Quickly increase and release tension over loads: lift the cam on the buckle, pull the webbing through, and release the cam to hold webbing in place.

Use couplings to connect straps or convert end fittings from male to female.

These aluminum beams provide lightweight decking and bracing.

Contain and organize bulky and oddly shaped loads with these nets.

These bags snap into track to create easy storage.

Press the button to retract the webbing for easy storage.

The track fitting attaches to snap-in load-securing track, also known as E-track.

Protect loads with this high-strength webbing that stretches to minimize shock to a load.

This webbing resists abrasion caused by sharp corners and edges.

A nylon core makes this webbing stronger than standard cotton webbing.

This slip-resistant webbing remains flexible, even in low temperatures, and is easy to clean.

Sunlight and salt water are no match for this webbing that also resists chemicals and abrasion.

Attach webbing to these buckles without sewing.

Permanently sew webbing onto these buckles.

Add a slide to webbing to make adjustable straps.

The base of these hooks grip rope.

A buckle tightly grips the webbing on these hooks.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

Bolt these tie downs directly to a surface or mount them with a hook, bracket, or cargo track fitting.

A polyurethane strap on one end of these tie downs stretches and contracts to maintain even tension when loads shift.

Use these seatbelt-style straps to secure loads with a click.

Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.

Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.

This cord has excellent stretch recovery and won't become brittle.

The thick wire coil on these hooks makes them stronger than standard hooks.

Attach these hooks to elastic cord to make a tie down.

Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.

With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.

Shorten the length of the tie downs between the hooks.

These tie downs won't become brittle or hard after exposure to sunlight.

Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.

Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.

Also known as tarp straps, these tie downs stand up to wet weather and sunlight.

Pull the lever on these binders to quickly take up slack.

Also known as Type 3 slings, the eyes lie in a flat position for easy removal from beneath loads.

Also known as Type 4 slings, the eyes are turned 90° so they can form a choker configuration more easily than with flat-eye slings.

Slings have plastic-coated fibers woven into the edges for added abrasion resistance.

Increase the life of slings by positioning these protectors over areas prone to wear.

Slings have plastic-coated fibers woven into the edges for added abrasion resistance.

Also known as Type 5 and endless slings, these slings last longer than slings with eyes because they can be rotated to change the load-bearing point.

Also known as Type 3 slings, the flat eye on each end allows the sling to quickly change into the choker, vertical, or basket configuration.

The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.

Cut rolls to length and add the no-sew buckle.

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Secure and separate two bundles with the same tie.

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.

Formed to the shape of a round bundle, these ties close with a single twist of the top.

Secure large bundles such as lumber, cardboard, and wire coils.

Bundle, close, and label bags and sacks.

Ties come on a spool for use in a twist tie machine.

Use the built-in blade to remove excess length once these ties are secure.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

Secure and separate parallel bundles with the same tie.

These strong, wide ties are often used as an alternative to metal strapping.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Create custom-length cable ties for large bundles and heavy materials.