Carriage Width Carriage Width |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
Carriage Length Carriage Length |
|---|
Bearing Material Bearing Material |
|---|
|
Carriage and Guide Rail Type Carriage and Guide Rail Type |
|---|
|
Lubrication Lubrication |
|---|
|
Static Pitch Moment Load Capacity Static Pitch MomentLoad Capacity |
|---|
|
Static Roll Moment Load Capacity Static Roll MomentLoad Capacity |
|---|
|
|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
|
|
Static Yaw Moment Load Capacity Static Yaw MomentLoad Capacity |
|---|
|
Overall Width Overall Width |
|---|
Mounting Hole Depth Mounting Hole Depth |
|---|
|
|
About Moment Loads
More
Locking Sleeve Bearing Carriages and Guide Rails
A handle on the side of the carriage locks the carriage in place. With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.
Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages and PTFE Plastic Bearings | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Wd., mm | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Handle Dia., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
| 15 | 900 | 63 | 24 | 47 | 68 | 20 | 190° | 4 | M5 | 0.8 | 16 | No | 000000 | 000000 | 0000000 | 00000 | |
| 20 | 1,650 | 80 | 30 | 63 | 81 | 28 | 190° | 4 | M6 | 1 | 19.8 | No | 000000 | 00000 | 0000000 | 000 | |
| 23 | 2,200 | 86 | 36 | 70 | 90 | 28 | 190° | 4 | M8 | 1.25 | 24.8 | No | 000000 | 00000 | 0000000 | 000 | |
| 30 | 3,100 | 110 | 42 | 90 | 103 | 28 | 190° | 4 | M10 | 1.5 | 27 | No | 000000 | 000000 | 0000000 | 000 | |
Locking Extra-Wide Sleeve Bearing
Carriages and Guide Rails
A handle on the side of the carriage locks the carriage in place. Carriages have a wide base for stabilizing moment (twisting) and off-center loads better than standard sleeve bearing carriages. Use them in areas where multiple carriages or rails won't fit. The sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.
Aluminum carriages conduct and dissipate the heat produced by friction, protecting your machinery. They are more corrosion resistant than zinc carriages.
Zinc carriages are mildly corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages and PTFE Plastic Bearings | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Wd., mm | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Handle Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Round | |||||||||||||||||
| 40 | 1,050 | 101 | 24 | 73 | 100 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 0000000 | 0000000 | 00000 | |
| 40 | 1,050 | 101 | 24 | 73 | 150 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 000000 | 0000000 | 000 | |
Zinc Carriages and PTFE Plastic Bearings | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Wd., mm | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Handle Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Square | |||||||||||||||||
| 27 | 370 | 82 | 18 | 54 | 60 | 28 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 000000 | 0000000 | 00000 | |
| 27 | 370 | 82 | 18 | 54 | 80 | 28 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 00000 | 0000000 | 000 | |
Round | |||||||||||||||||
| 40 | 1,050 | 101 | 24 | 73 | 100 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 000000 | 0000000 | 000 | |
| 40 | 1,050 | 101 | 24 | 73 | 150 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 000000 | 0000000 | 000 | |
| 40 | 1,050 | 101 | 24 | 73 | 200 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 000000 | 0000000 | 000 | |
| 54 | 1,880 | 132 | 35 | 104 | 150 | 40 | 190° | 4 | M8 | 1.25 | 30 | No | 00000000 | 000000 | 0000000 | 000 | |
| 54 | 1,880 | 132 | 35 | 104 | 200 | 40 | 190° | 4 | M8 | 1.25 | 30 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 1,050 | 147 | 24 | 107 | 100 | 40 | 190° | 4 | M6 | 1 | 19 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 2,850 | 174 | 44 | 134 | 150 | 40 | 190° | 4 | M8 | 1.25 | 38 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 2,870 | 174 | 44 | 134 | 250 | 40 | 190° | 4 | M8 | 1.25 | 38 | No | 00000000 | 000000 | 0000000 | 000 | |
Sleeve Bearing Carriages for T-Slotted Framing
Mate with a T-slotted rail to add linear motion to your assembly. Carriages are suitable for washdown environments. Note: Carriages cannot be used upside down, vertically, or on their side.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Carriages have mounting holes for the brakes.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages | Hand Brakes | T-Slot Fasteners | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Bearing Material | Max. Temp., °F | Each | Each | Pkg. Qty. | Pkg. | |||
For Single Rail | |||||||||||||
| 1" | 90 | 2 15/16" | 1 7/8" | 1 1/4" | UHMW Plastic | 180° | 00000000 | 000000 | 00000000 | 000000 | 4 | 000000000 | 00000 |
| 1" | 90 | 2 15/16" | 4" | 1 1/4" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 000000000 | 0000 |
| 1 1/2" | 90 | 4" | 2 13/16" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 1 1/2" | 90 | 4" | 6" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 45mm | 270 | 109mm | 80mm | 54mm | Acetal Plastic | 180° | 00000000 | 000000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 45mm | 540 | 109mm | 160mm | 54mm | Acetal Plastic | 180° | 00000000 | 000000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
For Double Rail | |||||||||||||
| 2" | 120 | 3 15/16" | 1 7/8" | 1 1/4" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 000000000 | 0000 |
| 2" | 120 | 3 15/16" | 4" | 1 1/4" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 000000000 | 0000 |
| 3" | 120 | 5 1/2" | 2 13/16" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 3" | 120 | 5 1/2" | 6" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
