187.9 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 3 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
| 9.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 340.2 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 5 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
| 15.56" | 0.05" | 0.0006" per in. | 25 | 45.8 | 492.6 | 45.8 | 62 | Dial | 18.3 | 175° | 4 | M4 | 8 | M5 | No | 0000000 | 000000 | 0000000 | 00000 |
Fine-Adjust Cross-Slide Tables
Precisely position work on X- and Y-axes using the handles.
Tilting tables position work at any angle up to 90°.
50-lb. capacity tables have a keyway for accurately positioning the table on your machine.
150-lb. capacity tables have handles at both ends so you can position work from either side.
Table | Base | Max. Travel | X-Axis T-Slots | Y-Axis T-Slots | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Lg. | Wd. | X-Axis | Y-Axis | X- and Y-Axis Adjustment Dial Graduations | Keyway Size | Overall Ht. | No. of | Wd. | Ctr.-to-Ctr. | No. of | Wd. | Ctr.-to-Ctr. | Flatness Tolerance | Material | Mounting Fasteners Included | Each | |
Standard 50-lb. Capacity | |||||||||||||||||||
| 10" | 6" | 6 3/8" | 7 5/8" | 6" | 4" | 0.001" | 5/8" | 4 3/8" | 1 | 7/16" | __ | 3 | 7/16" | 2 1/2" | 0.001" | Iron | No | 000000 | 0000000 |
Standard 150-lb. Capacity | |||||||||||||||||||
| 18 5/8" | 6" | 7 1/8" | 12" | 12" | 8" | 0.001" | __ | 5 1/4" | 2 | 1/2" | 2 3/8" | __ | __ | __ | 0.002" | Iron | No | 0000000 | 000000 |
Tilting 50-lb. Capacity | |||||||||||||||||||
| 12" | 6" | 5" | 9" | 8" | 4" | 0.001" | 5/8" | 4 5/8" | 1 | 7/16" | __ | 3 | 7/16" | 3" | 0.001" | Iron | No | 000000 | 000000 |
Fine-Adjust Rotary Cross-Slide Tables
Rotate work 360° and precisely position it on X- and Y-axes by turning the handles. Use the keyway to accurately position the table on your machine.
Tilting tables position work at any angle up to 90°.
Base | Max. Travel | T-Slots | Rotation Graduations | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Table Dia. | Load Capacity, lbs. | Lg. | Wd. | X-Axis | Y-Axis | X- and Y-Axis Adjustment Dial Graduations | Keyway Size | Overall Ht. | No. of | Wd. | Center Bore Dia. | Adjustment Dial | Table | Flatness Tolerance | Material | Each | |
Standard | |||||||||||||||||
| 8" | 50 | 6 1/4" | 7 1/2" | 4" | 4" | 0.001" | 5/8" | 5 1/2" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 000000000 |
| 10" | 50 | 6 1/4" | 7 1/2" | 4" | 4" | 0.001" | 5/8" | 5 3/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
Tilting | |||||||||||||||||
| 8" | 50 | 5" | 9" | 4" | 4" | 0.001" | 5/8" | 5" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
| 10" | 50 | 5" | 9" | 4" | 4" | 0.001" | 5/8" | 5 3/4" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
Fine-Adjust Rotary Tables
Turn the handles to rotate work 360°. These tables can be mounted horizontally or vertically and have a keyway for accurate positioning on your machine.
Base | T-Slots | Rotation Graduations | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Table Dia. | Load Capacity, lbs. | Lg. | Wd. | Keyway Size | Overall Ht. | No. of | Wd. | Center Bore Dia. | Adjustment Dial | Table | Flatness Tolerance | Material | Mounting Fasteners Included | Each | |
| 8" | 50 | 12" | 9 1/2" | 5/8" | 3 7/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.002" | Iron | No | 000000 | 0000000 |
| 10" | 50 | 12" | 9 1/2" | 5/8" | 3 7/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.002" | Iron | No | 000000 | 000000 |