An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Close and open these grab latches with a push—there's no need for a handle.

Doors stay closed with the pressure of rollers against the strike plate.

To prevent doors from slamming, these latches are hydraulic.

Magnetic force holds doors closed.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Keep doors on refrigerators and industrial enclosures closed.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

No need for a strike plate, these latches hook into a lip or notch.

To prevent accidental opening, these latches have a safety catch.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

These latches are typically used to secure hoods and covers.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Each latch comes with a variety of strike plates for different mounting options.

The latch arm is coated with vinyl so it won't scratch surfaces.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Draw lightweight surfaces together with these latches.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Open several draw locks with the same key.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

Choose these locks if you need several locks that open with the same key.

Choose these locks if you need several locks that open with the same key.

Each of these cabinet locks opens with its own key.

Open multiple cabinet locks with the same key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Open multiple cabinet locks with their own keys, as well as with a master key.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Open each of these drawer locks with a different key.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Made of plastic, these locks are suitable for damp and humid environments.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Designed for use in 1/2" dia. through holes.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Designed for use in 1/2" dia. through holes.

Meet U.S. postal service guidelines for mailbox locks.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.