Heavy Duty Sleeve Bearing
Carriages for T-Slotted Framing
Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops. Carriages are suitable for washdown environments. Mate with a T-slotted rail to add linear motion to your assembly. Note: Carriages cannot be used upside down, vertically, or on their side.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Drill a hole in the carriage to mount.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages | Hand Brakes | T-Slot Fasteners | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Bearing Material | Max. Temp., °F | Each | Each | Pkg. Qty. | Pkg. | |||
For Single Rail | |||||||||||||
| 1 1/2" | 90 | 4" | 2 13/16" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 000000 | 00000000 | 000000 | 4 | 00000000 | 00000 |
| 1 1/2" | 90 | 4" | 6" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
For Double Rail | |||||||||||||
| 3" | 120 | 5 1/2" | 2 13/16" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 3" | 120 | 5 1/2" | 6" | 1 7/8" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
Heavy Duty Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing
Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops. Fasten loads on the side of the carriage and add linear motion to a T-slot assembly. Carriages are suitable for washdown environments.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Drill a hole in the carriage to mount.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages | Hand Brakes | T-Slot Fasteners | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Ht. | Bearing Material | Max. Temp., °F | Each | Each | Pkg. Qty. | Pkg. | |||
For Single Rail | ||||||||||||||
| 1 1/2" | 90 | 2 1/2" | 2 13/16" | 2 3/4" | 2" | UHMW Plastic | 180° | 00000000 | 000000 | 00000000 | 000000 | 4 | 00000000 | 00000 |
| 1 1/2" | 90 | 2 1/2" | 6" | 2 3/4" | 2" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing
Fasten loads on the side of these carriages and add linear motion to a T-slot assembly. Carriages are suitable for washdown environments.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Carriages have mounting holes for the brakes.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages | Hand Brakes | T-Slot Fasteners | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Ht. | Bearing Material | Max. Temp., °F | Each | Each | Pkg. Qty. | Pkg. | |||
Carriage for Single Rail | ||||||||||||||
| 1" | 90 | 1 5/8" | 1 7/8" | 2" | 1 5/16" | UHMW Plastic | 180° | 00000000 | 000000 | 00000000 | 000000 | 4 | 000000000 | 00000 |
| 1" | 90 | 1 5/8" | 4" | 2" | 1 5/16" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 000000000 | 0000 |
| 1 1/2" | 90 | 2 1/2" | 2 13/16" | 2 3/4" | 2" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
| 1 1/2" | 90 | 2 1/2" | 6" | 2 3/4" | 2" | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 00000000 | 0000 |
Locking High-Load Track Roller Carriages and Guide Rails
A handle on the side of the carriage locks the carriage in place. Made with needle-roller bearings, these track roller carriages have higher load capacities than other track roller carriages. Carriages can be adjusted for a snug or loose fit on the rail. Rollers are permanently lubricated to save maintenance time and effort.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages with Adjustable Steel Rollers | Anodized Aluminum Guide Rails | Replacement Clamp Jaw Kits | Replacement Locking Handles | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Wd., mm | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Handle Lg., mm | Max. Temp., °F | Max. Clamping Force, lbs. | Each | Rail Lengths, mm | Per mm | Each | Each | ||||
| 15.5 | 940 | 80 | 24 | 47 | 88 | 45 | 175° | 40 | 0000000 | 0000000 | 0000000 | 00000 | 0000000 | 0000000 | 0000000 | 000000 | |
| 21 | 1,200 | 63 | 30 | 63 | 102 | 45 | 175° | 55 | 0000000 | 000000 | 0000000 | 000 | 0000000 | 000000 | 0000000 | 00000 | |
| 23 | 2,000 | 103 | 36 | 70 | 108 | 45 | 175° | 55 | 0000000 | 000000 | 0000000 | 000 | 0000000 | 000000 | 0000000 | 00000 | |
| 32 | 2,800 | 142 | 48 | 100 | 145 | 78 | 175° | 75 | 0000000 | 000000 | 0000000 | 000 | 0000000 | 000000 | 0000000 | 00000 | |
| 45 | 4,700 | 120 | 60 | 120 | 175 | 78 | 175° | 165 | 0000000 | 000000 | 0000000 | 000 | 0000000 | 000000 | 000000 | 00 | |
Locking Positioning Tables with Micrometer
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 6 | 0.5" | 1.63" | 3.34" | 0.5" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 0000000 |
| 25 | 0.5" | 2.13" | 4.47" | 0.75" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 3" | 6.94" | 1" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 000000 |
Locking Two-Axis Positioning Tables with Micrometers
A knurled knob locks the slide without affecting its position. The micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
For technical drawings and 3-D models, click on a part number.
O'all | Carriage | Carriage Mounting | Base Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Static Load Cap., lbs. | Travel Lg. | Wd. | Lg. | Ht. | Wd. | Lg. | Handle Dia. | Micrometer Graduation Marks | Max. Temp., °F | No. of Holes | Hole Thread Size | No. of Holes | For Fastener Thread Size | Mounting Fasteners Included | Each | |
Aluminum Carriage and Base | ||||||||||||||||
| 6 | 0.5" | 3.72" | 3.34" | 1" | 1.25" | 1.28" | 0.55" | 0.001" | 155° | 6 | 4-40 | 2 | 4-40 | No | 0000000 | 0000000 |
| 25 | 0.5" | 4.85" | 4.47" | 1.5" | 1.75" | 1.75" | 0.55" | 0.001" | 155° | 8 | 6-32 | 2 | 6-32 | No | 0000000 | 000000 |
| 60 | 1" | 7.32" | 6.94" | 2" | 2.62" | 2.62" | 0.7" | 0.001" | 155° | 8 | 10-32 | 2 | 1/4"-20 | No | 0000000 | 00000000 |